Applied Sciences

19 pages, 39778 KiB

Open AccessArticle

Simulating Atmospheric Characteristics and Daytime Astronomical Seeing Using Weather Research and Forecasting Model

by A. Y. Shikhovtsev, P. G. Kovadlo, A. A. Lezhenin, V. S. Gradov, P. O. Zaiko, M. A. Khitrykau, K. E. Kirichenko, M. B. Driga, A. V. Kiselev, I. V. Russkikh, V. A. Obolkin and M. Yu. Shikhovtsev

Appl. Sci. 2023, 13(10), 6354; https://doi.org/10.3390/app13106354 - 22 May 2023

Cited by 1 | Viewed by 1455

Abstract

The present study is aimed at the development of a novel empirical base for application to ground-based astronomical telescopes. A Weather Research and Forecasting (WRF) model is used for description of atmospheric flow structure with a high spatial resolution within the Baikal Astrophysical [...] Read more.

The present study is aimed at the development of a novel empirical base for application to ground-based astronomical telescopes. A Weather Research and Forecasting (WRF) model is used for description of atmospheric flow structure with a high spatial resolution within the Baikal Astrophysical Observatory (BAO) region. Mesoscale vortex structures are found within the atmospheric boundary layer, which affect the quality of astronomical images. The results of simulations show that upward air motions in the lower atmosphere are suppressed both above the cold surface of Lake Baikal and inside mesoscale eddy structures. A model of the outer scale of turbulence for BAO is developed. In this work, we consider the seeing parameter that represents the full width at half-maximum of the point spread function. Optical turbulence profiles are obtained and daytime variations of seeing are estimated. Vertical profiles of optical turbulence are optimized taking into account data from direct optical observations of solar images. Full article

(This article belongs to the Special Issue Advanced Observation for Geophysics, Climatology and Astronomy)

► Show Figures

Figure 1

43 pages, 3373 KiB

Open AccessReview

Review of Anomaly Detection Algorithms for Data Streams

by Tianyuan Lu, Lei Wang and Xiaoyong Zhao

Appl. Sci. 2023, 13(10), 6353; https://doi.org/10.3390/app13106353 - 22 May 2023

Cited by 2 | Viewed by 5422

Abstract

With the rapid development of emerging technologies such as self-media, the Internet of Things, and cloud computing, massive data applications are crossing the threshold of the era of real-time analysis and value realization, which makes data streams ubiquitous in all kinds of industries. [...] Read more.

With the rapid development of emerging technologies such as self-media, the Internet of Things, and cloud computing, massive data applications are crossing the threshold of the era of real-time analysis and value realization, which makes data streams ubiquitous in all kinds of industries. Therefore, detecting anomalies in such data streams could be very important and full of challenges. For example, in industries such as electricity and finance, data stream anomalies often contain information that can help avoiding risks and support decision making. However, most traditional anomaly detection algorithms rely on acquiring global information about the data, which is hard to apply to stream data scenarios. Currently, the reviews of the algorithm in the field of anomaly detection, both domestically and internationally, tend to focus on the exposition of anomaly detection algorithms in static data environments, while lacking in the induction and analysis of anomaly detection algorithms in the context of streaming data. As a result, unlike the existing literature reviews, this review provides the current mainstream anomaly detection algorithms in data streaming scenarios and categorizes them into three types on the basis of their fundamental principles: (1) based on offline learning; (2) based on semi-online learning; (3) based on online learning. This review discusses the current state of research on data stream anomaly detection and studies the key issues in various algorithms for detecting anomalies in data streams on the basis of concise summarization. Moreover, the review conducts a detailed comparison of the pros and cons of the algorithms. Finally, the future challenges in the field are analyzed, and future research directions are proposed. Full article

► Show Figures

Figure 1

26 pages, 5244 KiB

Open AccessArticle

Closed-Form Method for Atmospheric Correction (CMAC) of Smallsat Data Using Scene Statistics

by David P. Groeneveld, Timothy A. Ruggles and Bo-Cai Gao

Appl. Sci. 2023, 13(10), 6352; https://doi.org/10.3390/app13106352 - 22 May 2023

Cited by 2 | Viewed by 1158

Abstract

High-cadence Earth observation smallsat images offer potential for near real-time global reconnaissance of all sunlit cloud-free locations. However, these data must be corrected to remove light-transmission effects from variable atmospheric aerosol that degrade image interpretability. Although existing methods may work, they require ancillary [...] Read more.

High-cadence Earth observation smallsat images offer potential for near real-time global reconnaissance of all sunlit cloud-free locations. However, these data must be corrected to remove light-transmission effects from variable atmospheric aerosol that degrade image interpretability. Although existing methods may work, they require ancillary data that delays image output, impacting their most valuable applications: intelligence, surveillance, and reconnaissance. Closed-form Method for Atmospheric Correction (CMAC) is based on observed atmospheric effects that brighten dark reflectance while darkening bright reflectance. Using only scene statistics in near real-time, CMAC first maps atmospheric effects across each image, then uses the resulting grayscale to reverse the effects to deliver spatially correct surface reflectance for each pixel. CMAC was developed using the European Space Agency’s Sentinel-2 imagery. After a rapid calibration that customizes the method for each imaging optical smallsat, CMAC can be applied to atmospherically correct visible through near-infrared bands. To assess CMAC functionality against user-applied state-of-the-art software, Sen2Cor, extensive tests were made of atmospheric correction performance across dark to bright reflectance under a wide range of atmospheric aerosol on multiple images in seven locations. CMAC corrected images faster, with greater accuracy and precision over a range of atmospheric effects more than twice that of Sen2Cor. Full article

(This article belongs to the Special Issue Small Satellites Missions and Applications)

► Show Figures

Figure 1

29 pages, 7672 KiB

Open AccessArticle

Thermographic Investigation on Fluid Oscillations and Transverse Interactions in a Fully Metallic Flat-Plate Pulsating Heat Pipe

by Luca Pagliarini, Luca Cattani, Vincent Ayel, Maksym Slobodeniuk, Cyril Romestant and Fabio Bozzoli

Appl. Sci. 2023, 13(10), 6351; https://doi.org/10.3390/app13106351 - 22 May 2023

Cited by 3 | Viewed by 1121

Abstract

The present investigation deals with the quantification of fluid oscillation frequencies in a metallic pulsating heat pipe tested at varying heat loads and orientations. The aim is to design a robust technique for the study of the inner fluid dynamics without adopting typical [...] Read more.

The present investigation deals with the quantification of fluid oscillation frequencies in a metallic pulsating heat pipe tested at varying heat loads and orientations. The aim is to design a robust technique for the study of the inner fluid dynamics without adopting typical experimental solutions, such as direct fluid visualizations through transparent inserts. The studied device is made of copper, and it is partially filled with a water–ethanol mixture (20 wt.% of ethanol). Heat fluxes locally exchanged between the working fluid and the device walls are first assessed through the inverse heat conduction problem resolution approach by processing outer wall temperature distributions acquired by thermography. The estimated local heat transfer quantities are therefore processed to quantify the fluid oscillatory behavior in every device branch during the intermittent flow and full activation regimes, thus providing a deeper insight into the heat transfer modes. After dealing with a further validation of the inverse approach in terms of oscillation frequency restoration capability, the wall-to-fluid heat fluxes referred to each channel are processed by means of the wavelet method. Scalograms and power spectra of the considered signals are presented for a time-based analysis of the working fluid oscillations, as well as for the identification of dominant oscillation frequencies. Fluid motion is then quantified in terms of the continuity of fluid oscillations and activity of channels by applying a scalogram denoising technique named K-means clustering method. Moreover, a statistical reduction of the channel-wise dominant oscillation frequencies is performed to provide useful references for the interpretation of the overall oscillatory behavior. The link between oscillations and transverse interactions is finally investigated. The vertical bottom-heated mode exhibits stronger fluid oscillations with respect to the horizontal mode, with fluid oscillation frequencies ranging from 0.78 up to 1 Hz. Nonetheless, the fluid motion is more stable in terms of oscillation frequency between channels when the device operates in the horizontal orientation probably due to negligible buoyancy effects. Moreover, thermal interactions between adjacent channels are found to be stronger when the oscillatory behavior presents similar features from channel to channel in horizontal orientation. The proposed method for fluid oscillation analyses in fully metallic flat-plate pulsating heat pipes can be effectively adopted to other flat-plate layouts without any need for transparent windows, thus reducing the overall complexity of experimental set-ups and providing, at the same time, a good insight into the inner fluid dynamics. Full article

(This article belongs to the Special Issue Recent Progress in Infrared Thermography)

► Show Figures

Figure 1

15 pages, 2078 KiB

Open AccessArticle

Objective Prediction of Human Visual Acuity Using Image Quality Metrics

by Julián Espinosa Tomás, Jorge Pérez Rodríguez, David Más Candela, Carmen Vázquez Ferri and Esther Perales

Appl. Sci. 2023, 13(10), 6350; https://doi.org/10.3390/app13106350 - 22 May 2023

Viewed by 938

Abstract

This work addresses the objective prediction of human uncorrected decimal visual acuity, an unsolved challenge due to the contribution of both physical and neural factors. An alternative approach to assess the image quality of the human visual system can be addressed from the [...] Read more.

This work addresses the objective prediction of human uncorrected decimal visual acuity, an unsolved challenge due to the contribution of both physical and neural factors. An alternative approach to assess the image quality of the human visual system can be addressed from the image and video processing perspective. Human tolerance to image degradation is quantified by mean opinion scores, and several image quality assessment algorithms are used to maintain, control, and improve the quality of processed images. The aberration map of the eye is used to obtain the degraded theoretical image from a set of natural images. The amount of distortion added by the eye to the natural image was quantified using different image processing metrics, and the correlation between the result of each metric and subjective visual acuity was assessed. The correlation obtained for a model based on a linear combination of the normalized mean square error metric and the feature similarity index metric was very good. It was concluded that the proposed method could be an objective way to determine subjects’ monocular and uncorrected decimal visual acuity with low uncertainty. Full article

(This article belongs to the Section Biomedical Engineering)

► Show Figures

Figure 1

20 pages, 6864 KiB

Open AccessArticle

Challenges and Recommendations for Improved Identification of Low ILUC-Risk Agricultural Biomass

by Cato Sandford, Chris Malins and Calliope Panoutsou

Appl. Sci. 2023, 13(10), 6349; https://doi.org/10.3390/app13106349 - 22 May 2023

Viewed by 1075

Abstract

The “low indirect land use change risk” (“low ILUC-risk”) concept was developed to assess whether crop-based biofuels would compete with other land uses and cause the expansion of agricultural land. At the core of low ILUC-risk is an “additionality principle”, which requires that [...] Read more.

The “low indirect land use change risk” (“low ILUC-risk”) concept was developed to assess whether crop-based biofuels would compete with other land uses and cause the expansion of agricultural land. At the core of low ILUC-risk is an “additionality principle”, which requires that biofuel feedstock receive special treatment only if it is produced over and above the business-as-usual baseline. This paper examines and tests the European Commission’s methodology for calculating the baseline for yield improvement projects, by applying it to publicly available Eurostat data at national and NUTS2 scales. We assess from a statistical perspective how variation in regional yield trends would lead to differences in the long-term outcomes of low ILUC-risk certification; we conclude that, as currently designed, the methodology would over-state the amount of additional production in some cases and could hence incentivise the diversion of crops from other uses into the biofuel sector. We introduce the terms “tailwind additionality”, “headwind additionality”, and “additionality ratchet” to characterise the phenomena which contribute to this outcome. Our results lead us to recommendations which may enhance both the attractiveness and the robustness of the low ILUC-risk system. Full article

(This article belongs to the Special Issue Alternative Fuels for Transport: Recent Advances and Future Challenges)

► Show Figures

Figure 1

18 pages, 646 KiB

Open AccessFeature PaperArticle

Exploring the Antioxidant, Antidiabetic, and Antimicrobial Capacity of Phenolics from Blueberries and Sweet Cherries

by Ana C. Gonçalves, Ana R. Nunes, Sara Meirinho, Miguel Ayuso-Calles, Rocío Roca-Couso, Raúl Rivas, Amílcar Falcão, Gilberto Alves, Luís R. Silva and José David Flores-Félix

Appl. Sci. 2023, 13(10), 6348; https://doi.org/10.3390/app13106348 - 22 May 2023

Cited by 2 | Viewed by 1946

Abstract

(1) Background: Nowadays, special attention has been paid to red and purple fruits, including blueberries and sweet cherries, since they are highly attractive to consumers due to their organoleptic properties, standing out due to their vibrant red and purple colours and sweet flavour, [...] Read more.

(1) Background: Nowadays, special attention has been paid to red and purple fruits, including blueberries and sweet cherries, since they are highly attractive to consumers due to their organoleptic properties, standing out due to their vibrant red and purple colours and sweet flavour, and nutritional value. (2) Methods: The present study evaluated the phenolic profile of phenolic-enriched extracts from blueberries and sweet cherries and explored their antioxidant potential against DPPH, superoxide and nitric oxide radicals, and ferric species, and their potential to inhibit the α-glucosidase enzyme. Furthermore, their antimicrobial activity was also determined by microdilution method against four Gram-positive strains (Enterococcus faecalis ATCC 29212, Bacillus cereus ATCC 11778, Listeria monocytogenes LMG 16779, and Staphylococcus aureus ATCC 25923) and five Gram-negative strains (Salmonella enterica subsp. enterica ATCC 13311 serovar Typhimurium, Klebsiella pneumoniae ATCC 13883, Proteus mirabilis CECT 170, Serratia marcescens CECT 159, and Acinetobacter baumannii LMG 1025). (3) Results: By chromatographic techniques, eight anthocyanins were detected in blueberry coloured fraction and total extract, and five anthocyanins were detected in sweet cherry total extract and coloured fraction, while quercetin aglycone and chlorogenic acids were the dominant non-coloured compounds in blueberries and sweet cherries, respectively. All extracts demonstrated significant antioxidant properties, as well as the ability to inhibit the activity of α-glucosidase enzyme and the development of various microorganisms. (4) Conclusion: The obtained data evidence the promising biological potential of blueberries and sweet cherries, being highly correlated with the presence of phenolic compounds. Full article

(This article belongs to the Special Issue Antibacterial Activity of Plant Extracts)

► Show Figures

Figure 1

12 pages, 4330 KiB

Open AccessArticle

Centrifugal Model Study of Seepage and Seismic Behavior in a Homogeneous Reservoir Dam with Parapet

by Young-Hak Lee, Soichiro Yamakawa, Tetsuo Tobita, Hyuk-Kee Hong, Hyo-Sung Song, Jae-Jung Kim and Dal-Won Lee

Appl. Sci. 2023, 13(10), 6347; https://doi.org/10.3390/app13106347 - 22 May 2023

Viewed by 971

Abstract

This study examines the effectiveness of parapets in preventing overtopping failures of small-scale homogeneous reservoir dams under seismic loads. In this study, a parapet covered the entire width of the dam crest and was designed to ensure its weight is transmitted to the [...] Read more.

This study examines the effectiveness of parapets in preventing overtopping failures of small-scale homogeneous reservoir dams under seismic loads. In this study, a parapet covered the entire width of the dam crest and was designed to ensure its weight is transmitted to the dam crest. The test included four modes: initial mode, first seepage, seismic, and second seepage. The results show that without parapets the crack length and width expand significantly in the dam crest during the seismic mode, and the effect was large in the second seepage mode. The crack depth increased by 11.3–24 times during the seismic mode and expanded up to 73.3% of the dam height in the longitudinal direction along the axis of the crack formed in the dam crest during the second seepage mode. These findings suggest that the earthquake weakened the dam body, making it vulnerable to penetration. In contrast, the parapet structure effectively suppressed most of the tensile cracks by increasing the constraint force. Additionally, no crack expansion or tearing occurred during the second seepage mode post-earthquake, indicating improved seismic performance and suppression of seepage deformation. Full article

► Show Figures

Figure 1

18 pages, 899 KiB

Open AccessArticle

Behavioral Indicator-Based Initial Flight Training Competency Assessment Model

by Hong Sun, Fangquan Yang, Peiwen Zhang and Qingqing Hu

Appl. Sci. 2023, 13(10), 6346; https://doi.org/10.3390/app13106346 - 22 May 2023

Viewed by 1659

Abstract

Ensuring training safety is paramount to flight schools. In response to the inadequacy of traditional flight training assessment for comprehensive quantitative evaluation of cadet competency, an initial flight training competency assessment standard based on behavioral indicators was developed and optimized using the VENN [...] Read more.

Ensuring training safety is paramount to flight schools. In response to the inadequacy of traditional flight training assessment for comprehensive quantitative evaluation of cadet competency, an initial flight training competency assessment standard based on behavioral indicators was developed and optimized using the VENN model. Firstly, the Assessor Score Measurement Form (ASMF) was constructed according to the requirements of the Training Evaluation Worksheet specification, such as typical subjects, observations, and completion criteria. Secondly, based on the basic principles of the experience of the flight expert and the Competency-Based Training and Assessment (CBTA), a matrix of correlations between the observations and each competency-based behavioral indicator was created to construct a competency assessment matrix. In addition, a two-dimensional model for representing competency items characterized by behavioral indicators was established and an optimization model for competency assessment criteria was constructed. Finally, through combining actual flight training data, the proposed method was validated in the flight screening check phase. The results show that the optimized flight training competency assessment scheme can be well quantified and matched to real instructor ratings with an accuracy of 84%. The assessment worksheet, the assessment matrix, and the VENN competency rating model can be adapted to the different teaching requirements of each flight phase, achieving a perfect match between the behavioral indicators and the competency items, which is highly versatile. The proposed model can more accurately reflect the core competencies of flight trainees, enable quantitative assessment of behavioral indicators and competency items, and provide support for subsequent training of trainees. Full article

(This article belongs to the Special Issue Research on Aviation Safety)

► Show Figures

Figure 1

17 pages, 6935 KiB

Open AccessArticle

Center-to-Center Distance’s Effect between Vertical Square Tubes of a Horizontal Array on Natural Convection Heat Transfer

by Zeyad Alsuhaibani, Mohamed Ali and Nader S. Saleh

Appl. Sci. 2023, 13(10), 6345; https://doi.org/10.3390/app13106345 - 22 May 2023

Cited by 1 | Viewed by 1014

Abstract

An experimental study on natural convection heat transfer from the outer surface of a horizontal array of vertical square tubes in the air is investigated. The array consists of three vertical square tubes at equally different center-to-center distances. Each tube has a square [...] Read more.

An experimental study on natural convection heat transfer from the outer surface of a horizontal array of vertical square tubes in the air is investigated. The array consists of three vertical square tubes at equally different center-to-center distances. Each tube has a square cross-section with a side length of 2.00 cm, 100 cm length, and is filled with sand. Each tube is heated by inserting an internal heating element with a constant heat flux at the center. Five center-to-center separation distance to hydraulic diameter ratios (S/D) are used at different heat flux ranges of 70–360 W/m². Results show that at small S/D, the Nusselt number of any tube in the array is lower than that of the single tube up to a specific S/D and then increases as the ratio increases. Empirical correlations are obtained for each tube in the array at different S/D using the modified Rayleigh numbers only. General correlations using S/D as a parameter are obtained for each tube, and an overall general correlation using both S/D and the tube number (n) as parameters is obtained. The difference between the predicted and experimental Nusselt numbers is in the reasonable range even at high Rayleigh numbers. Full article

(This article belongs to the Topic Applied Heat Transfer)

► Show Figures

Figure 1

15 pages, 18063 KiB

Open AccessArticle

Geometric Error Parameterization of a CMM via Calibrated Hole Plate Archived Utilizing DCC Formatting

by Ming-Xian Lin and Tsung-Han Hsieh

Appl. Sci. 2023, 13(10), 6344; https://doi.org/10.3390/app13106344 - 22 May 2023

Cited by 1 | Viewed by 1214

Abstract

This study implemented the measurement results and administrative information obtained from the hole plate into the Digital Calibration Certificate (DCC). The DCC comprises three parts: Norms and Standards, Hierarchical Structure, and XML as Exchange Format. DCCs play a significant role in the field [...] Read more.

This study implemented the measurement results and administrative information obtained from the hole plate into the Digital Calibration Certificate (DCC). The DCC comprises three parts: Norms and Standards, Hierarchical Structure, and XML as Exchange Format. DCCs play a significant role in the field of metrology and statistics by ensuring data interoperability, correctness, and traceability during the conversion and transmission process. The hole plate is a length standard used for two-dimensional geometric error measurements. We evaluated the accuracy of the high-precision coordinate measuring machine (CMM) in measuring a hole plate and compared the measurement error results obtained from the hole plate with those of the laser interferometer, autocollimator, and angle square. The results show that the maximum difference in linear error is −0.30 μm, the maximum difference in angle error is −0.78″, and the maximum difference in squareness error is 4.54″. The XML is designed for machine-readability and is modeled and edited using the XMLSpy 2022 software, which is based on information published by PTB. The administrative management and measurement results tasks are presented in PDF format, which is designed for human-readability and ease of use. Overall, we implemented the measurement results and information obtained from the hole plate into the DCC. Full article

(This article belongs to the Topic Measurement Strategies and Standardization in Manufacturing)

► Show Figures

Figure 1

18 pages, 379 KiB

Open AccessArticle

Efficient Multi-Identity Full Homomorphic Encryption Scheme on Lattice

by Huifeng Fan, Ruwei Huang and Fengting Luo

Appl. Sci. 2023, 13(10), 6343; https://doi.org/10.3390/app13106343 - 22 May 2023

Cited by 1 | Viewed by 934

Abstract

Aiming at the problem that the fully homomorphic encryption scheme based on single identity cannot satisfy the homomorphic operation of ciphertext under different identities, as well as the inefficiency of trapdoor function and the complexity of sampling algorithm, an improved lattice MIBFHE scheme [...] Read more.

Aiming at the problem that the fully homomorphic encryption scheme based on single identity cannot satisfy the homomorphic operation of ciphertext under different identities, as well as the inefficiency of trapdoor function and the complexity of sampling algorithm, an improved lattice MIBFHE scheme was proposed. Firstly, we combined MP12 trapdoor function with dual LWE algorithm to construct a new IBE scheme under the standard model, and prove that the scheme is IND-sID-CPA security under the selective identity. Secondly, we used the eigenvector method to eliminate the evaluation key, and transform the above efficient IBE scheme into a single identity IBFHE scheme to satisfy the homomorphic operation. Finally, we improved the ciphertext extension method of CM15 and constructed a new Link-mask system that supports the transformation of IBFHE scheme under the standard model, and then, converted the above IBFHE scheme into MIBFHE scheme based on this system. The comparative analysis results showed that the efficiency of this scheme is improved compared with similar schemes in the trapdoor generation and preimage sampling, and the dimension of lattice and ciphertext size are significantly shortened. Full article

28 pages, 1917 KiB

Open AccessArticle

VSFCM: A Novel Viewpoint-Driven Subspace Fuzzy C-Means Algorithm

by Yiming Tang, Rui Chen and Bowen Xia

Appl. Sci. 2023, 13(10), 6342; https://doi.org/10.3390/app13106342 - 22 May 2023

Cited by 2 | Viewed by 999

Abstract

Nowadays, most fuzzy clustering algorithms are sensitive to the initialization results of clustering algorithms and have a weak ability to handle high-dimensional data. To solve these problems, we developed the viewpoint-driven subspace fuzzy c-means (VSFCM) algorithm. Firstly, we propose a new cut-off distance. [...] Read more.

Nowadays, most fuzzy clustering algorithms are sensitive to the initialization results of clustering algorithms and have a weak ability to handle high-dimensional data. To solve these problems, we developed the viewpoint-driven subspace fuzzy c-means (VSFCM) algorithm. Firstly, we propose a new cut-off distance. Based on this, we establish the cut-off distance-induced clustering initialization (CDCI) method and use it as a new strategy for cluster center initialization and viewpoint selection. Secondly, by taking the viewpoint obtained by CDCI as the entry point of knowledge, a new fuzzy clustering strategy driven by knowledge and data is formed. Based upon these, we put forward the VSFCM algorithm combined with viewpoints, separation terms, and subspace fuzzy feature weights. Moreover, compared with the symmetric weights obtained by other subspace clustering algorithms, the weights of the VSFCM algorithm exhibit significant asymmetry. That is, they assign greater weights to features that contribute more, which is validated on the artificial dataset DATA2 in the experimental section. The experimental results compared with multiple advanced clustering algorithms on the three types of datasets validate that the proposed VSFCM algorithm has the best performance in five indicators. It is demonstrated that the initialization method CDCI is more effective, the feature weight allocation of VSFCM is more consistent with the asymmetry of experimental data, and it can achieve better convergence speed while displaying better clustering efficiency. Full article

(This article belongs to the Special Issue Fuzzy Control Systems: Latest Advances and Prospects)

► Show Figures

Figure 1

17 pages, 6928 KiB

Open AccessArticle

Computational Dynamics of Multi-Rigid-Body System in Screw Coordinate

by Jing-Shan Zhao, Song-Tao Wei and Xiao-Cheng Sun

Appl. Sci. 2023, 13(10), 6341; https://doi.org/10.3390/app13106341 - 22 May 2023

Cited by 2 | Viewed by 1246

Abstract

This paper investigates the kinematics and dynamics of multi-rigid-body systems in screw form. The Newton–Euler dynamics equations are established in screw coordinates. All forces and torques of the multi-rigid-body system can be solved straightforwardly since they are explicit in the form of screw [...] Read more.

This paper investigates the kinematics and dynamics of multi-rigid-body systems in screw form. The Newton–Euler dynamics equations are established in screw coordinates. All forces and torques of the multi-rigid-body system can be solved straightforwardly since they are explicit in the form of screw coordinates. The displacement and acceleration are unified in matrix form, which associates the kinematics and dynamics with variable of velocity. A one-step numerical algorithm only is needed to solve the displacements and accelerations. As a result, all absolute displacements, velocities, and accelerations are directly obtained by one kinematic equation. The kinematics and dynamics of Gough–Stewart platform validate this the method. In this paper, the kinematics and dynamics are carried out with the example of a Gough–Stewart platform, which represents the most complex multi-rigid-body system, to verify the computational dynamics method. The proposed algorithm is also fit for the kinematics and dynamics modeling of other multi-rigid-body systems. Full article

► Show Figures

Figure 1

11 pages, 2499 KiB

Open AccessArticle

Valorization of Cassava By-Products: Cyanide Content and Quality Characteristics of Leaves and Peel

by Adnan Mukhtar, Sajid Latif, Ziba Barati and Joachim Müller

Appl. Sci. 2023, 13(10), 6340; https://doi.org/10.3390/app13106340 - 22 May 2023

Viewed by 1544

Abstract

Cassava production generates significant amounts of by-products such as leaves and tuber peel. Instead of considering them as waste, valorization aims to find sustainable ways to utilize them. However, the presence of cyanide and insoluble fibers poses a major obstacle to their conversion [...] Read more.

Cassava production generates significant amounts of by-products such as leaves and tuber peel. Instead of considering them as waste, valorization aims to find sustainable ways to utilize them. However, the presence of cyanide and insoluble fibers poses a major obstacle to their conversion into valuable products. Therefore, the objective of this study is to investigate the changes in cyanide concentration and quality of cassava leaves after mechanical pressing and in tuber peel after treatment with an enzyme solution. Frozen leaves were screw-pressed into their fractions: juice, and press cake. The results show that the cyanide level in the press cake was reduced to 73.56% and was concentrated by 97.48% in the juice compared to the frozen leaves. However, the crude protein values of the frozen leaves, juice, and press cake did not differ significantly (p > 0.05), and were 27.09%, 25.47%, and 23.82%, respectively. In addition, the results for the peel revealed that pretreatment with Viscozyme^® L, which assists in the mechanical peeling of cassava tubers, also contributed to a reduction in cyanide and insoluble fiber in the peel. Cyanide content was lowered by 53.89–58.94% in enzyme-treated peel from all three runs (ETP1-3) when compared to fresh peel (FP), while the reduction was only 8.63% in the control peel (CP) treated with hot water without enzyme solution. The insoluble fibers in cassava peel, such as neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL), and crude fiber (CF), were also degraded more effectively after treatment with an enzyme solution than with hot water. Full article

(This article belongs to the Special Issue Sustainable Reutilization of Agri-Food Byproducts: Bioactive Compounds)

► Show Figures

Figure 1

32 pages, 7857 KiB

Open AccessArticle

New Game Artificial Intelligence Tools for Virtual Mine on Unreal Engine

by Fares Abu-Abed and Sergey Zhironkin

Appl. Sci. 2023, 13(10), 6339; https://doi.org/10.3390/app13106339 - 22 May 2023

Cited by 5 | Viewed by 3197

Abstract

Currently, the gamification of virtual reality for training miners, especially for emergencies, and designing the extraction of minerals in difficult technological conditions has been embodied in the Virtual Mine software and hardware. From a software development point of view, Virtual Mine is indistinguishable [...] Read more.

Currently, the gamification of virtual reality for training miners, especially for emergencies, and designing the extraction of minerals in difficult technological conditions has been embodied in the Virtual Mine software and hardware. From a software development point of view, Virtual Mine is indistinguishable from other virtual reality games, and this offers a chance to use the potential of rapidly developing game software in mining, including engines, 3D modeling tools, audio editors, etc., to solve a wide range of game development tasks. The chosen direction will optimize the work of developers by providing a tool for developing game artificial intelligence to solve problems that require implementing the behavior of game agents without using a rigidly defined choice of scenarios or chains of these scenarios. The aim of the work is to expand the possibilities of working with game artificial intelligence on the Unreal Engine game engine to make it more functional. As a result, a tool has been obtained that can be used to optimize the time and improve the quality of the development of game artificial intelligence for Virtual Mine using flexible development approaches. The asset editor was developed, application modes and their working tabs were defined, and a graphical node system for the behavioral graph editor was created. A system for executing a behavioral graph is given; algorithms for its operation and features for executing nodes of a behavioral graph are presented. Full article

► Show Figures

Figure 1

12 pages, 4347 KiB

Open AccessArticle

Yb-Doped All-Fiber Amplifier with Low-Intensity Noise in mHz Range Oriented to Space-Borne Gravitational Wave Detection

by Zaiyuan Wang, Jiehao Wang, Fan Li, Yuhang Li, Long Tian and Qiang Liu

Appl. Sci. 2023, 13(10), 6338; https://doi.org/10.3390/app13106338 - 22 May 2023

Cited by 1 | Viewed by 1068

Abstract

We present a low-intensity noise single-frequency Yb-doped all-fiber amplifier oriented to space-borne gravitational wave detection. Relative intensity noise (RIN) below −70 dBc/Hz @ 1 mHz~1 Hz was achieved by virtue of feedback-loop-based intensity noise suppression. Based on systematic noise analysis and experimental investigation, [...] Read more.

We present a low-intensity noise single-frequency Yb-doped all-fiber amplifier oriented to space-borne gravitational wave detection. Relative intensity noise (RIN) below −70 dBc/Hz @ 1 mHz~1 Hz was achieved by virtue of feedback-loop-based intensity noise suppression. Based on systematic noise analysis and experimental investigation, we found that the pump noise and temperature-dependent noise of the fiber splitter and the photodetector contributed mainly to the RIN of the fiber amplifier. Therefore, we carefully designed a feedback-loop-based Yb-doped all-fiber amplifier, and finely stabilized the temperature of the pump diode, fiber splitters, and photodetectors. Consequently, the RIN can be suppressed down to −72.5 dBc/Hz around 1 mHz. This low-intensity all-fiber Yb-doped amplifier can be used for space-borne gravitational-wave detection. Full article

(This article belongs to the Special Issue Advances in Optical and Optoelectronic Devices and Systems)

► Show Figures

Figure 1

25 pages, 7418 KiB

Open AccessArticle

Application of Cluster Analysis for Classification of Vibration Signals from Drilling Stand Aggregates

by Patrik Flegner, Ján Kačur, Rebecca Frančáková, Milan Durdán and Marek Laciak

Appl. Sci. 2023, 13(10), 6337; https://doi.org/10.3390/app13106337 - 22 May 2023

Cited by 2 | Viewed by 861

Abstract

Rotary drilling technology with diamond tools is still essential in progressively extracting the earth’s resources. Since investigating the disintegration mechanism in actual conditions is very difficult, the practice must start with laboratory research. Identifying and classifying the drilling stand and its aggregates as [...] Read more.

Rotary drilling technology with diamond tools is still essential in progressively extracting the earth’s resources. Since investigating the disintegration mechanism in actual conditions is very difficult, the practice must start with laboratory research. Identifying and classifying the drilling stand and its aggregates as objects will contribute to the clarification of certain problems related to streamlining the process, optimizing the working regime, preventing emergencies, and reducing energy and economic demands. For these purposes, the cluster method was designed and applied. Applying the clustering method has a significant place in complex and dynamic processes. Eight vibration signals were measured and processed during the operation of the aggregates, such as the motor, pump, and hydrogenerator, with a sampling frequency of 18 kHz and a time interval of 30 s. Subsequently, 16 symptoms were designed and numerically calculated in the time and frequency domain, creating the symptom vector of the aggregate. The aim of the study and article was the classification of aggregates as objects into recognizable clusters. The results show that the strong symptoms include a measure of variability, variance in the signal, and kurtosis. The weak symptoms are skewness and the moment of the signal spectrum. Visualization in the symptom plane and space proved their influence on cluster formation. According to the cluster analysis results, six to seven clusters presenting the activity of the aggregates were classified. It was found that the boundaries between the clusters were not sharp. As part of the research, the centroids of clusters of aggregates and the distances between them were calculated. Classified clusters can rebuild reference clusters for objects with a similar character in a broader context. Full article

► Show Figures

Figure 1

14 pages, 4924 KiB

Open AccessArticle

Studying the Tribological Properties of Coffee Oil-Loaded Water-Based Green Lubricant

by Raimondas Kreivaitis, Milda Gumbytė, Artūras Kupčinskas, Jolanta Treinytė, Kiril Kazancev and Eglė Sendžikienė

Appl. Sci. 2023, 13(10), 6336; https://doi.org/10.3390/app13106336 - 22 May 2023

Viewed by 921

Abstract

Lubrication is the primary solution to reduce friction and wear. However, conventional lubricants cause pollution when not properly disposed of or due to accidental leaks. Therefore, environmentally friendly lubricating fluids are welcome in any application where they can meet the performance requirements. This [...] Read more.

Lubrication is the primary solution to reduce friction and wear. However, conventional lubricants cause pollution when not properly disposed of or due to accidental leaks. Therefore, environmentally friendly lubricating fluids are welcome in any application where they can meet the performance requirements. This study suggests using coffee oil produced from spent coffee grounds to improve the lubricity of water-based lubricating fluid. Bis(2-hydroxyethyl)ammonium oleate protic ionic liquid facilitates the dispersion of coffee oil in water. Kinematic viscosity, wettability, corrosion prevention, and lubricity tests were performed to evaluate the tribological properties provided by these additives. It was observed that a higher amount of coffee oil could be dispersed with the introduction of a higher amount of protic ionic liquid. In this study, ten wt.% of coffee oil was successfully dispersed using one wt.% of protic ionic liquid. Introducing additives increased dispersions’ viscosity, improved wettability, provided protection against corrosion, and reduced wear and friction. It was proposed that polar molecules of protic ionic liquid were responsible for most of the improvement, while coffee oil contributed by increasing viscosity. Further studies could be directed toward determining rational concentration to meet each particular application’s requirements. Full article

(This article belongs to the Special Issue Recent Trends in Biomass Materials)

► Show Figures

Figure 1

18 pages, 5159 KiB

Open AccessArticle

Performance and Modification Mechanism of Recycled Glass Fiber of Wind Turbine Blades and SBS Composite-Modified Asphalt

by Yihua Nie, Qing Liu, Zhiheng Xiang, Shixiong Zhong and Xinyao Huang

Appl. Sci. 2023, 13(10), 6335; https://doi.org/10.3390/app13106335 - 22 May 2023

Cited by 3 | Viewed by 1355

Abstract

Efficient disposal of composite materials recycled from wind turbine blades (WTB) at end-of-life needs to be solved urgently. To investigate the modification effects and mechanism on SBS-modified asphalt of the recycled glass fiber (GF) from WTB, GF-WTB/SBS composite-modified asphalt was prepared. Dynamic shear [...] Read more.

Efficient disposal of composite materials recycled from wind turbine blades (WTB) at end-of-life needs to be solved urgently. To investigate the modification effects and mechanism on SBS-modified asphalt of the recycled glass fiber (GF) from WTB, GF-WTB/SBS composite-modified asphalt was prepared. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) were adopted to evaluate its performance. FTIR, SEM, EDS, and AFM methods were used to assess coupling agent pretreatment effects on GF-WTB and observe the modification mechanism. The macroscopic tests show that reasonable addition of GF-WTB effectively raises the high-temperature performance and low-temperature crack resistance evaluation index k-value of SBS-modified asphalt, and the optimal content is 2 wt% GF-WTB with 4 wt% SBS. FTIR, SEM, and EDS tests show GF-WTB can be successfully grafted by UP152 coupling agent and show that adhesion of the GF-WTB to the SBS-modified asphalt can be improved. AFM observation shows SBS and GF-WTB have good compatibility, improving the asphalt elasticity and toughness. This study provides a feasible solution for environmentally friendly regeneration of the composite materials from WTB and contributes to the development of the secondary modifier of SBS-modified asphalt. Full article

(This article belongs to the Special Issue New Trends in Long-Life Road Infrastructures: Materials and Structures)

► Show Figures

Figure 1

21 pages, 9854 KiB

Open AccessArticle

Calculation Method of Loose Pressure in Surrounding Rock Mass

by Hongjie Gao, Weibin Ma, Wenhao Zou, Jinlong Zhang, Xinyu Li and Jiaqiang Han

Appl. Sci. 2023, 13(10), 6334; https://doi.org/10.3390/app13106334 - 22 May 2023

Cited by 1 | Viewed by 940

Abstract

With the implementation of the regional coordinated development strategy, traffic flow has grown explosively. The construction of a larger tunnel section becomes an effective way to solve the highway network’s insufficient transport capability problem. Currently, there is little research on the factors influencing [...] Read more.

With the implementation of the regional coordinated development strategy, traffic flow has grown explosively. The construction of a larger tunnel section becomes an effective way to solve the highway network’s insufficient transport capability problem. Currently, there is little research on the factors influencing and methods of calculating the loose pressure in the surrounding rock mass for highway tunnels with super-large cross-sections. Based on the Bifurcation Tunnel, which is one of the sign projects in the past five years, this paper discusses the influencing factors for the range of loose zone in deeply buried tunnels using a combination of a numerical analysis and an orthogonal test. The weight of influencing factors is calculated via an efficiency evaluation method. This paper establishes a limit analysis model of the loose pressure in the surrounding rock mass under a non-linear failure criterion based on the fitted boundary function and upper bound limit analysis method and deduces the correlations of the loose pressure. The distribution law of the loose pressure, obtained via the limit analysis method, is consistent with the pressure-monitoring results, verifying the correctness of the proposed calculation method. This study can provide a calculation basis for the design of a supporting structure and the selection of similar super-section tunnel projects. Full article

(This article belongs to the Special Issue Advances in Tunnel and Underground Construction)

► Show Figures

Figure 1

16 pages, 1531 KiB

Open AccessArticle

Steady-State Crack Growth in Nanostructured Quasi-Brittle Materials Governed by Second Gradient Elastodynamics

by Yury Solyaev

Appl. Sci. 2023, 13(10), 6333; https://doi.org/10.3390/app13106333 - 22 May 2023

Cited by 1 | Viewed by 819

Abstract

The elastodynamic stress field near a crack tip propagating at a constant speed in isotropic quasi-brittle material was investigated, taking into account the strain gradient and inertia gradient effects. An asymptotic solution for a steady-state Mode-I crack was developed within the simplified strain [...] Read more.

The elastodynamic stress field near a crack tip propagating at a constant speed in isotropic quasi-brittle material was investigated, taking into account the strain gradient and inertia gradient effects. An asymptotic solution for a steady-state Mode-I crack was developed within the simplified strain gradient elasticity by using a representation of the general solution in terms of Lamé potentials in the moving framework. It was shown that the derived solution predicts the nonsingular stress state and smooth opening profile for the growing cracks that can be related to the presence of the fracture process zone in the micro-/nanostructured quasi-brittle materials. Note that similar asymptotic solutions have been derived previously only for Mode-III cracks (under antiplane shear loading). Thus, the aim of this study is to show the possibility of analytical assessments on the elastodynamic crack tip fields for in-plane loading within gradient theories. By using the derived solution, we also performed analysis of the angular distribution of stresses and tractions for the moderate speed of cracks. It was shown that the usage of the maximum principal stress criterion within second gradient elastodynamics allows us to describe a directional stability of Mode-I crack growth and an increase in the dynamic fracture toughness with the crack propagation speed that were observed in the experiments with quasi-brittle materials. Therefore, the possibility of the effective application of regularized solutions of strain gradient elasticity for the refined analysis of dynamic fracture processes in the quasi-brittle materials with phenomenological assessments on the cohesive zone effects is shown. Full article

(This article belongs to the Special Issue Novel Nanomaterials and Nanostructures)

► Show Figures

Figure 1

17 pages, 5626 KiB

Open AccessArticle

Decision-Refillable-Based Shared Feature-Guided Fuzzy Classification for Personal Thermal Comfort

by Zhaofei Xu, Weidong Lu, Zhenyu Hu, Wei Yan, Wei Xue, Ta Zhou and Feifei Jiang

Appl. Sci. 2023, 13(10), 6332; https://doi.org/10.3390/app13106332 - 22 May 2023

Viewed by 848

Abstract

Different types of buildings in different climate zones have their own design specifications and specific user populations. Generally speaking, these populations have similar sensory feedbacks in their perception of environmental thermal comfort. Existing thermal comfort models do not incorporate personal thermal comfort models [...] Read more.

Different types of buildings in different climate zones have their own design specifications and specific user populations. Generally speaking, these populations have similar sensory feedbacks in their perception of environmental thermal comfort. Existing thermal comfort models do not incorporate personal thermal comfort models for specific populations. In terms of an algorithm, the existing work constructs machine learning models based on an established human thermal comfort database with variables such as indoor temperature, clothing insulation, et al., and has achieved satisfactory classification results. More importantly, such thermal comfort models often lack scientific interpretability. Therefore, this study selected a specific population as the research object, adopted the 0-order Takagi–Sugeno–Kang (TSK) fuzzy classifier as the base training unit, and constructed a shared feature-guided new TSK fuzzy classification algorithm with extra feature compensation (SFG-TFC) to explore the perception features of the population in the thermal environment of buildings and to improve the classification performance and interpretability of the model. First, the shared features of subdatasets collected in different time periods were extracted. Second, the extra features of each subdataset were independently trained, and the rule outputs corresponding to the key shared features were reprojected into the corresponding fuzzy classifiers. This strategy not only highlights the guiding role of shared features but also considers the important compensation effect of extra features; thereby, improving the classification performance of the entire classification model. Finally, the least learning machine (LLM) was used to solve the parameters of the “then” part of each basic training unit, and these output weights were integrated to enhance the generalization performance of the model. The experimental results demonstrate that SFG-TFC has better classification performance and interpretability than the classic nonfuzzy algorithms support vector machine (SVM) and deep belief network (DBN), the 0-order TSK, and the multilevel optimization and fuzzy approximation algorithm QI-TSK. Full article

► Show Figures

Figure 1

16 pages, 1576 KiB

Open AccessFeature PaperArticle

Detecting Fake Reviews in Google Maps—A Case Study

by Paweł Gryka and Artur Janicki

Appl. Sci. 2023, 13(10), 6331; https://doi.org/10.3390/app13106331 - 22 May 2023

Cited by 1 | Viewed by 2726

Abstract

Many customers rely on online reviews to make an informed decision about purchasing products and services. Unfortunately, fake reviews, which can mislead customers, are increasingly common. Therefore, there is a growing need for effective methods of detection. In this article, we present a [...] Read more.

Many customers rely on online reviews to make an informed decision about purchasing products and services. Unfortunately, fake reviews, which can mislead customers, are increasingly common. Therefore, there is a growing need for effective methods of detection. In this article, we present a case study showing research aimed at recognizing fake reviews in Google Maps places in Poland. First, we describe a method of construction and validation of a dataset, named GMR–PL (Google Maps Reviews—Polish), containing a selection of 18 thousand fake and genuine reviews in Polish. Next, we show how we used this dataset to train machine learning models to detect fake reviews and the accounts that published them. We also propose a novel metric for measuring the typicality of an account name and a metric for measuring the geographical dispersion of reviewed places. Initial recognition results were promising: we achieved an F1 score of

0.92

and

0.74

when detecting fake accounts and reviews, respectively. We believe that our experience will help in creating real-life review datasets for other languages and, in turn, will help in research aimed at the detection of fake reviews on the Internet. Full article

(This article belongs to the Special Issue Signal, Multimedia, and Text Processing in Cybersecurity Context)

► Show Figures

Figure 1

21 pages, 5147 KiB

Open AccessArticle

Surface Damage Identification of Wind Turbine Blade Based on Improved Lightweight Asymmetric Convolutional Neural Network

by Li Zou, Haowen Cheng and Qianhui Sun

Appl. Sci. 2023, 13(10), 6330; https://doi.org/10.3390/app13106330 - 22 May 2023

Cited by 3 | Viewed by 1092

Abstract

Wind turbine blades are readily damaged by the workplace environment and frequently experience flaws such as surface peeling and cracking. To address the problems of cumbersome operation, high cost, and harsh application conditions with traditional damage identification methods, and to cater to the [...] Read more.

Wind turbine blades are readily damaged by the workplace environment and frequently experience flaws such as surface peeling and cracking. To address the problems of cumbersome operation, high cost, and harsh application conditions with traditional damage identification methods, and to cater to the wide application of mobile terminal devices such as unmanned aerial vehicles, a novel lightweight asymmetric convolution neural network is proposed. The network introduces a lightweight asymmetric convolution module based on the improved asymmetric convolution, which applies depthwise separable convolution and channel shuffle to ensure efficient feature extraction capability while achieving a lightweight design. An enhanced Convolutional Block Attention Module (CBAM) embedded with a spatial attention module with a selective kernel, enhances the acquisition of spatial locations of damage features by combining multi-scale feature information. Experiments are carried out to verify the efficacy and the generalizability of the network proposed for the recognition task. A comparison experiment of common lightweight networks based on transfer learning is also conducted. The experimental results show that the lightweight network proposed in this article has better experimental metrics, including 99.94% accuracy, 99.88% recall, and 99.92% precision. Full article

► Show Figures

Figure 1

18 pages, 9957 KiB

Open AccessArticle

Numerical and Analytical Analysis of the Low-Frequency Magnetic Fields Generated by Three-Phase Underground Power Cables with Solid Bonding

by Eduard Lunca, Silviu Vornicu and Alexandru Sălceanu

Appl. Sci. 2023, 13(10), 6328; https://doi.org/10.3390/app13106328 - 22 May 2023

Viewed by 1426

Abstract

There is a special concern for measuring and simulating low-frequency magnetic fields generated by underground power cables, particularly in human exposure studies. In the present study, an accurate 2D finite element model for computing magnetic fields generated by three-phase underground power cables with [...] Read more.

There is a special concern for measuring and simulating low-frequency magnetic fields generated by underground power cables, particularly in human exposure studies. In the present study, an accurate 2D finite element model for computing magnetic fields generated by three-phase underground power cables with solid bonding is proposed. The model is developed in ANSYS Maxwell 2D low-frequency electromagnetic field simulation software for a typical 12/20 kV (medium-voltage) three-phase underground power cable in both trefoil and flat formations, but it can be adapted to any cable system. Model validation is achieved by analytical computations conducted with a software tool based on the Biot–Savart law and the superposition principle. RMS magnetic flux density profiles calculated at various heights above the ground with these two methods correlate very well. This is also true for induced shield currents. The application of the finite element model to multiple three-phase power cables laid together is also considered. Full article

► Show Figures

Figure 1

16 pages, 2063 KiB

Open AccessArticle

Fast, Lightweight, and Efficient Cybersecurity Optimization for Tactical–Operational Management

by Manuel Domínguez-Dorado, David Cortés-Polo, Javier Carmona-Murillo, Francisco J. Rodríguez-Pérez and Jesús Galeano-Brajones

Appl. Sci. 2023, 13(10), 6327; https://doi.org/10.3390/app13106327 - 22 May 2023

Cited by 3 | Viewed by 1142

Abstract

The increase in frequency and complexity of cyberattacks has heightened concerns regarding cybersecurity and created an urgent need for organizations to take action. To effectively address this challenge, a comprehensive and integrated approach is required involving a cross-functional cybersecurity workforce that spans tactical [...] Read more.

The increase in frequency and complexity of cyberattacks has heightened concerns regarding cybersecurity and created an urgent need for organizations to take action. To effectively address this challenge, a comprehensive and integrated approach is required involving a cross-functional cybersecurity workforce that spans tactical and operational levels. In this context there can be various combinations of cybersecurity actions that affect different functional domains and that allow for meeting the established requirements. In these cases, agreement will be needed, but finding high-quality combinations requires analysis from all perspectives on a case-by-case basis. With a large number of cybersecurity factors to consider, the size of the search space of potential combinations becomes unmanageable without automation. To solve this issue, we propose Fast, Lightweight, and Efficient Cybersecurity Optimization (FLECO), an adaptive, constrained, and multi-objective genetic algorithm that reduces the time required to identify sets of high-quality cybersecurity actions. FLECO enables productive discussions on viable solutions by the cross-functional cybersecurity workforce within an organization, fostering managing meetings where decisions are taken and boosting the overall cybersecurity management process. Our proposal is novel in its application of evolutionary computing to solve a managerial issue in cybersecurity and enhance the tactical–operational cybersecurity management process. Full article

(This article belongs to the Section Computing and Artificial Intelligence)

► Show Figures

Figure 1

14 pages, 3213 KiB

Open AccessArticle

Toward Low Time Fragmentation of Equipment: A Double-DQN Based TT&C Task Planning Approach

by Hangkun Xu and Runzi Liu

Appl. Sci. 2023, 13(10), 6326; https://doi.org/10.3390/app13106326 - 22 May 2023

Viewed by 811

Abstract

With the increase of the number of satellites in space, satellite tracking, telemetry, and command (TT&C) is becoming more and more important for aerospace. This paper proposes a method for a low time fragmentation oriented. TT&C task planning method based on Double Deep [...] Read more.

With the increase of the number of satellites in space, satellite tracking, telemetry, and command (TT&C) is becoming more and more important for aerospace. This paper proposes a method for a low time fragmentation oriented. TT&C task planning method based on Double Deep Q-Network (DDQN). This method mainly solves the problem of poor responses to emergency tasks caused by the large amount of time fragments of equipment under traditional TT&C task-planning methods. Firstly, a multi-objective optimization model aiming at minimizing time fragments and maximizing task revenue is formulated. Then, according to the conflict characteristics of tasks, a task-planning conflict graph is proposed, based on which a TT&C task-planning problem is transferred into an independent set problem. Finally, DDQN is combined with graph structure embedding to solve the transferred independent set problem. The experimental results demonstrate that the proposed method reduces the time fragment of TT&C equipment by 32% and shortens the response time of emergency tasks by 36% compared to existing methods. Full article

► Show Figures

Figure 1

22 pages, 7882 KiB

Open AccessArticle

“Migrate-Transfer-Control” Support System of Surrounding Rock in the Deep Roadway and Its Application

by Tao Qin, Binyang Duan, Yanwei Duan, Yaozu Ni, Xiangang Hou, Pingyun Ma and Yue Yang

Appl. Sci. 2023, 13(10), 6325; https://doi.org/10.3390/app13106325 - 22 May 2023

Cited by 2 | Viewed by 674

Abstract

After coal mining enters the deep, the mining environment changes dramatically, and engineering disasters become increasingly prominent, which are mostly related to rock instability and failure. As traditional support is difficult to meet production needs, it is necessary to improve the support system. [...] Read more.

After coal mining enters the deep, the mining environment changes dramatically, and engineering disasters become increasingly prominent, which are mostly related to rock instability and failure. As traditional support is difficult to meet production needs, it is necessary to improve the support system. Based on the engineering background of the Pinggang mining roadway, this work studies the migration law of overlying strata in deep goaf by theoretical analysis and numerical simulation. The results show that the vertical stress and plastic failure range of the surrounding rock in front of the working face increase with the advance distance and when the working face advances to the first square, reaching the maximum. A stope spatial model considering the influence of horizontal stress is established. Combined with the theory of key strata, the stress transfer characteristics of overlying strata are analyzed. It can be seen that 0~30 m in front of the coal wall of the working face is the influence range of advanced abutment pressure, and the dynamic mining pressure in this range has a great influence. The inclined direction of the working face, 0~20 m away from the coal wall of the roadway, is the influence range of the solid coal abutment pressure. On this basis, the “migration- transfer- control” technical system of surrounding rock in deep stope face is put forward, i.e., the stress transfer of surrounding rock is caused by overlying rock migration, and the large deformation of surrounding rock is controlled by supporting means. Based on the original support scheme of the roadway, three reinforcement schemes are designed for the roof, the sidewalls, and both the roof and sides. The deformation control effect of the reinforcement scheme is far greater than that of the single factor, and the field monitoring effect is good. The research results aim to provide theoretical and technical support for the deformation control of mining roadways in the deep mining process. Full article

(This article belongs to the Special Issue Advanced Analysis, Early-Warning and Control Method for Rock Engineering)

► Show Figures

Figure 1

21 pages, 702 KiB

Open AccessArticle

Multiview Fusion Using Transformer Model for Recommender Systems: Integrating the Utility Matrix and Textual Sources

by Thi-Linh Ho, Anh-Cuong Le and Dinh-Hong Vu

Appl. Sci. 2023, 13(10), 6324; https://doi.org/10.3390/app13106324 - 22 May 2023

Cited by 2 | Viewed by 1334

Abstract

Recommender systems are challenged with providing accurate recommendations that meet the diverse preferences of users. The main information sources for these systems are the utility matrix and textual sources, such as item descriptions, users’ reviews, and users’ profiles. Incorporating diverse sources of information [...] Read more.

Recommender systems are challenged with providing accurate recommendations that meet the diverse preferences of users. The main information sources for these systems are the utility matrix and textual sources, such as item descriptions, users’ reviews, and users’ profiles. Incorporating diverse sources of information is a reasonable approach to improving recommendation accuracy. However, most studies primarily use the utility matrix, and when they use textual sources they do not integrate them with the utility matrix. This is due to the risk of combined information causing noise and reducing the effectiveness of good sources. To overcome this challenge, in this study we propose a novel method that utilizes the Transformer Model, a deep learning model that efficiently integrates textual and utility matrix information. The study suggests feature extraction techniques suitable for each information source and an effective integration method in the Transformer model. The experimental results indicate that the proposed model significantly improves recommendation accuracy compared to the baseline model (MLP) for the Mean Absolute Error (MAE) metric, with a reduction range of 10.79% to 31.03% for the Amazon sub-datasets. Furthermore, when compared to SVD, which is known as one of the most efficient models for recommender systems, the proposed model shows a decrease in the MAE metric by a range of 34.82% to 56.17% for the Amazon sub-datasets. Our proposed model also outperforms the graph-based model with an increase of up to 108% in Precision, a decrease of up to 65.37% in MAE, and a decrease of up to 59.24% in RMSE. Additionally, experimental results on the Movielens and Amazon datasets also demonstrate that our proposed model, which combines information from the utility matrix and textual sources, yields better results compared to using only information from the utility matrix. Full article

(This article belongs to the Section Computing and Artificial Intelligence)

► Show Figures

Figure 1

Journal Menu

Journal Browser

Appl. Sci., Volume 13, Issue 10 (May-2 2023) – 532 articles

Further Information

Guidelines

MDPI Initiatives

Follow MDPI