Next Article in Journal
Automatic Segmentation of Osteonal Microstructure in Human Cortical Bone Using Deep Learning: A Proof of Concept
Next Article in Special Issue
Endangered Forest Communities in Central Europe: Mapping Current and Potential Distributions of Euro-Siberian Steppic Woods with Quercus spp. in South Slovak Basin
Previous Article in Journal
Abnormal Characterization and Distribution of Circulating Regulatory T Cells in Patients with Chronic Spinal Cord Injury According to the Period of Evolution
Previous Article in Special Issue
Soil Moisture and Available Phosphorus as the Factors Driving Variation in Functional Characteristics across Different Restoration Communities in a Subtropical Mountain Ecosystem
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Plant Traits Guide Species Selection in Vegetation Restoration for Soil and Water Conservation

1
Yunnan Key Laboratory for Plateau Mountain Ecology and Restoration of Degraded Environments, School of Ecology and Environmental Sciences, Yunnan University, Kunming 650091, China
2
Yunnan International Cooperative Center of Plateau Lake Ecological Restoration and Watershed Management, Kunming 650091, China
3
School of Agronomy and Life Sciences, Kunming University, Kunming 650214, China
*
Author to whom correspondence should be addressed.
These authors contributed equally to this work.
Biology 2023, 12(4), 618; https://doi.org/10.3390/biology12040618
Submission received: 9 February 2023 / Revised: 20 March 2023 / Accepted: 22 March 2023 / Published: 19 April 2023
(This article belongs to the Special Issue Ecological Restoration of Plant Community)

Abstract

:

Simple Summary

It is an important objective of ecological restoration to select suitable plant species in order to construct plant communities and achieve certain soil and water conservation capacities. Using species functional traits to construct a response-and-effect framework is a promising method for determining how species in changing environments will influence ecosystem functions. Here, we investigated plant functional traits, soil properties, and ecohydrological functions for the most common vegetation restoration types in mid-Yunnan, China, and used seven plant functional traits to identify seven plant functional effect types in relation to soil and water conservation capacity, and two plant functional response types to soil physicochemical properties. The results indicated that specific leaf area was the key trait not only for functional effect types, but also for functional response types. In addition, eight overlapping species between plant functional response types and functional effect types were selected as the key restoration species. These results provide a methodological guide for species selection for recovery, as well as a species inventory for the restoration of degraded ecosystems in this region.

Abstract

Great efforts have been made to improve the soil and water conservation capacity by restoring plant communities in different climatic and land-use types. However, how to select suitable species from local species pools that not only adapt to different site environments, but also achieve certain soil and water conservation capacities is a great challenge in vegetation restoration for practitioners and scientists. So far, little attention has been paid to plant functional response and effect traits related to environment resource and ecosystem functions. In this study, together with soil properties and ecohydrological functions, we measured the seven plant functional traits for the most common species in different restoration communities in a subtropical mountain ecosystem. Multivariate optimization analyses were performed to identify the functional effect types and functional response types based on specific plant traits. We found that the community-weighted means of traits differed significantly among the four community types, and the plant functional traits were strongly linked with soil physicochemical properties and ecohydrological functions. Based on three optimal effect traits (specific leaf area, leaf size, and specific root length) and two response traits (specific leaf area and leaf nitrogen concentration), seven functional effect types in relation to the soil and water conservation capacity (interception of canopy and stemflow, maximum water-holding capacity of litter, maximum water-holding capacity of soil, soil surface runoff, and soil erosion) and two plant functional response types to soil physicochemical properties were identified. The redundancy analysis showed that the sum of all canonical eigenvalues only accounted for 21.6% of the variation in functional response types, which suggests that community effects on soil and water conservation cannot explain the overall structure of community responses related to soil resources. The eight overlapping species between the plant functional response types and functional effect types were ultimately selected as the key species for vegetation restoration. Based on the above results, we offer an ecological basis for choosing the appropriate species based on functional traits, which may be very helpful for practitioners involved in ecological restoration and management.

1. Introduction

Soil and water conservation is one of the most important ecological functions and services. Because of their influence on soil erosion, ecohydrology, and water quality, changes in land use or management have imposed great pressure on watershed ecological restoration and management [1,2]. The most efficient method to improve soil and water conservation abilities is thought to be the effective restoration of soil and water conservation forests [3,4]. However, current restoration strategies are mainly focused on monospecific vegetation restoration, which leads to poor soil and water conservation efficiency [5,6]. Therefore, it is necessary to understand how to select specific multiple species to maximize the soil and water conservation capacity of restored vegetation.
Trait-based approaches are increasingly used to explore the responses to environmental changes and ecological effects on ecosystem processes and functions [7,8]. Recent research has shown that ecohydrological processes and functions mainly depend on the functional traits of living plants [9,10,11,12]. Plant traits not only relate to plant growth and persistence (e.g., resource acquisition and use, recruitment, and dispersal), which are response traits, but also determine ecosystem processes and functions—the effect traits [7,8,13,14,15,16]. Based on the plants’ response and effect traits, plant species can be classified into different plant functional types (PFTs), namely, plant functional response types (PFreTs) and plant functional effect types (PFefTs). This provides an effective way to select suitable species that can not only cope with specific environmental conditions, but also improve ecosystem functions.
The differentiation between PFreTs and PFefTs has been suggested in the literature [17,18]. It is assumed that PFreT is a group of plants with similar responses to a given environmental factor and that PFefT is a group of plants with a similar effect on certain ecosystem variables [8]. If PFreTs and PFefTs are similar or closely correlated, the effects of environmental change on the community functional structure may potentially spread to the ecosystem functions. Conversely, if PFreTs and PFefTs are distinct, communities may be able to withstand the effects of environmental changes while still maintaining ecosystem functions, despite changes in community functional structure. Lavorel and Garnier demonstrated that traits related to nutrient gradients and those affecting ecosystem functions overlapped highly [8], whereas Poorter and De Jong discovered that traits associated with response to fire and those affecting flammability had little overlap [19]. Therefore, the degree of overlap and correlation between PFreTs and PFefTs appears to be useful for identifying key restoration species and exploring the relationships between the response of community to environmental disturbance and the effect on ecological functions [15]. However, there are little empirical data to support the presence of these relationships using plant functional traits.
The Central Yunnan Plateau is a crucial region for soil and water conservation in the Yangtze River Basin. Previous research has shown that plant attributes (e.g., height, growth type, and specific leaf area) are close to ecohydrological functions [9], which suggests that these attributes could be used as functional effect traits. In addition, many studies have found that some functional traits, e.g., specific leaf area, leaf nitrogen concentration, leaf dry matter content, and plant height, can be selected as functional response traits to soil resources under different soil and water loss conditions [7,8,10,11,15,16]. Here, we firstly investigated the distribution pattern of functional traits and the dynamics of soil resources and the soil and water conservation capacity. Then, an optimization algorithm was then performed to identify the PFreF to site resources and PFefF in relation to the soil and water conservation capacity for the common species of the Central Yunnan Plateau. The main aims in this context are (i) to compare the differences in plant traits, soil properties, and ecohydrological functions across different vegetation restoration types; (ii) to examine the relationships between functional traits and environmental factors and ecohydrological functions; and (iii) to identify functional traits for choosing species of PFreTs and PFefTs for revegetation of soil erosion area and control of water and soil loss.

2. Materials and Methods

2.1. Study Area

Field work was done in Mouding County (25°24′09′′ N; 101°28′18′′ E), which is about 200 km west of Kunming, Yunnan Province, China. The region has a warm temperate zone (Köppen–Geiger climate classification), with an average annual rainfall of 846 mm. The rainy season runs from May to October. The soil of the area is Cambisols (FAO/UNESCO classifications). A subtropical evergreen broad-leaved forest served as the area’s primary vegetation, but it has now been nearly entirely destroyed. Since the 1980s, some of the area has been replanted with fast-growing Pinus yunnanensis after deforestation. Other remnant coppices and pastures were abandoned and formed different secondary stands. This area currently includes secondary shrubland (SL), Pinus yunnanensis coniferous forest (CF), mixed needle–broad-leaved forest (MF), and natural secondary forest (NSF). These four main vegetation restoration types were selected to investigate the species traits, soil properties, and ecohydrological functions.

2.2. Investigation and Monitoring Procedures

Five non-contiguous duplicate plots were randomly assigned for each plant community type. All 20 plots had similar climatic conditions, soil types, and slope gradients. All of the woody species (height > 30 cm) were identified and counted. The species relative abundance was calculated based on the diameters at the breast height or basal area.
Seven representative plant functional traits were evaluated for the identification of the plant functional types, which are related to the plant structure, nutrients, and growth. The functional traits include the specific root length (SRL), leaf area (LA), leaf nitrogen concentration (LNC), leaf dry matter content (LDMC), specific leaf area (SLA), tree height (H), and plant growth type (GT). LNC, SLA, SRL, and LDMC were selected as the response traits relative to water and nutrients [20], and GT, H, LA, SLA, and SRL were used as the effect traits relative to water and soil conservation [9,10,11]. The traits of 27 common species were measured following standardized protocols [20]. Moreover, five random soil samples (between 0 and 30 cm depth) were collected in each plot. They were analyzed for the soil organic carbon (SOC), total nitrogen (TN), total phosphorus (TP), and pH. Three another undisturbed soil samples were also collected to measure the soil bulk density (BD) and soil water content (SWC) [21].
Three random plots from among the five plots were chosen to monitor the ecohydrological processes and functions. Two automatic rain gauges and two normal rain gauges were placed in an open area of the experimental station to monitor precipitation. Moreover, plastic collectors were put in place under the canopy of 10 sample trees to catch the throughfall. Because of the extremely low percentage of stemflow, we combined canopy interception and stemflow in this study and used the following formula: In = P − Tf, where In is the sum of canopy interception (Ic) and stemflow (Sf), and P and Tf represent precipitation and throughfall, respectively. The difference between the mass of dry material and wet material was used to calculate the maximal water-retaining capacity of litter (MWClitter). The formula used to determine the soil maximum water-retaining capacity (MWCsoil): MWCsoil = 10,000 Pt h, where Pt is total porosity of soil and h is soil depth. We installed an automatic flow gauge to measure the amount of soil surface runoff along the lower edge of each plot. After each runoff occurrence, 500 mL of soil surface runoff was sampled and the soil erosion was measured by drying three replicates of 50 mL runoff at 105 °C. To create a new average volume, the soil surface runoff and soil erosion data from the previous four years were averaged.

2.3. Statistical Analysis

As the plant community’s functional diversity index, the mean species trait values and the species relative abundance were used to compute the CWMs for each trait and plot as follows [22,23]: C W M i p = i = 1 S a i p × t i , where aip represents the relative abundance of species i in plot p, ti represents the mean trait value of species i. Soil physicochemical properties, CWMs, and water and soil conservation parameters under different vegetation types were compared using one-way analysis of variance (ANOVA) and the Fisher’s least significant difference (LSD) test. In addition, we analyzed the correlations between the plant traits and soil properties and water and soil conservation parameters using Spearman’s correlation.
PFTs were defined using the optimization algorithm and were implemented with SYNCSA software [24]. The algorithm used polythetic cluster analysis to define the PFTs and then looked for the most pertinent features in a recursive process. The degree of convergence between community variation and environmental factors served as the foundation for the optimization procedure. We employed the matrix correlation ρ(D;Δ) to quantify this. D is a dissimilarity matrix of plots computed from matrix X of PFTs by plots. Δ is a dissimilarity matrix of the same plots based on soil environmental data. ρ is defined as Pearson’s product-moment correlation. Larger ρ values suggest that the PFTs are more likely to be “functional” for the environmental factors considered [25]. Matrix E (matrix environment) includes two matrices: the soil resource matrix and the soil and water conservation matrix. In addition, we used a redundancy analysis to examine the relationships between PFefTs and PFreTs across all of the communities. The performances of PFefTs and PFreTs in each quadrat were taken as explanatory variables and response variables, respectively. Moreover, the overlapping species between PFefTs and PFreTs were identified as the key restoration species for the construction of soil and water conservation forests.

3. Results

3.1. Plant Traits, Soil Properties, and Ecohydrological Functions

Different functional traits showed trait-specific responses to the community restoration types. SL and CF had a higher CWM for SLA, LNC, and SRL. MF and NSF had a higher CWM for LDMC, LA, and H (Table 1). For the soil physicochemical properties, SWC and SOC were higher in NSF and MF than in SL and CF. The soil in NSF had significantly higher TN and TP than in the other plant communities (Table 1). Moreover, significantly higher interception of canopy and stemflow, and considerably lower soil erosion and soil surface runoff were found in NSF. However, the maximum water-holding capacity of soil displayed a non-significant difference among the four plant communities (Table 1).
Spearman’s correlation between the plant functional traits and soil basic properties and ecosystem function indices are shown in Table 2. The results display that the CWM of all traits except LNC was significantly linked to the soil properties (SWC, BD, and SOC) and In. Variations in the CWMs for SLA and SRL were significantly associated with soil TP, soil surface runoff, and soil erosion. Moreover, there were close negative relationships between soil erosion and CWMs for LA and H (Table 2).

3.2. Plant Functional Response Types (PFreTs) Related to Soil Resources

Based on the four selected traits and with a maximum congruence between species traits and soil variation (ρ = 0.18), a subgroup of two traits (SLA and LNC) defined two plant functional response types (PFreTs) (Table 3). Species with a higher LNC and lower SLA were grouped into PFreTs, such as Lithocarpus polystachya, Eurya nitida, Osteomeles schwerinae, and Eucalyptus smithii. Grouped in PFreT-2 were those species with a lower SLA and LNC. The most representative species were Keteleeria evelyniana, Ternstroemia gymnanthera, Pyrus pashia, and Myrsine africana. The presence of these two PFreTs was 100%, but the average performance of PFreT-1 was two times greater than that of PFreT-2.

3.3. Plant Functional Effect Types (PFefTs) Related to Water and Soil Conservation

Seven plant functional effect types (PFefTs) defined by three optimal traits (SLA, LA, and SRL) were found with a large congruence ρ(D, Δ) of 0.40. Grouped in PFefT-1 were those species with a higher SLA and SRL, despite the lowest LA. The most representative species was Keteleeria evelyniana. Grouped in PFefT-2 were species with a lower SLA, SRL, and LA, such as Cyclobalanopsis glaucoides and Pinus yunnanensis. Plant type PFefT-3 included those species with the lowest SLA and LS and the lowest SRL (e.g., Pyrus pashia and Myrica nana). PFefT-4 was the species with the highest SRL and the lowest LS, similar to Myrsine africana. The first four PFefTs had higher presence values, and the average performance of PFefT-2 (Avg. Perf. = 15.5) was the highest among the seven functional types (Table 4).

3.4. Evaluating the Relationships between PFreTs and PFefTs

The relationship between the community composition given by PFefTs associated with ecological functions given by PFreTs associated with nutrient loss was further evaluated by redundancy analysis (Table 5). The results showed that the sum of all canonical eigenvalues (PFefTs) only explained 21.6% of the variation in the response matrix (PFreTs). Meanwhile, the values of all canonical eigenvalues were smaller than the first non-canonical eigenvalues (Table 5). These results indicate that community functional effects on soil and water conservation could not explain the overall changes in community response after soil nutrient loss.

3.5. Identification of Key Restoration Species

On the basis of the identification of plant functional types, we found eight overlapping species, including three tree species (Cyclobalanopsis glaucoides, Lithocarpus dealbatus, and Keteleeria evelyniana) and five shrub species (Camellia forrestii, Ternstroemia gymnanthera, Pyrus pashia, Myrsine nana, and Rosa longicuspis) (Figure 1). These overlapping species could be used as the key species for vegetation restoration to adapt to the site soil conditions and maintain local water and soil conservation capacity.

4. Discussion

4.1. Selection of Plant Functional Traits

Our results have shown that SLA is the better trait for optimally defining PFefTs and PFreTs. Functional traits optimally defining PFefTs were SLA, SRL, and LA. SLA and LA had significant effects on the water holding capacity of leaves and the rainfall interception capacity of forest canopies [9], and SRL improved ecohydrological functions by altering the maximum water-retaining capacity of soil [9,26]. In the identification of PFreTs, SLA and LNC were the better traits for optimally defining PFreTs. It has been confirmed that SLA and LNC are better response traits in many studies [15,19,27,28]. In addition, the maximum congruence ρ(D, Δ) of 0.18 was not high, and only two types were defined in the identification of PFreTs, which suggests that representative data on LNC, SLA, SRL, and LDMC are not sufficient for the identification of PFreTs and that more response traits should be selected for defining PFreTs.

4.2. Identification of Plant Functional Effects and Response Types

Seven plant functional effect types (PFefTs) defined by three optimal traits (SLA, LA, and SRL) were found with a maximum congruence. The results showed that the first three PFefTs had lower leaf areas, which was not consistent with the fact that the larger the leaf area was, the higher the rainfall interception of the leaf and canopy and the lower the water and soil loss. These results may suggest that leaf area was not the main factor controlling soil and water loss. Canopy, litter layer, and root-bearing soil were found to have important roles in water and soil conservation. SLA was an effective indicator of rainfall interception by the canopy. At the same time, SLA was also an indicator of litter decomposition. Leaves with higher SLA always had faster decomposition rates, resulting in lower litter mass accumulation and soil and water conservation capacities. Species with higher SRL would be important for increasing the maximum water-retaining capacity of soil and reducing the soil surface runoff and soil erosion by root nets [10]. However, the reason for two PFefTs in the first three PFefTs with medium SLA and SRL may be explained by the patterns of trade-off between the growth rate and cumulative biomass because plants with a higher SLA and SRL always have a higher growth rate, but have lower cumulative biomass. Grouped in PFefT-3 were the understory shrub species with the lowest SLA and lower SRL. Shrub species affected rainfall interception and soil erosion by the shrub canopy layer and surface root-bearing soil.
In the identification of plant PFreTs, the two PFreTs had lower SLAs, suggesting that the species with lower SLAs may be better in sites with poor nutrients due to severe soil and nutrient loss. The difference in LNC between the two PFreTs showed that different strategies were adopted. PFreT-1, with a higher LNC, exhibited an “extravagant nutrient use strategy” in relatively rich soil nutrient conditions, while PFreT-2 had the opposite strategy (“conservative nutrient use strategy”), such as a lower LNC and high N resorption efficiency from senescing leaves [9,20].

4.3. Implications of Plant Functional Types for the Construction of Soil and Water Conservation Forests

Achieving efficient soil and water conservation in the Central Yunnan Plateau is the key concern for forest managers and ecologists [4,29]. Maintaining the local species pool by active planting is frequently the first step in restoration practices. The stressful soil, water, and nutrient conditions in Central Yunnan, however, pose a serious threat to the effectiveness of community restoration [5]. Thus, soil surface runoff and soil erosion must be successfully reduced in the restored sites [30]. Our study proposes choosing mid-successional species for restoration efforts, particularly large shrubs and trees, to resolve these two seemingly incompatible properties. This method is derived from the trade-offs between plant responses to stressful environmental conditions and the plant effects on ecosystem functions [15,16,17]. In the early stages of succession, although fast-growing species with high SLA, LNC, and SRL but low LDMC could hasten nutrient turnover time through a high litter decomposition rate, the resulting reductions in accumulated standing biomass, litter biomass, and fine root biomass did not successfully control soil surface runoff and soil erosion. On the contrary, slow-growing species in later phases of succession could retain specific ecohydrological processes and functions through high LAI, litter biomass, and fine root biomass, but they were unable to properly adapt to challenging environmental conditions (e.g., higher light, lower soil water content, and poor soil nutrient). Therefore, we believe that it may be preferable to introduce mid-successional species for vegetation restoration in Central Yunnan rather than late- or early-successional species. Firstly, the utilization of mid-successional species, the majority of which are drought- and infertility-tolerant forms with regeneration niches typically associated with open environments [31], could help to boost restoration success. Secondly, they tend to have higher SRL and deeper roots at the seedling stage, which is crucial for the establishment of earlier erosion protection [32]. Finally, they naturally quicken succession toward a mature community by facilitating the recruitment of species that are vulnerable to drought under their canopies.
We used the response-and-effect trait framework to assess the overlap between PFreTs and PFefTs and to identify key species in the subtropic mountain ecosystem. However, the limitations of this method should be considered by forest managers and ecologists. For example, interspecific relationships among the selected species were not considered in this method, considering that interspecific competition may affect the community functional structure or ecosystem functions. Further research into traits and interspecific relationships and tradeoffs would improve the accuracy of this method. Nevertheless, this research suggests that a trait-based method may help guide forest restoration and management to maintain ecosystem services.

5. Conclusions

In the present study, we demonstrated that plant functional traits can be used to construct a response-and-effect framework for determining how species in changing environments will influence ecosystem functions. Our results showed that different functional traits displayed trait-specific responses to community restoration types. Analyses of the correlations and optimization algorithm suggested that SLA was the key response and effect trait, and it could not only effectively respond to soil resources, but it also strongly affected soil ecohydrological functions. Based on three optimal effect traits (SLA, LS, and SRL) and two response traits (SLA and LNC), seven functional effect types in relation to soil and water conservation capacity (interception of canopy and stemflow, maximum water-holding capacity of litter, maximum water-holding capacity of soil, soil surface runoff, and soil erosion) and two plant functional response types to soil physicochemical properties were identified. Moreover, eight overlapping species between plant functional response types and functional effect types were selected as the key restoration species. These results provide a methodological guide for species selection for recovery, as well as a species inventory for the restoration of degraded ecosystems in this region.

Author Contributions

Conceptualization, D.F. and X.W.; methodology, D.F. and X.W.; validation, All authors; formal analysis, L.H. and X.M.; investigation, L.H., X.M., C.S., H.S., G.H. and Y.H.; data curation, D.F. and X.W.; writing—original draft preparation, X.W.; writing—review and editing, C.D. and D.F.; visualization, All authors; supervision, D.F.; project administration, X.W.; funding acquisition, D.F. and X.W. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the National Natural Science Foundation of China (42267051, U2002208), Yunnan Fundamental Research Projects (202301AS070038), the Special Basic Cooperative Programs of Yunnan Provincial Undergraduate Universities’ Association (202101BA070001-154), and Undergraduate Training Program on Innovation and Entrepreneurship (S202211393056).

Institutional Review Board Statement

Not Applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Borrelli, P.; Robinson, D.A.; Panagos, P.; Lugato, E.; Yang, J.E.; Alewell, C.; Wuepper, D.; Montanarella, L.; Ballabio, C. Land Use and Climate Change Impacts on Global Soil Erosion by Water (2015–2070). Proc. Natl. Acad. Sci. USA 2020, 117, 21994–22001. [Google Scholar] [CrossRef] [PubMed]
  2. Nobre, R.L.G.; Caliman, A.; Cabral, C.R.; de Carvalho Araújo, F.; Guerin, J.; Dantas, F.d.C.C.; Quesado, L.B.; Venticinque, E.M.; Guariento, R.D.; Amado, A.M. Precipitation, Landscape Properties and Land Use Interactively Affect Water Quality of Tropical Freshwaters. Sci. Total Environ. 2020, 716, 137044. [Google Scholar] [CrossRef] [PubMed]
  3. Cerdà, A.; Lucas-Borja, M.E.; Franchn-Pardo, I.; Úbeda, X.; Novara, A.; López-Vicente, M.; Popović, Z.; Pulido, M. The Role of Plant Species on Runoff and Soil Erosion in a Mediterranean Shrubland. Sci. Total Environ. 2021, 799, 149218. [Google Scholar] [CrossRef]
  4. Fu, D.; Wu, X.; Duan, C.; Chadwick, D.R.; Jones, D.L. Response of Soil Phosphorus Fractions and Fluxes to Different Vegetation Restoration Types in a Subtropical Mountain Ecosystem. Catena 2020, 193, 104663. [Google Scholar] [CrossRef]
  5. Tang, C.Q.; Hou, X.; Gao, K.; Xia, T.; Duan, C.; Fu, D. Man-Made versus Natural Forests in Mid-Yunnan, Southwestern China. Mt. Res. Dev. 2007, 27, 242–249. [Google Scholar] [CrossRef]
  6. Cao, S.; Chen, L.; Yu, X. Impact of China’s Grain for Green Project on the Landscape of Vulnerable Arid and Semi-arid Agricultural Regions: A Case Study in Northern Shaanxi Province. J. Appl. Ecol. 2009, 46, 536–543. [Google Scholar] [CrossRef]
  7. Garnier, E.; Navas, M.-L. A Trait-Based Approach to Comparative Functional Plant Ecology: Concepts, Methods and Applications for Agroecology. A Review. Agron. Sustain. Dev. 2012, 32, 365–399. [Google Scholar] [CrossRef]
  8. Lavorel, S.; Garnier, É. Predicting Changes in Community Composition and Ecosystem Functioning from Plant Traits: Revisiting the Holy Grail. Funct. Ecol. 2002, 16, 545–556. [Google Scholar] [CrossRef]
  9. Fu, D.; Duan, C.; Hou, X.; Xia, T.; Gao, K. Patterns and Relationships of Plant Traits, Community Structural Attributes, and Eco-Hydrological Functions during a Subtropical Secondary Succession in Central Yunnan (Southwest China). Arch. Biol. Sci. 2009, 61, 741–749. [Google Scholar] [CrossRef]
  10. Zhu, H.; Fu, B.; Wang, S.; Zhu, L.; Zhang, L.; Jiao, L.; Wang, C. Reducing Soil Erosion by Improving Community Functional Diversity in Semi-arid Grasslands. J. Appl. Ecol. 2015, 52, 1063–1072. [Google Scholar] [CrossRef]
  11. Kervroëdan, L.; Armand, R.; Saunier, M.; Ouvry, J.-F.; Faucon, M.-P. Plant Functional Trait Effects on Runoff to Design Herbaceous Hedges for Soil Erosion Control. Ecol. Eng. 2018, 118, 143–151. [Google Scholar] [CrossRef]
  12. McGill, B.J.; Enquist, B.J.; Weiher, E.; Westoby, M. Rebuilding Community Ecology from Functional Traits. Trends Ecol. Evol. 2006, 21, 178–185. [Google Scholar] [CrossRef] [PubMed]
  13. Faucon, M.P.; Houben, D.; Lambers, H. Plant Functional Traits: Soil and Ecosystem Services. Trends Plant Sci. 2017, 22, 385–394. [Google Scholar] [CrossRef] [PubMed]
  14. Wood, S.A.; Karp, D.S.; DeClerck, F.; Kremen, C.; Naeem, S.; Palm, C.A. Functional Traits in Agriculture: Agrobiodiversity and Ecosystem Services. Trends Ecol. Evol. 2015, 30, 531–539. [Google Scholar] [CrossRef]
  15. Klumpp, K.; SOUSSANA, J. Using Functional Traits to Predict Grassland Ecosystem Change: A Mathematical Test of the Response-and-effect Trait Approach. Glob. Chang. Biol. 2009, 15, 2921–2934. [Google Scholar] [CrossRef]
  16. Funk, J.L.; Larson, J.E.; Ames, G.M.; Butterfield, B.J.; Cavender-Bares, J.; Firn, J.; Laughlin, D.C.; Sutton-Grier, A.E.; Williams, L.; Wright, J. Revisiting the H Oly G Rail: Using Plant Functional Traits to Understand Ecological Processes. Biol. Rev. 2017, 92, 1156–1173. [Google Scholar] [CrossRef]
  17. Blanco, C.C.; Sosinski, E.E.; Dos Santos, B.R.C.; da Silva, M.A.; Pillar, V.D. On the Overlap between Effect and Response Plant Functional Types Linked to Grazing. Community Ecol. 2007, 8, 57–65. [Google Scholar] [CrossRef]
  18. Louault, F.; Pillar, V.D.; Aufrere, J.; Garnier, E.; Soussana, J. Plant Traits and Functional Types in Response to Reduced Disturbance in a Semi-natural Grassland. J. Veg. Sci. 2005, 16, 151–160. [Google Scholar] [CrossRef]
  19. Poorter, H.; De Jong, R.O.B. A Comparison of Specific Leaf Area, Chemical Composition and Leaf Construction Costs of Field Plants from 15 Habitats Differing in Productivity. New Phytol. 1999, 143, 163–176. [Google Scholar] [CrossRef]
  20. Cornelissen, J.H.C.; Lavorel, S.; Garnier, E.; Díaz, S.; Buchmann, N.; Gurvich, D.E.; Reich, P.B.; ter Steege, H.; Morgan, H.D.; van der Heijden, M.G.A.; et al. A Handbook of Protocols for Standardised and Easy Measurement of Plant Functional Traits Worldwide. Aust. J. Bot. 2003, 51, 335–380. [Google Scholar] [CrossRef]
  21. Gregorich, E.G.; Carter, M.R. Soil Sampling and Methods of Analysis; CRC Press: Boca Raton, FL, USA, 2007. [Google Scholar]
  22. Garnier, E.; Cortez, J.; Billès, G.; Navas, M.-L.; Roumet, C.; Debussche, M.; Laurent, G.; Blanchard, A.; Aubry, D.; Bellmann, A.; et al. Plant Functional Markers Capture Ecosystem Properties during Secondary Succession. Ecology 2004, 85, 2630–2637. [Google Scholar] [CrossRef]
  23. Casanoves, F.; Pla, L.; Di Rienzo, J.A.; Díaz, S. FDiversity: A Software Package for the Integrated Analysis of Functional Diversity. Methods Ecol. Evol. 2011, 2, 233–237. [Google Scholar] [CrossRef]
  24. Pillar, V.D. SYNCSA Software for Character-Based Community Analysis; v. 2.2.4; UFRGS: Porto Alegre, Brazil, 2004. [Google Scholar]
  25. Pillar, V.D. On the Identification of Optimal Plant Functional Types. J. Veg. Sci. 1999, 10, 631–640. [Google Scholar] [CrossRef]
  26. Baronti, S.; Magno, R.; Maienza, A.; Montagnoli, A.; Ungaro, F.; Vaccari, F.P. Long Term Effect of Biochar on Soil Plant Water Relation and Fine Roots: Results after 10 Years of Vineyard Experiment. Sci. Total Environ. 2022, 851, 158225. [Google Scholar] [CrossRef] [PubMed]
  27. Oktavia, D.; Jin, G. Variations in Leaf Morphological and Chemical Traits in Response to Life Stages, Plant Functional Types, and Habitat Types in an Old-Growth Temperate Forest. Basic Appl. Ecol. 2020, 49, 22–33. [Google Scholar] [CrossRef]
  28. Jung, V.; Albert, C.H.; Violle, C.; Kunstler, G.; Loucougaray, G.; Spiegelberger, T. Intraspecific Trait Variability Mediates the Response of Subalpine Grassland Communities to Extreme Drought Events. J. Ecol. 2014, 102, 45–53. [Google Scholar] [CrossRef]
  29. Fu, D.; Wu, X.; Duan, C.; Smith, A.R.; Jones, D.L. Traits of Dominant Species and Soil Properties Co-Regulate Soil Microbial Communities across Land Restoration Types in a Subtropical Plateau Region of Southwest China. Ecol. Eng. 2020, 153, 105897. [Google Scholar] [CrossRef]
  30. Fu, D.; Wu, X.; Duan, C.; Guan, Q.; Huang, N. Changes in Functional Structure Characteristics Mediate Ecosystem Functions during Human-Induced Land-Cover Alteration: A Case Study in Southwest China. J. Soil Water Conserv. 2018, 73, 461–468. [Google Scholar] [CrossRef]
  31. Padilla, F.M.; Pugnaire, F.I. Rooting Depth and Soil Moisture Control Mediterranean Woody Seedling Survival during Drought. Funct. Ecol. 2007, 21, 489–495. [Google Scholar] [CrossRef]
  32. Padilla, F.M.; Ortega, R.; Sánchez, J.; Pugnaire, F.I. Rethinking Species Selection for Restoration of Arid Shrublands. Basic Appl. Ecol. 2009, 10, 640–647. [Google Scholar] [CrossRef]
Figure 1. Species pools of PFreTs and PFefTs and the identification of key restoration species using a trait-based response-and-effect framework.
Figure 1. Species pools of PFreTs and PFefTs and the identification of key restoration species using a trait-based response-and-effect framework.
Biology 12 00618 g001
Table 1. Plant traits, soil physicochemical properties, and water and soil conservation capacity in four land restoration types.
Table 1. Plant traits, soil physicochemical properties, and water and soil conservation capacity in four land restoration types.
ShrublandConiferous ForestMixed ForestNatural Secondary Forest
SLA13.25 ± 0.24 b17.47 ± 0.58 a11.32 ± 0.61 c9.71 ± 0.06 d
LDMC285.7 ± 3.7 c322.4 ± 7.3 b395.8 ± 13.6 a406.8 ± 11.9 a
LNC14.02 ± 0.18 a8.90 ± 0.17 b8.74 ± 0.14 b9.22 ± 0.10 b
SRL38.90 ± 0.69 b44.02 ± 1.12 a29.26 ± 1.35 c18.91 ± 0.72 d
LA7.65 ± 0.15 c5.48 ± 0.33 d10.83 ± 1.70 b15.38 ± 1.05 a
H0.89 ± 0.03 d5.55 ± 0.14 c6.84 ± 0.46 b8.88 ± 0.52 a
pH4.15 ± 0.14 a4.08 ± 0.04 a4.26 ± 0.01 a4.19 ± 0.11 a
BD (g/cm3)1.12 ± 0.03 b1.28 ± 0.04 a1.02 ± 0.04 c0.99 ± 0.06 c
SWC (%)26.34 ± 0.48 b29.07 ± 1.59 b31.98 ± 2.37 ab37.11 ± 2.60 a
SOC (mg/g)28.42 ± 1.41 b26.02 ± 1.78 b38.62 ± 3.38 ab45.11 ± 7.70 a
TN (mg/g)0.48 ± 0.05 b0.44 ± 0.05 b0.47 ± 0.05 b0.69 ± 0.06 a
TP (mg/g)0.25 ± 0.00 b0.23 ± 0.01 b0.22 ± 0.02 b0.34 ± 0.05 a
In (mm)-37.65 ± 3.14 b46.84 ± 4.95 a53.91 ± 3.26 a
MWClitter (t/hm2)1.79 ± 0.10 b7.28 ± 0.74 a7.66 ± 0.49 a9.01 ± 1.41 a
MWCsoil (t/hm2)4137 ± 169 a4080 ± 48 a4490 ± 170 a4133 ± 70 a
Soil surface runoff (m3/hm2·a)57.26 ± 28.06 b363.18 ± 155.55 a63.16 ± 61.60 b2.70 ± 1.33 c
Soil erosion (t/hm2·a)14.04 ± 7.99 b61.47 ± 26.05 a10.11 ± 9.84 b0.26 ± 0.17 c
Values are M ± SE. Different letters represent significant differences between the restoration community types by LSD test (p < 0.05).
Table 2. Spearman correlations between plant traits and soil basic physicochemical properties and ecosystem function parameters.
Table 2. Spearman correlations between plant traits and soil basic physicochemical properties and ecosystem function parameters.
LDMCSLALAHLNCSRL
pH0.420−0.4550.3500.322−0.238−0.448
SWC0.881 **−0.622 *0.4830.769 **−0.350−0.615 *
BD−0.706 *0.895 **−0.678 *−0.720 **0.2380.860 **
SOC0.692 *−0.804 **0.671 *0.622 *−0.077−0.797 **
TN0.175−0.5590.4200.3080.287−0.545
TP0.182−0.594 *0.5380.2310.406−0.573 *
In 0.700 *−0.717 *0.700 *0.767 *−0.083−0.733 *
MWClitter 0.720 **−0.3920.2100.650 *−0.517−0.357
MWCsoil 0.126−0.1820.0140.084−0.196−0.210
Soil surface runoff−0.4690.720 **−0.538−0.5310.2310.692 *
Soil erosion−0.5590.783 **−0.608 *−0.587 *0.2520.755 **
* and ** represent the significant correlation at 0.05 and 0.01 levels.
Table 3. Plant functional traits and the identification of two plant functional response types (PFreTs).
Table 3. Plant functional traits and the identification of two plant functional response types (PFreTs).
PFefTNumber
of Species
Functional TraitsPresence
(%)
Average PerformanceRepresentative Species
SLALNC
1202310026.5Lithocarpus polystachya, Eurya nitida,
Osteomeles schwerinae, Eucalyptus smithii
2172210013Keteleeria evelyniana, Pyrus pashia,
Ternstroemia gymnanthera, Myrsine africana
SLA, specific leaf area, 1 = 0–7 m2/kg, 2 = 7–14 m2/kg, 3 = 14–22 m2/kg, 4 = >22 m2/kg; LNC, leaf nitrogen concentration, 1 = 0–10 mg/g, 2 = 10–15 mg/g, 3 = 15–20 mg/g, 4 = >20 mg/g.
Table 4. Plant traits and the identification of plant functional effect types (PFefTs).
Table 4. Plant traits and the identification of plant functional effect types (PFefTs).
PFefTNumber
of Species
Functional TraitsPresence
(%)
Average PerformanceRepresentative Species
SLALSSRL
193131008.3Keteleeria evelyniana, Lithocarpus polystachya
21122210015.5Cyclobalanopsis glaucoides, Pinus yunnanensis
351121006.8Pyrus pashia, Myrica nana
4521493.37Myrsine africana
5225333.33.4Dichotomanthus tristaniaecarpa
611346.73Lithocarpus dealbatus
71352208Eucalyptus smithii
SLA, specific leaf area, 1 = 0–7 m2/kg, 2 = 7–14 m2/kg, 3 = 14–22 m2/kg, 4 = >22 m2/kg; LS, leaf size, 1 = 0–10 cm2, 2 = 10–20 cm2, 3 = 20–30 cm2, 4 = 30–40 cm2, 5 = >40 cm2; SRL, specific root length, 1 = 0–15 m2/g, 2 = 15–30 m2/g, 3 = 30–45 m2/g, 4 = >45 m2/g.
Table 5. Redundancy analysis evaluating the relationships between PFreTs and PFefTs.
Table 5. Redundancy analysis evaluating the relationships between PFreTs and PFefTs.
Canonical AxesNon-Canonical Axes
IIIIIIIVIIIIIIIV
0.1530.0600.0030.0010.3080.2790.2430.170
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Fu, D.; Wu, X.; Hu, L.; Ma, X.; Shen, C.; Shang, H.; Huang, G.; He, Y.; Duan, C. Plant Traits Guide Species Selection in Vegetation Restoration for Soil and Water Conservation. Biology 2023, 12, 618. https://doi.org/10.3390/biology12040618

AMA Style

Fu D, Wu X, Hu L, Ma X, Shen C, Shang H, Huang G, He Y, Duan C. Plant Traits Guide Species Selection in Vegetation Restoration for Soil and Water Conservation. Biology. 2023; 12(4):618. https://doi.org/10.3390/biology12040618

Chicago/Turabian Style

Fu, Denggao, Xiaoni Wu, Lianyu Hu, Xudong Ma, Chunjie Shen, Huaye Shang, Gongning Huang, Yongjian He, and Changqun Duan. 2023. "Plant Traits Guide Species Selection in Vegetation Restoration for Soil and Water Conservation" Biology 12, no. 4: 618. https://doi.org/10.3390/biology12040618

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop