Next Issue
Volume 9, August
Previous Issue
Volume 9, June
 
 

Nanomaterials, Volume 9, Issue 7 (July 2019) – 145 articles

Cover Story (view full-size image): Nanoparticles were synthesized for the first time from pea protein isolates using ethanol desolvation followed by high-pressure homogenization. Size of the pea protein nanoparticles (PPN) was tailored by controlling the pH, changing the ethanol to water ratio, and pre-heating the dispersion before desolvation. PPN showed smaller size and higher surface charge at pH 10 than at pH 3. Pre-heating the protein solutions also increased surface charge of the PPN compared to that fabricated at room temperature. Desolvation led to a roughly spherical shape and extensive aggregation of PPN. A change in protein secondary structure, such as decrease in β-sheet, and an increase in α-helix and random coil, was also recorded. View this paper.
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
11 pages, 3664 KiB  
Article
The Effect of Hybridized Carbon Nanotubes, Silica Nanoparticles, and Core-Shell Rubber on Tensile, Fracture Mechanics and Electrical Properties of Epoxy Nanocomposites
by Ankur Bajpai and Stéphane Carlotti
Nanomaterials 2019, 9(7), 1057; https://doi.org/10.3390/nano9071057 - 23 Jul 2019
Cited by 23 | Viewed by 4408
Abstract
The paper investigates the effect of adding a combination of rigid nanoparticles and core-shell rubber nanoparticles on the tensile, fracture mechanics, electrical and thermo-mechanical properties of epoxy resins. SiO2 nanoparticles, multi-walled carbon nanotubes (MWCNT’s), as rigid nanofillers, and core-shell rubber (CSR) nanoparticles, [...] Read more.
The paper investigates the effect of adding a combination of rigid nanoparticles and core-shell rubber nanoparticles on the tensile, fracture mechanics, electrical and thermo-mechanical properties of epoxy resins. SiO2 nanoparticles, multi-walled carbon nanotubes (MWCNT’s), as rigid nanofillers, and core-shell rubber (CSR) nanoparticles, as soft nanofillers were used with bisphenol-A-based epoxy resin. Further, the rigid fillers were added systematically with core-shell rubber nanoparticles to investigate the commingled effect of rigid nanofillers and soft CSR nanoparticles. The resulting matrix will be broadly evaluated by standard methods to quantify tensile, fracture mechanics, electrical, and thermal properties. The results show that the electrical conductivity threshold is obtained at 0.075 wt. % for MWCNT-modified systems. For hybrid systems, the maximum increase of fracture toughness (218%) and fracture energy (900%) was obtained for a system containing 5 wt. % of CSR and 10 wt. % of SiO2. The analysis of the fracture surfaces revealed the information about existing toughening micro-mechanisms in the nanocomposites. Full article
(This article belongs to the Special Issue Advanced Materials for Aerospace: Polymer Nanocomposites)
Show Figures

Figure 1

8 pages, 2112 KiB  
Article
Electrochemistry Studies of Hydrothermally Grown ZnO on 3D-Printed Graphene
by Dimitra Vernardou and George Kenanakis
Nanomaterials 2019, 9(7), 1056; https://doi.org/10.3390/nano9071056 - 23 Jul 2019
Cited by 14 | Viewed by 3106
Abstract
A three-dimensional (3D) printer was utilised for the three-dimensional production of graphene-based pyramids and an efficient hydrothermal procedure for ZnO growth. In particular, the 3D-printed graphene pyramids were forwarded in Pyrex glass bottles with autoclavable screw caps filled with 50 mL of an [...] Read more.
A three-dimensional (3D) printer was utilised for the three-dimensional production of graphene-based pyramids and an efficient hydrothermal procedure for ZnO growth. In particular, the 3D-printed graphene pyramids were forwarded in Pyrex glass bottles with autoclavable screw caps filled with 50 mL of an aqueous solution of zinc nitrate hexahydrate and hexamethylenetetramine for 1 h at 95 °C; sufficient enough time to deposit well-dispersed nanoparticles. X-ray diffraction patterns were in accordance with a Raman analysis and presented the characteristic peaks of graphite along with those of wurtzite ZnO. Different positions on the sample were tested, confirming the uniform dispersion of ZnO on graphene pyramids. From the electrochemical studies, it was found that the charging and discharging processes are affected by the presence of ZnO, indicating one well-defined plateau for each process compared to the previously reported bare graphene pyramids. In total, the material shows a value of 325 mAh g−1, a capacitance retention factor of 92% after 5000 scans, and a coulombic efficiency of 100% for the first scan that drops to 85% for the 5000th scan. This excellent performance is the result of the effect of ZnO and graphene that combines two Li+ accommodation sites, and the contribution of graphene pyramids, which provides more available sites to favor lithium storage capacity. Hence, this anode may be a promising electrode material for lithium-ion batteries. Full article
(This article belongs to the Special Issue Nano Carbon for Batteries Applications)
Show Figures

Figure 1

13 pages, 4645 KiB  
Article
Activated Carbon-Decorated Spherical Silicon Nanocrystal Composites Synchronously-Derived from Rice Husks for Anodic Source of Lithium-Ion Battery
by Sankar Sekar, Abu Talha Aqueel Ahmed, Akbar I. Inamdar, Youngmin Lee, Hyunsik Im, Deuk Young Kim and Sejoon Lee
Nanomaterials 2019, 9(7), 1055; https://doi.org/10.3390/nano9071055 - 23 Jul 2019
Cited by 35 | Viewed by 5689
Abstract
The nanocomposites of activated-carbon-decorated silicon nanocrystals (AC<nc-Si>AC) were synchronously derived in a single step from biomass rice husks, through the simple route of the calcination method together with the magnesiothermic reduction process. The final product, AC<nc-Si>AC, exhibited an aggregated structure of activated-carbon-encapsulated nanocrystalline [...] Read more.
The nanocomposites of activated-carbon-decorated silicon nanocrystals (AC<nc-Si>AC) were synchronously derived in a single step from biomass rice husks, through the simple route of the calcination method together with the magnesiothermic reduction process. The final product, AC<nc-Si>AC, exhibited an aggregated structure of activated-carbon-encapsulated nanocrystalline silicon spheres, and reveals a high specific surface area (498.5 m2/g). Owing to the mutualization of advantages from both silicon nanocrystals (i.e., low discharge potential and high specific capacity) and activated carbon (i.e., high porosity and good electrical conductivity), the AC<nc-Si>AC nanocomposites are able to play a substantial role as an anodic source material for the lithium-ion battery (LIB). Namely, a high coulombic efficiency (97.5%), a high discharge capacity (716 mAh/g), and a high reversible specific capacity (429 mAh/g after 100 cycles) were accomplished when using AC<nc-Si>AC as an LIB anode. The results advocate that the simultaneous synthesis of biomass-derived AC<nc-Si>AC is beneficial for green energy-storage device applications. Full article
(This article belongs to the Special Issue Functional Carbon Nanocomposites for Energy Storage and Conversion)
Show Figures

Graphical abstract

15 pages, 9311 KiB  
Article
The Novel Z-Scheme Ternary-Component Ag/AgI/α-MoO3 Catalyst with Excellent Visible-Light Photocatalytic Oxidative Desulfurization Performance for Model Fuel
by Yanzhong Zhen, Jie Wang, Feng Fu, Wenhao Fu and Yucang Liang
Nanomaterials 2019, 9(7), 1054; https://doi.org/10.3390/nano9071054 - 23 Jul 2019
Cited by 37 | Viewed by 4819
Abstract
The novel ternary-component Ag/AgI/α-MoO3 (AAM) photocatalyst was successfully fabricated by a facile hydrothermal method combined with a charge-induced physical adsorption and photo-reduced deposition technique. X-ray diffraction, scanning/transmission electron microscope, X-ray photoelectron, UV-vis diffuse reflectance, photoluminescence and electrochemical impedance spectroscopy were employed to [...] Read more.
The novel ternary-component Ag/AgI/α-MoO3 (AAM) photocatalyst was successfully fabricated by a facile hydrothermal method combined with a charge-induced physical adsorption and photo-reduced deposition technique. X-ray diffraction, scanning/transmission electron microscope, X-ray photoelectron, UV-vis diffuse reflectance, photoluminescence and electrochemical impedance spectroscopy were employed to characterize the composition, morphology, light-harvesting properties and charge transfer character of the as-synthesized catalysts. The ternary-component AAM heterojunctions exhibited an excellent visible-light photocatalytic oxidative desulfurization activity, in which the AAM-35 (35 represents weight percent of AgI in AAM sample) possessed the highest photocatalytic activity of the conversion of 97.5% in 2 h. On the basis of band structure analysis, radical trapping experiments and electron spin resonance (ESR) spectra results, two different catalytic mechanisms were suggested to elucidate how the photogenerated electron-hole pairs can be effectively separated for the enhancement of photocatalytic performance for dual composites AM-35 and ternary composites AAM-35 during the photocatalytic oxidative desulfurization (PODS) of thiophene. This investigation demonstrates that Z-scheme Ag/AgI/α-MoO3 will be a promising candidate material for refractory sulfur aromatic pollutant’s removal in fossil fuel. Full article
Show Figures

Graphical abstract

8 pages, 3430 KiB  
Article
Deposition of Silicon-Based Stacked Layers for Flexible Encapsulation of Organic Light Emitting Diodes
by Chia-Hsun Hsu, Yang-Shih Lin, Hsin-Yu Wu, Xiao-Ying Zhang, Wan-Yu Wu, Shui-Yang Lien, Dong-Sing Wuu and Yeu-Long Jiang
Nanomaterials 2019, 9(7), 1053; https://doi.org/10.3390/nano9071053 - 23 Jul 2019
Cited by 7 | Viewed by 3182
Abstract
In this study, inorganic silicon oxide (SiOx)/organic silicon (SiCxHy) stacked layers were deposited by a radio frequency inductively coupled plasma chemical vapor deposition system as a gas diffusion barrier for organic light-emitting diodes (OLEDs). The effects of [...] Read more.
In this study, inorganic silicon oxide (SiOx)/organic silicon (SiCxHy) stacked layers were deposited by a radio frequency inductively coupled plasma chemical vapor deposition system as a gas diffusion barrier for organic light-emitting diodes (OLEDs). The effects of thicknesses of SiOx and SiCxHy layers on the water vapor transmission rate (WVTR) and residual stress were investigated to evaluate the encapsulation capability. The experimental results showed that the lowest WVTR and residual stress were obtained when the thicknesses of SiOx and SiCxHy were 300 and 30 nm, respectively. Finally, different numbers of stacked pairs of SiOx/SiCxHy were applied to OLED encapsulation. The OLED encapsulated with the six-pair SiOx/SiCxHy exhibited a low turn-on voltage and low series resistance, and device lifetime increased from 7 h to more than 2000 h. Full article
Show Figures

Figure 1

12 pages, 1597 KiB  
Article
Codelivery of Genistein and miRNA-29b to A549 Cells Using Aptamer-Hybrid Nanoparticle Bioconjugates
by Koita Sacko, Karthik Thangavel and Sunday A. Shoyele
Nanomaterials 2019, 9(7), 1052; https://doi.org/10.3390/nano9071052 - 23 Jul 2019
Cited by 34 | Viewed by 4168
Abstract
This study aimed to evaluate the anti-cancer effect of a combination therapy of miRNA-29b and genistein loaded in mucin-1 (MUC 1)-aptamer functionalized hybrid nanoparticles in non-small cell lung cancer (NSCLC) A549 cell line. Genistein-miRNA-29b-loaded hybrid nanoparticles (GMLHN) was prepared and characterized. Particle size [...] Read more.
This study aimed to evaluate the anti-cancer effect of a combination therapy of miRNA-29b and genistein loaded in mucin-1 (MUC 1)-aptamer functionalized hybrid nanoparticles in non-small cell lung cancer (NSCLC) A549 cell line. Genistein-miRNA-29b-loaded hybrid nanoparticles (GMLHN) was prepared and characterized. Particle size and zeta potential were measured using photon correlation spectroscopy (PCS). Encapsulation efficiency and loading efficiency were determined using HPLC. Preferential internalization of MUC 1-aptamer functionalized GMLHN by A549 cells was evaluated and compared to normal MRC-5 cells. The ability of GMLHN to downregulate targeted oncoproteins Phosphorylated protein kinase, strain AK, Thymoma (Phosphorylated protein kinase B) (pAKT), Phosphorylated phosphoinositide 3-kinase (p-PI3K), DNA (cytosine-5-)-methyltransferase 3 beta (DNMT3B) and Myeloid Cell Leukemia Sequence 1 (MCL 1) was evaluated using western blot, while antiproliferative effect and ability to initiate apoptosis was also assessed in A549 cells. MUC 1-aptamer functionalized GMLHN nanoparticles were prepared. These nanoparticles were preferentially internalized by A549 cells but less so, in MRC-5 cells. pAKT, p-PI3K, DNMT3B and MCL 1 were efficiently downregulated by these nanoparticles without affecting the levels of AKT and PI3K in A549 cells. GMLHN demonstrated a superior antiproliferative effect compared to individual genistein and miRNA-29b-loaded nanoparticles. Results generated were able to demonstrate that genistein-miRNA-29b-loaded hybrid nanoparticles (GMLHN) could be a potential treatment modality for NSCLC because of the ability of the payloads to attack multiple targets. Full article
(This article belongs to the Special Issue Anti-Cancer, Biochemical and Immunological Activity of Nanoparticles )
Show Figures

Figure 1

15 pages, 3840 KiB  
Article
Aerogel Perfusion-Prepared h-BN/CNF Composite Film with Multiple Thermally Conductive Pathways and High Thermal Conductivity
by Xiu Wang, Zhihuai Yu, Liang Jiao, Huiyang Bian, Weisheng Yang, Weibing Wu, Huining Xiao and Hongqi Dai
Nanomaterials 2019, 9(7), 1051; https://doi.org/10.3390/nano9071051 - 23 Jul 2019
Cited by 23 | Viewed by 5744
Abstract
Hexagonal boron nitride (h-BN)-based heat-spreading materials have drawn considerable attention in electronic diaphragm and packaging fields because of their high thermal conductivity and desired electrical insulation properties. However, the traditional approach to fabricate thermally conductive composites usually suffers from low thermal conductivity, and [...] Read more.
Hexagonal boron nitride (h-BN)-based heat-spreading materials have drawn considerable attention in electronic diaphragm and packaging fields because of their high thermal conductivity and desired electrical insulation properties. However, the traditional approach to fabricate thermally conductive composites usually suffers from low thermal conductivity, and cannot meet the requirement of thermal management. In this work, novel h-BN/cellulose-nano fiber (CNF) composite films with excellent thermal conductivity in through plane and electrical insulation properties are fabricated via an innovative process, i.e., the perfusion of h-BN into porous three dimensional (3D) CNF aerogel skeleton to form the h-BN thermally conductive pathways by filling the CNF aerogel voids. When at an h-BN loading of 9.51 vol %, the thermal conductivity of h-BN/CNF aerogel perfusion composite film is 1.488 W·m−1·K−1 at through plane, an increase by 260.3%. The volume resistivity is 3.83 × 1014 Ω·cm, superior to that of synthetic polymer materials (about 109~1013 Ω·cm). Therefore, the resulting h-BN/CNF film is very promising to replace the traditional synthetic polymer materials for a broad spectrum of applications, including the field of electronics. Full article
Show Figures

Graphical abstract

31 pages, 30969 KiB  
Review
A Review on Brittle Fracture Nanomechanics by All-Atom Simulations
by Sandeep P. Patil and Yousef Heider
Nanomaterials 2019, 9(7), 1050; https://doi.org/10.3390/nano9071050 - 22 Jul 2019
Cited by 19 | Viewed by 5582
Abstract
Despite a wide range of current and potential applications, one primary concern of brittle materials is their sudden and swift collapse. This failure phenomenon exhibits an inability of the materials to sustain tension stresses in a predictable and reliable manner. However, advances in [...] Read more.
Despite a wide range of current and potential applications, one primary concern of brittle materials is their sudden and swift collapse. This failure phenomenon exhibits an inability of the materials to sustain tension stresses in a predictable and reliable manner. However, advances in the field of fracture mechanics, especially at the nanoscale, have contributed to the understanding of the material response and failure nature to predict most of the potential dangers. In the following contribution, a comprehensive review is carried out on molecular dynamics (MD) simulations of brittle fracture, wherein the method provides new data and exciting insights into fracture mechanism that cannot be obtained easily from theories or experiments on other scales. In the present review, an abstract introduction to MD simulations, advantages, current limitations and their applications to a range of brittle fracture problems are presented. Additionally, a brief discussion highlights the theoretical background of the macroscopic techniques, such as Griffith’s criterion, crack tip opening displacement, J-integral and other criteria that can be linked to the fracture mechanical properties at the nanoscale. The main focus of the review is on the recent advances in fracture analysis of highly brittle materials, such as carbon nanotubes, graphene, silicon carbide, amorphous silica, calcium carbonate and silica aerogel at the nanoscale. These materials are presented here due to their extraordinary mechanical properties and a wide scope of applications. The underlying review grants a more extensive unravelling of the fracture behaviour and mechanical properties at the nanoscale of brittle materials. Full article
Show Figures

Graphical abstract

18 pages, 4995 KiB  
Article
TiO2 and PEEK Reinforced 3D Printing PMMA Composite Resin for Dental Denture Base Applications
by Sheng-Gui Chen, Junzhong Yang, Yong-Guang Jia, Bingheng Lu and Li Ren
Nanomaterials 2019, 9(7), 1049; https://doi.org/10.3390/nano9071049 - 22 Jul 2019
Cited by 77 | Viewed by 8383
Abstract
The future of manufacturing applications in three-dimensional (3D) printing depends on the improvement and the development of materials suitable for 3D printing technology. This study aims to develop an applicable and convenient protocol for light-curing resin used in 3D industry, which could enhance [...] Read more.
The future of manufacturing applications in three-dimensional (3D) printing depends on the improvement and the development of materials suitable for 3D printing technology. This study aims to develop an applicable and convenient protocol for light-curing resin used in 3D industry, which could enhance antibacterial and mechanical properties of polymethyl methacrylate (PMMA) resin through the combination of nano-fillers of surface modified titanium dioxide (TiO2) and micro-fillers of polyetheretherketone (PEEK). PMMA-based composite resins with various additions of TiO2 and PEEK were prepared and submitted to characterizations including mechanical properties, distribution of the fillers (TiO2 or/and PEEK) on the fractured surface, cytotoxicity, antibacterial activity, and blood compatibility assessment. These results indicated that the reinforced composite resins of PMMA (TiO2-1%-PEEK-1%) possessed the most optimized properties compared to the other groups. In addition, we found the addition of 1% of TiO2 would be an effective amount to enhance both mechanical and antibacterial properties for PMMA composite resin. Furthermore, the model printed by PMMA (TiO2-1%-PEEK-1%) composite resin showed a smooth surface and a precise resolution, indicating this functional dental restoration material would be a suitable light-curing resin in 3D industry. Full article
Show Figures

Figure 1

28 pages, 4601 KiB  
Review
Nanophosphors-Based White Light Sources
by Maura Cesaria and Baldassare Di Bartolo
Nanomaterials 2019, 9(7), 1048; https://doi.org/10.3390/nano9071048 - 22 Jul 2019
Cited by 15 | Viewed by 5581
Abstract
Miniaturization requests and progress in nanofabrication are prompting worldwide interest in nanophosphors as white-emission mercury-free lighting sources. By comparison with their bulk counterparts, nanophosphors exhibit reduced concentration quenching effects and a great potential to enhance luminescence efficiency and tunability. In this paper, the [...] Read more.
Miniaturization requests and progress in nanofabrication are prompting worldwide interest in nanophosphors as white-emission mercury-free lighting sources. By comparison with their bulk counterparts, nanophosphors exhibit reduced concentration quenching effects and a great potential to enhance luminescence efficiency and tunability. In this paper, the physics of the nanophoshors is overviewed with a focus on the impact of spatial confinement and surface-to-volume ratio on the luminescence issue, as well as rare earth-activated multicolor emission for white light (WL) output. In this respect, the prominently practiced strategies to achieve WL emission are single nanophosphors directly yielding WL by means of co-doping and superposition of the individual red, green, and blue emissions from different nanophosphors. Recently, a new class of efficient broadband WL emitting nanophosphors has been proposed, i.e., nominally un-doped rare earth free oxide (yttrium oxide, Y2O3) nanopowders and Cr transition metal-doped garnet nanocrystals. In regard to this unconventional WL emission, the main points are: it is strictly a nanoscale phenomenon, the presence of an emitting center may favor WL emission without being necessary for observing it, and, its inherent origin is still unknown. A comparison between such an unconventional WL emission and the existing literature is presented to point out its novelty and superior lighting performances. Full article
(This article belongs to the Special Issue Luminescent Rare-Earth Based Nanomaterials)
Show Figures

Figure 1

10 pages, 1795 KiB  
Article
Optical Contrast and Raman Spectroscopy Techniques Applied to Few-Layer 2D Hexagonal Boron Nitride
by Marie Krečmarová, Daniel Andres-Penares, Ladislav Fekete, Petr Ashcheulov, Alejandro Molina-Sánchez, Rodolfo Canet-Albiach, Ivan Gregora, Vincent Mortet, Juan P. Martínez-Pastor and Juan F. Sánchez-Royo
Nanomaterials 2019, 9(7), 1047; https://doi.org/10.3390/nano9071047 - 22 Jul 2019
Cited by 16 | Viewed by 6826
Abstract
The successful integration of few-layer thick hexagonal boron nitride (hBN) into devices based on two-dimensional materials requires fast and non-destructive techniques to quantify their thickness. Optical contrast methods and Raman spectroscopy have been widely used to estimate the thickness of two-dimensional semiconductors and [...] Read more.
The successful integration of few-layer thick hexagonal boron nitride (hBN) into devices based on two-dimensional materials requires fast and non-destructive techniques to quantify their thickness. Optical contrast methods and Raman spectroscopy have been widely used to estimate the thickness of two-dimensional semiconductors and semi-metals. However, they have so far not been applied to two-dimensional insulators. In this work, we demonstrate the ability of optical contrast techniques to estimate the thickness of few-layer hBN on SiO2/Si substrates, which was also measured by atomic force microscopy. Optical contrast of hBN on SiO2/Si substrates exhibits a linear trend with the number of hBN monolayers in the few-layer thickness range. We also used bandpass filters (500–650 nm) to improve the effectiveness of the optical contrast methods for thickness estimations. We also investigated the thickness dependence of the high frequency in-plane E2g phonon mode of atomically thin hBN on SiO2/Si substrates by micro-Raman spectroscopy, which exhibits a weak thickness-dependence attributable to the in-plane vibration character of this mode. Ab initio calculations of the Raman active phonon modes of atomically thin free-standing crystals support these results, even if the substrate can reduce the frequency shift of the E2g phonon mode by reducing the hBN thickness. Therefore, the optical contrast method arises as the most suitable and fast technique to estimate the thickness of hBN nanosheets. Full article
(This article belongs to the Special Issue Optics and Transport on 2D Materials)
Show Figures

Figure 1

3 pages, 175 KiB  
Editorial
Special Issue “Synthesis and Applications of Functionalized Gold Nanosystems”
by Paolo Scrimin
Nanomaterials 2019, 9(7), 1046; https://doi.org/10.3390/nano9071046 - 22 Jul 2019
Cited by 1 | Viewed by 2035
Abstract
When I launched this Special Issue, I wrote: “Gold-based nanosystems are among the most interesting systems in the nanoworld because of their broad spectrum of applications, ranging from analyte detection to nanomedicine and the mimicry of enzymes, just to mention a few examples [...] Read more.
When I launched this Special Issue, I wrote: “Gold-based nanosystems are among the most interesting systems in the nanoworld because of their broad spectrum of applications, ranging from analyte detection to nanomedicine and the mimicry of enzymes, just to mention a few examples [...] Full article
(This article belongs to the Special Issue Synthesis and Applications of Functionalized Gold Nanosystems)
18 pages, 4439 KiB  
Review
Carbon Nanofiber-Based Functional Nanomaterials for Sensor Applications
by Zhuqing Wang, Shasha Wu, Jian Wang, Along Yu and Gang Wei
Nanomaterials 2019, 9(7), 1045; https://doi.org/10.3390/nano9071045 - 22 Jul 2019
Cited by 111 | Viewed by 6941
Abstract
Carbon nanofibers (CNFs) exhibit great potentials in the fields of materials science, biomedicine, tissue engineering, catalysis, energy, environmental science, and analytical science due to their unique physical and chemical properties. Usually, CNFs with flat, mesoporous, and porous surfaces can be synthesized by chemical [...] Read more.
Carbon nanofibers (CNFs) exhibit great potentials in the fields of materials science, biomedicine, tissue engineering, catalysis, energy, environmental science, and analytical science due to their unique physical and chemical properties. Usually, CNFs with flat, mesoporous, and porous surfaces can be synthesized by chemical vapor deposition and electrospinning techniques with subsequent chemical treatment. Meanwhile, the surfaces of CNFs are easy to modify with various materials to extend the applications of CNF-based hybrid nanomaterials in multiple fields. In this review, we focus on the design, synthesis, and sensor applications of CNF-based functional nanomaterials. The fabrication strategies of CNF-based functional nanomaterials by adding metallic nanoparticles (NPs), metal oxide NPs, alloy, silica, polymers, and others into CNFs are introduced and discussed. In addition, the sensor applications of CNF-based nanomaterials for detecting gas, strain, pressure, small molecule, and biomacromolecules are demonstrated in detail. This work will be beneficial for the readers to understand the strategies for fabricating various CNF-based nanomaterials, and explore new applications in energy, catalysis, and environmental science. Full article
(This article belongs to the Special Issue Carbon-Based Nanomaterials for (Bio)Sensors Development)
Show Figures

Figure 1

12 pages, 4540 KiB  
Article
Molecular Dynamics Simulation on Mechanical and Piezoelectric Properties of Boron Nitride Honeycomb Structures
by Lu Xie, Tianhua Wang, Chenwei He, Zhihui Sun and Qing Peng
Nanomaterials 2019, 9(7), 1044; https://doi.org/10.3390/nano9071044 - 21 Jul 2019
Cited by 9 | Viewed by 4020
Abstract
Boron nitride honeycomb structure is a new three-dimensional material similar to carbon honeycomb, which has attracted a great deal of attention due to its special structure and properties. In this paper, the tensile mechanical properties of boron nitride honeycomb structures in the zigzag, [...] Read more.
Boron nitride honeycomb structure is a new three-dimensional material similar to carbon honeycomb, which has attracted a great deal of attention due to its special structure and properties. In this paper, the tensile mechanical properties of boron nitride honeycomb structures in the zigzag, armchair and axial directions are studied at room temperature by using molecular dynamics simulations. Effects of temperature and strain rate on mechanical properties are also discussed. According to the observed tensile mechanical properties, the piezoelectric effect in the zigzag direction was analyzed for boron nitride honeycomb structures. The obtained results showed that the failure strains of boron nitride honeycomb structures under tensile loading were up to 0.83, 0.78 and 0.55 in the armchair, zigzag and axial directions, respectively, at room temperature. These findings indicated that boron nitride honeycomb structures have excellent ductility at room temperature. Moreover, temperature had a significant effect on the mechanical and tensile mechanical properties of boron nitride honeycomb structures, which can be improved by lowering the temperature within a certain range. In addition, strain rate affected the maximum tensile strength and failure strain of boron nitride honeycomb structures. Furthermore, due to the unique polarization of boron nitride honeycomb structures, they possessed an excellent piezoelectric effect. The piezoelectric coefficient e obtained from molecular dynamics was 0.702   C / m 2 , which was lower than that of the monolayer boron nitride honeycomb structures, e = 0.79   C / m 2 . Such excellent piezoelectric properties and failure strain detected in boron nitride honeycomb structures suggest a broad prospect for the application of these new materials in novel nanodevices with ultrahigh tensile mechanical properties and ultralight-weight materials. Full article
(This article belongs to the Special Issue Modeling and Experimental Characterization of Nanocomposite Materials)
Show Figures

Figure 1

18 pages, 11255 KiB  
Article
Zinc Oxide Nanoparticles Induce Autophagy and Apoptosis via Oxidative Injury and Pro-Inflammatory Cytokines in Primary Astrocyte Cultures
by Woo-Ju Song, Myung-Seon Jeong, Dong-Min Choi, Kil-Nam Kim and Myung-Bok Wie
Nanomaterials 2019, 9(7), 1043; https://doi.org/10.3390/nano9071043 - 21 Jul 2019
Cited by 38 | Viewed by 4272
Abstract
The present study examined the potential toxic concentrations of zinc oxide nanoparticles (ZnO NPs) and associated autophagy and apoptosis-related injuries in primary neocortical astrocyte cultures. Concentrations of ZnO NPs ≥3 μg/mL induced significant toxicity in the astrocytes. At 24 h after exposure to [...] Read more.
The present study examined the potential toxic concentrations of zinc oxide nanoparticles (ZnO NPs) and associated autophagy and apoptosis-related injuries in primary neocortical astrocyte cultures. Concentrations of ZnO NPs ≥3 μg/mL induced significant toxicity in the astrocytes. At 24 h after exposure to the ZnO NPs, transmission electron microscopy revealed swelling of the endoplasmic reticulum (ER) and increased numbers of autophagolysosomes in the cultured astrocytes, and increased levels of LC3 (microtubule-associated protein 1 light chain 3)-mediated autophagy were identified by flow cytometry. Apoptosis induced by ZnO NP exposure was confirmed by the elevation of caspase-3/7 activity and 4′,6′-diamidino-2-phenylindole (DAPI) staining. Significant (p < 0.05) changes in the levels of glutathione peroxidase, superoxide dismutase, tumor necrosis factor (TNF-α), and interleukin-6 were observed by enzyme-linked immunoassay (ELISA) assay following the exposure of astrocyte cultures to ZnO NPs. Phosphatidylinositol 3-kinase (PI3K)/mitogen-activated protein kinase (MAPK) dual activation was induced by ZnO NPs in a dose-dependent manner. Additionally, the Akt (protein kinase B) inhibitor BML257 and the mTOR (mammalian target of rapamycin) inhibitor rapamycin contributed to the survival of astrocytes. Inhibitors of cyclooxygenase-2 and lipoxygenase attenuated ZnO NP-induced toxicity. Calcium-modulating compounds, antioxidants, and zinc/iron chelators also decreased ZnO NP-induced toxicity. Together, these results suggest that ZnO NP-induced autophagy and apoptosis may be associated with oxidative stress and the inflammatory process in primary astrocyte cultures. Full article
(This article belongs to the Special Issue Toxicity and Ecotoxicity of Nanomaterials)
Show Figures

Graphical abstract

20 pages, 4386 KiB  
Article
Biosynthesis of Silver Nanoparticles Mediated by Extracellular Pigment from Talaromyces purpurogenus and Their Biomedical Applications
by Sharad Bhatnagar, Toshiro Kobori, Deepak Ganesh, Kazuyoshi Ogawa and Hideki Aoyagi
Nanomaterials 2019, 9(7), 1042; https://doi.org/10.3390/nano9071042 - 21 Jul 2019
Cited by 74 | Viewed by 5844
Abstract
In recent years, green syntheses have been researched comprehensively to develop inexpensive and eco-friendly approaches for the generation of nanoparticles. In this context, plant and microbial sources are being examined to discover potential reducing agents. This study aims to utilize an extracellular pigment [...] Read more.
In recent years, green syntheses have been researched comprehensively to develop inexpensive and eco-friendly approaches for the generation of nanoparticles. In this context, plant and microbial sources are being examined to discover potential reducing agents. This study aims to utilize an extracellular pigment produced by Talaromyces purpurogenus as a prospective reducing agent to synthesize silver nanoparticles (AgNPs). Biosynthesized AgNPs were characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), electron probe micro analyser (EPMA), and zeta potential. The pigment functional groups involved in the generation of AgNPs were investigated using Fourier transform infrared spectroscopy. TEM images showed that the generated nanoparticles were spherical, hexagonal, rod-shaped, and triangular-shaped with a particle size distribution from 4 to 41 nm and exhibited a surface plasmon resonance at around 410 nm. DLS and zeta potential studies revealed that the particles were polydispersed and stable (−24.8 mV). EPMA confirmed the presence of elemental silver in the samples. Biosynthesized AgNPs exhibited minimum inhibitory concentrations of 32 and 4 μg/mL against E. coli and S. epidermidis, respectively. Further, cytotoxicity of the AgNPs was investigated against human cervical cancer (HeLa), human liver cancer (HepG2), and human embryonic kidney (HEK-293) cell lines using 5-fluorouracil as a positive control. A significant activity was recorded against HepG2 cell line with a half-maximal inhibitory concentration of 11.1 μg/mL. Full article
(This article belongs to the Special Issue Advanced Biocompatible Nanomaterials)
Show Figures

Graphical abstract

20 pages, 6328 KiB  
Article
In Vitro Toxicity of TiO2:SiO2 Nanocomposites with Different Photocatalytic Properties
by Rossella Bengalli, Simona Ortelli, Magda Blosi, Anna Costa, Paride Mantecca and Luisa Fiandra
Nanomaterials 2019, 9(7), 1041; https://doi.org/10.3390/nano9071041 - 21 Jul 2019
Cited by 21 | Viewed by 3705
Abstract
The enormous technological relevance of titanium dioxide (TiO2) nanoparticles (NPs) and the consequent concerns regarding potentially hazardous effects that exposure during production, use, and disposal can generate, encourage material scientists to develop and validate intrinsically safe design solution (safe-by-design). Under this [...] Read more.
The enormous technological relevance of titanium dioxide (TiO2) nanoparticles (NPs) and the consequent concerns regarding potentially hazardous effects that exposure during production, use, and disposal can generate, encourage material scientists to develop and validate intrinsically safe design solution (safe-by-design). Under this perspective, the encapsulation in a silica dioxide (SiO2) matrix could be an effective strategy to improve TiO2 NPs safety, preserving photocatalytic and antibacterial properties. In this work, A549 cells were used to investigate the toxic effects of silica-encapsulated TiO2 having different ratios of TiO2 and SiO2 (1:1, 1:3, and 3:1). NPs were characterized by electron microscopy and dynamic light scattering, and cell viability, oxidative stress, morphological changes, and cell cycle alteration were evaluated. Resulting data demonstrated that NPs with lower content of SiO2 are able to induce cytotoxic effects, triggered by oxidative stress and resulting in cell necrosis and cell cycle alteration. The physicochemical properties of NPs are responsible for their toxicity. Particles with small size and high stability interact with pulmonary cells more effectively, and the different ratio among silica and titania plays a crucial role in the induced cytotoxicity. These results strengthen the need to take into account a safe(r)-by-design approach in the development of new nanomaterials for research and manufacturing. Full article
(This article belongs to the Special Issue Toxicity and Ecotoxicity of Nanomaterials)
Show Figures

Figure 1

14 pages, 5429 KiB  
Article
Surface, Interface, and Temperature Effects on the Phase Separation and Nanoparticle Self Assembly of Bi-Metallic Ni0.5Ag0.5: A Molecular Dynamics Study
by Ryan H. Allaire, Abhijeet Dhakane, Reece Emery, P. Ganesh, Philip D. Rack, Lou Kondic, Linda Cummings and Miguel Fuentes-Cabrera
Nanomaterials 2019, 9(7), 1040; https://doi.org/10.3390/nano9071040 - 21 Jul 2019
Cited by 7 | Viewed by 4273
Abstract
Classical molecular dynamics (MD) simulations were used to investigate how free surfaces, as well as supporting substrates, affect phase separation in a NiAg alloy. Bulk samples, droplets, and droplets deposited on a graphene substrate were investigated at temperatures that spanned regions of interest [...] Read more.
Classical molecular dynamics (MD) simulations were used to investigate how free surfaces, as well as supporting substrates, affect phase separation in a NiAg alloy. Bulk samples, droplets, and droplets deposited on a graphene substrate were investigated at temperatures that spanned regions of interest in the bulk NiAg phase diagram, i.e., miscible and immiscible liquid, liquid-crystal, and crystal-crystal regions. Using MD simulations to cool down a bulk sample from 3000 K to 800 K, it was found that phase separation below 2400 K takes place in agreement with the phase diagram. When free surface effects were introduced, phase separation was accompanied by a core-shell transformation: spherical droplets created from the bulk samples became core-shell nanoparticles with a shell made mostly of Ag atoms and a core made of Ni atoms. When such droplets were deposited on a graphene substrate, the phase separation was accompanied by Ni layering at the graphene interface and Ag at the vacuum interface. Thus, it should be possible to create NiAg core-shell and layer-like nanostructures by quenching liquid NiAg samples on tailored substrates. Furthermore, interesting bimetallic nanoparticle morphologies might be tuned via control of the surface and interface energies and chemical instabilities of the system. Full article
Show Figures

Figure 1

12 pages, 50218 KiB  
Article
Effect of Ce Doping on the Structure and Chemical Stability of Nano-α-Fe2O3
by Junxiang Ning, Peiyang Shi, Maofa Jiang, Chengjun Liu and Xiaoliang Li
Nanomaterials 2019, 9(7), 1039; https://doi.org/10.3390/nano9071039 - 21 Jul 2019
Cited by 12 | Viewed by 3587
Abstract
Ce-doped nano-α-Fe2O3 was successfully synthesized via the hydrothermal method. The properties of the prepared particles were studied by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and electrochemical methods. [...] Read more.
Ce-doped nano-α-Fe2O3 was successfully synthesized via the hydrothermal method. The properties of the prepared particles were studied by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and electrochemical methods. It was found that the Ce element can be doped into the α-Fe2O3 lattice resulting in lattice distortion, which can refine the grain and improve the crystal surface’s integrity significantly. In addition, doping of Ce element can shorten the Fe–O bond length in the α-Fe2O3 crystal, cause a blue shift of the stretching vibration band, enhance binding energy of Fe–O and the chemical stability of the α-Fe2O3 crystal. Full article
Show Figures

Figure 1

16 pages, 4567 KiB  
Article
Ethynylation of Formaldehyde over Binary Cu-Based Catalysts: Study on Synergistic Effect between Cu+ Species and Acid/Base Sites
by Zhipeng Wang, Lijun Ban, Pingfan Meng, Haitao Li and Yongxiang Zhao
Nanomaterials 2019, 9(7), 1038; https://doi.org/10.3390/nano9071038 - 20 Jul 2019
Cited by 13 | Viewed by 3414
Abstract
Most studies on the Cu-based catalysts in the ethynylation of formaldehyde are merely focused on the tuning of electronic configuration and dispersion of the Cu+ species. So far, little attention has been paid to the synergy between Cu species and promoters. Herein, [...] Read more.
Most studies on the Cu-based catalysts in the ethynylation of formaldehyde are merely focused on the tuning of electronic configuration and dispersion of the Cu+ species. So far, little attention has been paid to the synergy between Cu species and promoters. Herein, binary nano-CuO-MOx catalysts (M = Si, Al, and Mg) were synthesized and the effects of the promoter on the surface basicity/acidity were systematically studied as well as the ethynylation performance of the nano-CuO-based catalysts. The results show that the introduction of MgO provided a large number of basic sites, which could coordinate with the active Cu+ species and facilitate the dissociation of acetylene as HC≡Cδ− and Hδ+. The strongly nucleophilic acetylenic carbon (HC≡Cδ−) is favorable to the attack at the electropositive carbonyl Cδ+ of formaldehyde. The MgO-promoted CuO catalyst showed the highest yield of BD (94%) and the highest stability (the BD yield decreased only from 94% to 82% after eight reaction cycles). SiO2 effectively dispersed Cu species, which improved catalytic activity and stability. However, the introduction of Al2O3 resulted in a large number of acidic sites on the catalyst’s surface. This led to the polymerization of acetylene, which covered the active sites and decreased the catalyst’s activity. Full article
Show Figures

Figure 1

16 pages, 6493 KiB  
Article
Sustained Release of Basic Fibroblast Growth Factor (bFGF) Encapsulated Polycaprolactone (PCL) Microspheres Promote Angiogenesis In Vivo
by Pala Arunkumar, Julie A. Dougherty, Jessica Weist, Naresh Kumar, Mark G. Angelos, Heather M. Powell and Mahmood Khan
Nanomaterials 2019, 9(7), 1037; https://doi.org/10.3390/nano9071037 - 20 Jul 2019
Cited by 25 | Viewed by 4844
Abstract
Coronary heart disease (CHD) is the leading cause of death in the Unites States and globally. The administration of growth factors to preserve cardiac function after myocardial infarction (MI) is currently being explored. Basic fibroblast growth factor (bFGF), a potent angiogenic factor has [...] Read more.
Coronary heart disease (CHD) is the leading cause of death in the Unites States and globally. The administration of growth factors to preserve cardiac function after myocardial infarction (MI) is currently being explored. Basic fibroblast growth factor (bFGF), a potent angiogenic factor has poor clinical efficacy due to its short biological half-life and low plasma stability. The goal of this study was to develop bFGF-loaded polycaprolactone (PCL) microspheres for sustained release of bFGF and to evaluate its angiogenic potential. The bFGF-PCL microspheres (bFGF-PCL-MS) were fabricated using the emulsion solvent-evaporation method and found to have spherical morphology with a mean size of 4.21 ± 1.28 µm. In vitro bFGF release studies showed a controlled release for up to 30 days. Treatment of HUVECs with bFGF-PCL-MS in vitro enhanced their cell proliferation and migration properties when compared to the untreated control group. Treatment of HUVECs with release media from bFGF-PCL-MS also significantly increased expression of angiogenic genes (bFGF and VEGFA) as compared to untreated cells. The in vivo angiogenic potential of these bFGF-PCL-MS was further confirmed in rats using a Matrigel plug assay with subsequent immunohistochemical staining showing increased expression of angiogenic markers. Overall, bFGF-PCL-MS could serve as a potential angiogenic agent to promote cell survival and angiogenesis following an acute myocardial infarction. Full article
(This article belongs to the Special Issue Application of Nanotechnology in Cardiology)
Show Figures

Graphical abstract

25 pages, 5158 KiB  
Review
Polymer-II-VI Nanocrystals Blends: Basic Physics and Device Applications to Lasers and LEDs
by Marco Anni
Nanomaterials 2019, 9(7), 1036; https://doi.org/10.3390/nano9071036 - 19 Jul 2019
Cited by 27 | Viewed by 4679
Abstract
Hybrid thin films that combine organic conjugated molecules and semiconductors nanocrystals (NCs) have been deeply investigated in the previous years, due to their capability to provide an extremely broad tuning of their electronic and optical properties. In this paper we review the main [...] Read more.
Hybrid thin films that combine organic conjugated molecules and semiconductors nanocrystals (NCs) have been deeply investigated in the previous years, due to their capability to provide an extremely broad tuning of their electronic and optical properties. In this paper we review the main aspects of the basic physics of the organic–inorganic interaction and the actual state of the art of lasers and light emitting diodes based on hybrid active materials. Full article
Show Figures

Figure 1

14 pages, 9593 KiB  
Article
ToF-SIMS 3D Analysis of Thin Films Deposited in High Aspect Ratio Structures via Atomic Layer Deposition and Chemical Vapor Deposition
by Alireza M. Kia, Nora Haufe, Sajjad Esmaeili, Clemens Mart, Mikko Utriainen, Riikka L. Puurunen and Wenke Weinreich
Nanomaterials 2019, 9(7), 1035; https://doi.org/10.3390/nano9071035 - 19 Jul 2019
Cited by 19 | Viewed by 7430
Abstract
For the analysis of thin films, with high aspect ratio (HAR) structures, time-of-flight secondary ion mass spectrometry (ToF-SIMS) overcomes several challenges in comparison to other frequently used techniques such as electron microscopy. The research presented herein focuses on two different kinds of HAR [...] Read more.
For the analysis of thin films, with high aspect ratio (HAR) structures, time-of-flight secondary ion mass spectrometry (ToF-SIMS) overcomes several challenges in comparison to other frequently used techniques such as electron microscopy. The research presented herein focuses on two different kinds of HAR structures that represent different semiconductor technologies. In the first study, ToF-SIMS is used to illustrate cobalt seed layer corrosion by the copper electrolyte within the large through-silicon-vias (TSVs) before and after copper electroplating. However, due to the sample’s surface topography, ToF-SIMS analysis proved to be difficult due to the geometrical shadowing effects. Henceforth, in the second study, we introduce a new test platform to eliminate the difficulties with the HAR structures, and again, use ToF-SIMS for elemental analysis. We use data image slicing of 3D ToF-SIMS analysis combined with lateral HAR test chips (PillarHall™) to study the uniformity of silicon dopant concentration in atomic layer deposited (ALD) HfO2 thin films. Full article
Show Figures

Figure 1

14 pages, 3823 KiB  
Article
A Comparison Study of Functional Groups (Amine vs. Thiol) for Immobilizing AuNPs on Zeolite Surface
by Xi Rao, Michaël Tatoulian, Cédric Guyon, Stephanie Ognier, Chenglin Chu and Ali Abou Hassan
Nanomaterials 2019, 9(7), 1034; https://doi.org/10.3390/nano9071034 - 19 Jul 2019
Cited by 23 | Viewed by 5940
Abstract
Immobilization of gold nanoparticles (AuNPs) on the surface of zeolite has received a great interest due to Au@zeolite’s unique characteristics and high performance for catalysis. In this work we studied the grafting of two different functional molecules; one having an amine group (3-aminopropyl)triethoxysilane [...] Read more.
Immobilization of gold nanoparticles (AuNPs) on the surface of zeolite has received a great interest due to Au@zeolite’s unique characteristics and high performance for catalysis. In this work we studied the grafting of two different functional molecules; one having an amine group (3-aminopropyl)triethoxysilane (APTES) and the second having a thiol group (3-mercaptopropyl)trimethoxysilane (MPTES) on the surface of zeolite using the same wet chemistry method. The modified zeolite surfaces were characterized using zeta potential measurements; diffuse reflectance infrared fourier transform (DRIFT) and X-ray photoelectron spectroscopy (XPS). The results confirmed a successful deposition of both functional groups at the topmost surface of the zeolite. Furthermore; transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectroscopy and XPS results clearly evidenced that APTES provided a better AuNPs immobilization than MPTES as a result of; (1) less active functions obtained after MPTES deposition, and (2) the better attaching ability of thiol to the gold surface. Full article
(This article belongs to the Special Issue Plasmonic Nanostructures and Related Applications)
Show Figures

Graphical abstract

14 pages, 2831 KiB  
Article
Homogeneous Core/Shell NiMoO4@NiMoO4 and Activated Carbon for High Performance Asymmetric Supercapacitor
by Jia Yi Dong, Jin Cheng Xu, Kwun Nam Hui, Ye Yang, Shi Chen Su, Lin Li, Xi Tian Zhang, Kar Wei Ng, Shuang Peng Wang and Zi Kang Tang
Nanomaterials 2019, 9(7), 1033; https://doi.org/10.3390/nano9071033 - 19 Jul 2019
Cited by 11 | Viewed by 4280
Abstract
Here, we report the extraordinary electrochemical energy storage capability of NiMoO4@NiMoO4 homogeneous hierarchical nanosheet-on-nanowire arrays (SOWAs), synthesized on nickel substrate by a two-stage hydrothermal process. Comparatively speaking, the SOWAs electrode displays superior electrochemical performances over the pure NiMoO4 nanowire [...] Read more.
Here, we report the extraordinary electrochemical energy storage capability of NiMoO4@NiMoO4 homogeneous hierarchical nanosheet-on-nanowire arrays (SOWAs), synthesized on nickel substrate by a two-stage hydrothermal process. Comparatively speaking, the SOWAs electrode displays superior electrochemical performances over the pure NiMoO4 nanowire arrays. Such improvements can be ascribed to the characteristic homogeneous hierarchical structure, which not only effectively increases the active surface areas for fast charge transfer, but also reduces the electrode resistance significantly by eliminating the potential barrier at the nanowire/nanosheet junction, an issue usually seen in other reported heterogeneous architectures. We further evaluate the performances of the SOWAs by constructing an asymmetric hybrid supercapacitor (ASC) with the SOWAs and activated carbon (AC). The optimized ASC shows excellent electrochemical performances with 47.2 Wh/kg in energy density of 1.38 kW/kg at 0–1.2 V. Moreover, the specific capacity retention can be as high as 91.4% after 4000 cycles, illustrating the remarkable cycling stability of the NiMoO4@NiMoO4//AC ASC device. Our results show that this unique NiMoO4@NiMoO4 SOWA has great prospects for future energy storage applications. Full article
(This article belongs to the Special Issue Metal-Oxide Nanomaterials for Energy Application)
Show Figures

Figure 1

15 pages, 6658 KiB  
Article
Characterization of Sn4P3–Carbon Composite Films for Lithium-Ion Battery Anode Fabricated by Aerosol Deposition
by Toki Moritaka, Yuh Yamashita, Tomohiro Tojo, Ryoji Inada and Yoji Sakurai
Nanomaterials 2019, 9(7), 1032; https://doi.org/10.3390/nano9071032 - 19 Jul 2019
Cited by 13 | Viewed by 5174
Abstract
We fabricated tin phosphide–carbon (Sn4P3/C) composite film by aerosol deposition (AD) and investigated its electrochemical performance for a lithium-ion battery anode. Sn4P3/C composite powders prepared by a ball milling was used as raw material and [...] Read more.
We fabricated tin phosphide–carbon (Sn4P3/C) composite film by aerosol deposition (AD) and investigated its electrochemical performance for a lithium-ion battery anode. Sn4P3/C composite powders prepared by a ball milling was used as raw material and deposited onto a stainless steel substrate to form the composite film via impact consolidation. The Sn4P3/C composite film fabricated by AD showed much better electrochemical performance than the Sn4P3 film without complexing carbon. Although both films showed initial discharge (Li+ extraction) capacities of approximately 1000 mAh g−1, Sn4P3/C films retained higher reversible capacity above 700 mAh g−1 after 100 cycles of charge and discharge processes while the capacity of Sn4P3 film rapidly degraded with cycling. In addition, by controlling the potential window in galvanostatic testing, Sn4P3/C composite film retained the reversible capacity of 380 mAh g−1 even after 400 cycles. The complexed carbon works not only as a buffer to suppress the collapse of electrodes by large volume change of Sn4P3 in charge and discharge reactions but also as an electronic conduction path among the atomized active material particles in the film. Full article
Show Figures

Figure 1

9 pages, 9216 KiB  
Article
Formation of Highly Ordered Platinum Nanowire Arrays on Silicon via Laser-Induced Self-Organization
by Michael Dasbach, Hendrik M. Reinhardt and Norbert A. Hampp
Nanomaterials 2019, 9(7), 1031; https://doi.org/10.3390/nano9071031 - 18 Jul 2019
Cited by 8 | Viewed by 2920
Abstract
Laser-induced periodic surface structures (LIPSS) provide an elegant solution for the generation of highly ordered periodic patterns on the surface of solids. In this study, LIPSS are utilized for the formation of periodic platinum nanowire arrays. In a process based on laser-stimulated self-organization, [...] Read more.
Laser-induced periodic surface structures (LIPSS) provide an elegant solution for the generation of highly ordered periodic patterns on the surface of solids. In this study, LIPSS are utilized for the formation of periodic platinum nanowire arrays. In a process based on laser-stimulated self-organization, platinum thin films, sputter-deposited onto silicon, are transformed into nanowire arrays with an average periodicity of 538 nm. The width of the platinum nanowires is adjustable in a range from 20 nm to 250 nm by simply adjusting the thickness of the initial platinum thin films in a range from 0.3 nm to 4.3 nm. With increasing width, platinum nanowires show a rising tendency to sink into the surface of the silicon wafer, thus indicating alloying between platinum and silicon upon LIPSS-formation by a nanosecond-pulsed laser. The Pt/silicon wires may be etched away, leaving a complementary nanostructure in the silicon surface. Full article
Show Figures

Graphical abstract

19 pages, 3838 KiB  
Review
Recent Advances and Perspectives of Molecularly Imprinted Polymer-Based Fluorescent Sensors in Food and Environment Analysis
by Guangyang Liu, Xiaodong Huang, Lingyun Li, Xiaomin Xu, Yanguo Zhang, Jun Lv and Donghui Xu
Nanomaterials 2019, 9(7), 1030; https://doi.org/10.3390/nano9071030 - 18 Jul 2019
Cited by 62 | Viewed by 6319
Abstract
Molecular imprinting technology (MIT), also known as molecular template technology, is a new technology involving material chemistry, polymer chemistry, biochemistry, and other multi-disciplinary approaches. This technology is used to realize the unique recognition ability of three-dimensional crosslinked polymers, called the molecularly imprinted polymers [...] Read more.
Molecular imprinting technology (MIT), also known as molecular template technology, is a new technology involving material chemistry, polymer chemistry, biochemistry, and other multi-disciplinary approaches. This technology is used to realize the unique recognition ability of three-dimensional crosslinked polymers, called the molecularly imprinted polymers (MIPs). MIPs demonstrate a wide range of applicability, good plasticity, stability, and high selectivity, and their internal recognition sites can be selectively combined with template molecules to achieve selective recognition. A molecularly imprinted fluorescence sensor (MIFs) incorporates fluorescent materials (fluorescein or fluorescent nanoparticles) into a molecularly imprinted polymer synthesis system and transforms the binding sites between target molecules and molecularly imprinted materials into readable fluorescence signals. This sensor demonstrates the advantages of high sensitivity and selectivity of fluorescence detection. Molecularly imprinted materials demonstrate considerable research significance and broad application prospects. They are a research hotspot in the field of food and environment safety sensing analysis. In this study, the progress in the construction and application of MIFs was reviewed with emphasis on the preparation principle, detection methods, and molecular recognition mechanism. The applications of MIFs in food and environment safety detection in recent years were summarized, and the research trends and development prospects of MIFs were discussed. Full article
(This article belongs to the Special Issue Nanoscale Optical Sensing)
Show Figures

Figure 1

21 pages, 6386 KiB  
Review
Plasmonic Nanofactors as Switchable Devices to Promote or Inhibit Neuronal Activity and Function
by Karrer M. Alghazali, Rabab N. Hamzah, Zeid A. Nima, Richard Steiner, Madhu Dhar, David E. Anderson, Abdallah Hayar, Robert J. Griffin and Alexandru S. Biris
Nanomaterials 2019, 9(7), 1029; https://doi.org/10.3390/nano9071029 - 18 Jul 2019
Cited by 6 | Viewed by 3518
Abstract
Gold nanosystems have been investigated extensively for a variety of applications, from specific cancer cell targeting to tissue regeneration. Specifically, a recent and exciting focus has been the gold nanosystems’ interface with neuronal biology. Researchers are investigating the ability to use these systems [...] Read more.
Gold nanosystems have been investigated extensively for a variety of applications, from specific cancer cell targeting to tissue regeneration. Specifically, a recent and exciting focus has been the gold nanosystems’ interface with neuronal biology. Researchers are investigating the ability to use these systems neuronal applications ranging from the enhancement of stem cell differentiation and therapy to stimulation or inhibition of neuronal activity. Most of these new areas of research are based on the integration of the plasmonic properties of such nanosystems into complex synthetic extracellular matrices (ECM) that can interact and affect positively the activity of neuronal cells. Therefore, the ability to integrate the plasmonic properties of these nanoparticles into multidimensional and morphological structures to support cellular proliferation and activity is potentially of great interest, particularly to address medical conditions that are currently not fully treatable. This review discusses some of the promising developments and unique capabilities offered by the integration of plasmonic nanosystems into morphologically complex ECM devices, designed to control and study the activity of neuronal cells. Full article
Show Figures

Figure 1

18 pages, 3090 KiB  
Article
Preparation and Characterization of Self Nano-Emulsifying Drug Delivery System Loaded with Citraland Its Antiproliferative Effect on Colorectal Cells In Vitro
by Mira Nadiah Mohd Izham, Yazmin Hussin, Muhammad Nazirul Mubin Aziz, Swee Keong Yeap, Heshu Sulaiman Rahman, Mas Jaffri Masarudin, Nurul Elyani Mohamad, Rasedee Abdullah and Noorjahan Banu Alitheen
Nanomaterials 2019, 9(7), 1028; https://doi.org/10.3390/nano9071028 - 18 Jul 2019
Cited by 55 | Viewed by 5731
Abstract
Citral is an active compound naturally found in lemongrass, lemon, and lime. Although this pale-yellow liquid confers low water solubility, the compound has been reported to possess good therapeutic features including antiproliferative and anticancer modalities. The self nano-emulsifying drug delivery system (SNEDDS) is [...] Read more.
Citral is an active compound naturally found in lemongrass, lemon, and lime. Although this pale-yellow liquid confers low water solubility, the compound has been reported to possess good therapeutic features including antiproliferative and anticancer modalities. The self nano-emulsifying drug delivery system (SNEDDS) is a type of liquid-lipid nanocarrier that is suitable for the loading of insolubilized oil-based compound such as Citral. This study reports the design and optimization of a SNEDDS formulation, synthesis and characterization as well as loading with Citral (CIT-SNEDDS). Further assessment of theantiproliferative effects of CIT-SNEDDS towards colorectal cancer cells was also conducted. SNEDDS composed of coconut oil, dimethyl sulfoxide (DMSO) and Tween 80. CIT-SNEDDS was prepared via gentle agitation of SNEDDS with 0.5% Citral for 72 h at room temperature. Physicochemical characterization was performed using several physicochemical analyses. The average particle size of CIT-SNEDDS was16.86 ± 0.15 nm, zeta potential of 0.58 ± 0.19 mV, and polydispersity index (PDI) of 0.23 ± 0.01. In vitro drug release of Citral from CIT-SNEDDS was 79.25% of release, and for Citral the release percentage was 93.56% over 72 h. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay was done to determine the cytotoxicity effect of CIT-SNEDDS in human colorectal cancer cell lines HT29 and SW620. The half maximal inhibitory concentrations (IC50) for 72 hof CIT-SNEDDS and Citral on SW620 were 16.50 ± 0.87 µg/mL and 22.50 ± 2.50 µg/mL, respectively. The IC50 values of CIT-SNEDDS and Citral after 72 h of treatment on HT29 were 34.10 ± 0.30 µg/mL and 21.77 ± 0.23 µg/mL, respectively. This study strongly suggests that CIT-SNEDDS has permitted the sustained release of Citral and that CIT-SNEDDS constitutes a potential soluble drug nanocarrier that is effective against colorectal cancer cells. Full article
(This article belongs to the Special Issue Nanostructured Materials and Natural Extract)
Show Figures

Graphical abstract

Previous Issue
Next Issue
Back to TopTop