Next Article in Journal
Investigation of the Influence of Design Parameters on the Strength of Steel–Concrete Composite Shear Walls by Finite Element Simulations
Previous Article in Journal
Development of a Low-pH Concrete Intended for Deep Geological Repository for Radioactive Waste
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Application of Ultra-High-Performance Concrete in Bridge Engineering: Current Status, Limitations, Challenges, and Future Prospects

1
Department of Civil Engineering, College of Engineering, University of Duhok, Duhok 42001, Iraq
2
Department of Civil Engineering, College of Engineering, Nawroz University, Duhok 42001, Iraq
3
Department of Civil Engineering, Faculty of Engineering, Kafrelsheikh University, Kafrelsheikh 33516, Egypt
4
Civil and Architectural Constructions Department, Faculty of Technology and Education, Suze University, Suez 41522, Egypt
5
Technical Institute of Babylon, Al-Furat Al-Awsat Technical University, Babylon 51015, Iraq
6
Department of Civil Engineering, College of Engineering, King Saud University, Riyadh 11451, Saudi Arabia
7
Department of Civil Engineering, Necmettin Erbakan University, Konya 42090, Turkey
8
School of Civil and Environmental Engineering, University of Technology Sydney (UTS), Sydney 2007, Australia
*
Author to whom correspondence should be addressed.
Buildings 2023, 13(1), 185; https://doi.org/10.3390/buildings13010185
Submission received: 13 December 2022 / Revised: 1 January 2023 / Accepted: 7 January 2023 / Published: 10 January 2023
(This article belongs to the Section Building Materials, and Repair & Renovation)

Abstract

:
Ultra-high-performance concrete (UHPC) is a form of cementitious composite that has been the most innovative product in concrete technology over the last three decades. Ultra-high-performance concrete has been broadly employed for the design of numerous forms of construction owing to its excellent mechanical characteristics and durability, and studies on its behavior have grown fast in the last decades. While the utilization of ultra-high-performance concrete in bridge engineering (BE) is limited owing to its high costs, little is recognized about the utilization of UHPC in various BE elements. As a result of these issues, a comprehensive review of the current UHPC development trends should be conducted to determine its present state and perspective. This study presents a review of the state-of-the-art UHPC applications in BE. This review also discusses the current status, limitations, challenges, and areas for the further investigation of UHPC in BE. The aim of this research to help various construction stakeholders understand the distinctive characteristics, benefits, and barriers to the broad utilization of ultra-high-performance concrete applications. The understanding of UHPC will aid in increasing its entire market share in both the national and worldwide building sectors.

1. Introduction

Ultra-high-performance concrete (UHPC) is an improved cementitious and fibrous concrete with high compressive strength (CS) (120–250 MPa) [1], tensile strength (15–20 MPa) [2], particle packing density (0.825–0.855) [3], and exceptional durability [4]. UHPC has three hundred times the energy absorption and ductility of high-performance concrete and three to sixteen times the compressive strength of normal concrete [5]. Owing to its excellent toughness and ductility under strain, as well as its remarkable mechanical characteristics, UHPC is often recognized as the material of choice for seismic design reasons [6]. UHPC is a viable alternative for improving infrastructure and the long-term viability of construction facilities [7].
Ultra-high-performance concrete is prepared with a low w/c ratio, often between 0.15 and 0.25 [8]. Owing to the low water volume, high-range water reducer agents are necessary to enhance the packing of the particles in the composite material, leading to a higher workability and fluidity of the mix [9]. As cementitious binders, PC and silica fume are often employed in UHPC production scenarios [10]. The worldwide ultra-high-performance concrete market is predicted to increase at a multifactor yearly growth rate of nearly seven percent between 2018 and 2022, as shown in Figure 1. As the high greenhouse gas inventory of PC has become a global issue, the need for more sustainable cementing binders has advanced significantly [11,12,13].
The mechanical characteristics of UHPC make it an ideal material for applications (apps) where strength is a fundamental design objective, and concrete structural component sizes can be reduced to make them thinner, smaller, and more visually appealing [14,15]. It is typically made up of PC, silica fume, fine aggregate, a higher-range water-reducing ingredient, and fibers. UHPC could be an appropriate material for concrete structures exposed to harsh environments [16]. UHPC is commonly employed in ultra-high-rise buildings, BE design, and long-span structures [17]. In harsh climate exposure or outdoor conditions, UHPC reduces service cycles, and the enhanced durability and longevity extends the lifecycle [18]. By utilizing synthetic fibers in UHPC, it is feasible to attain ultra-high CS and high tensile ductility in concrete materials [15,19]. Although UHPC progress and tech have been comprehensively studied and recognized from the micro- to the macro-level, its wide marketing remains difficult due to the high costs and complicated production process [12,20,21,22]. The problematic production process is mostly because of the usage of too many components, which leads to high prices and difficult handling. UHPC tech provides a different product that allows infrastructure developers to broaden their service offerings and product [4]. This tech’s main concept is the introduction of systematic ways to solve the inherent shortcomings in traditional concrete; for example, one of the sustainable ways to produce UHPC can be performed using geopolymer technology [23,24]. This innovative concrete is superior since it is more ductile, with a high capability to deform and support flexural and tensile loads even after initial cracking forms [25,26,27,28]. UHPC’s improved performance characteristics are the consequence of the improved bonding optimization and mineral matrix microstructural characteristics among the concrete matrix elements [29,30].
Since its inception more than two decades ago, UHPC has attracted increasing attention from the construction industry, with attention on the following: construction BEs [31], damaged concrete components [32], skyscrapers, unique architectural designs [33], offshore constructions, facilities related to the oil and gas industry apps [34], vertical elements (for instance, windmill towers and wind turbines) [7], overlay materials [35], and hydraulic structures [36]. UHPC is widely utilized in all of these industries, as well as road and BE construction [16]. UHPC is especially well suited for BE construction in difficult situations since its composites need less repair throughout their lifecycle and have excellent strength [37]. Ultra-high-performance concrete is also a preferred strategy for BE construction in high-traffic locations since it supports stronger and longer spans, leading to more usable space. However, the quality of the materials utilized and the accuracy with which they are produced have a considerable impact on the functioning of ultra-high-performance concrete [38]. Another factor that leads to carbon dioxide emissions is the high cement volume of ultra-high-performance concrete, which raises ecological concerns [3,39,40,41,42]. As a cement substitute, SF with fillers (for example, limestone and quartz powder) can substantially increase the workability of ultra-high-performance, fiber-reinforced concrete and the efficacy of the steel fibers in the material [43]. Moreover, fillers can lower the volume of the microsilica needed, which is essential for ultra-high-performance, fiber-reinforced concrete in terms of energy, costs, and ecological effect [43]. As SF has a broad-range of chemical and physical characteristics, depending on its source, more standardization and study are required [43,44].
Furthermore, UHPC provides a diverse product range that can be employed in big projects and infrastructure, including highways, federal roads, BEs, marine facilities, water conservation facilities, pre-cast buildings, and military facilities [45]. As several service infrastructures and facilities around the world deteriorate, innovative UHPC strategies, such as prefabricated BE components [46], UHPC BE overlays, seismic columns [47], piles [48], BE girders [49], link slabs [50], cladding [51], and waffle deck panels [52], are achieving acceptance and popularity in the construction industry. Owing to UHPC’s advanced progress, architects and designers can now introduce structural and decorative punctured facades in mesh designs or lattice styles, ultrathin [53], lightweight panels [31], and full facades with multifaceted forms, textures, curvatures, and puncture levels exceeding 50 percent [25]. This substantial advancement seems to be limited, though, by a lack of knowledge of the manufacturing processes and raw materials, the restricted design codes, and the high production costs [54].
Nonetheless, the usage of UHPC as a prospective and novel material is earning traction across a wide range of stakeholders, including scientists and construction companies [49]. Nevertheless, numerous hurdles limit the widespread utilization of UHPC. Some examples include significant spalling and shrinkage strains, large volume production techniques with limited workability, and undetermined durability following the progress of long-term concrete cracks [55,56,57]. Because of a lack of knowledge in the industry, ultra-high-performance concrete experts confront extra hurdles in imparting hands-on expertise to concrete industry professionals so that they can be well versed in the implementation of complex concrete techniques [58].
The aim of this review is to critically analyze the previous investigations on the utilization of UHPC in BE, as well as the present challenges restricting its broad adoption. Knowledge gaps have been found, as have the investigation needs. A study of the state of knowledge is essential since the investigation of UHPC involves a grasp of concrete materials science as well as structural and BE ideas. This review can assist scientists, designers, and practitioners in expanding the usage of ultra-high-performance concretes in advanced apps.
Figure 1. Global UHPC Market [59].
Figure 1. Global UHPC Market [59].
Buildings 13 00185 g001

Development of UHPC

Concrete is the world’s most frequently utilized human-made product, and it will carry on being highly popular in the near future. The world’s manufacture of concrete is expected to be over six bcm/year, with China currently accounting for almost 40 percent of global concrete manufacturing [60,61]. Concrete’s outstanding characteristics, including its durability and strength, low costs, and capacity to be poured into different shapes, have made it the most well-known and important construction material. Concrete is often utilized owing to its strong CS [62,63]. Substantial progress has been achieved in the area of concrete construction during the last several years. In the 1930s, significant scientific efforts to enhance concrete CS started [64,65,66,67].
During the 1960s, concrete tech evolved slowly, with maximum CSs varying from 15 MPa to 20 MPa. Concrete’s CS grew from 45 MPa to 60 MPa over a ten-year period. Because of the technical obstacle of the present water reducer, concrete strength peaked at roughly 60 MPa in the early 1970s. The present water reducer was unable to further lower the w/b ratio at the time [68,69]. It was found in the 1980s that high-range water reducers, known as superplasticizers, could be utilized to progressively lower the w/b to 0.30. Lowering the w/b below 0.16 was supposed to be unlawful until Bache [70] demonstrated that it was possible to do so with large dosages of silica fume and superplasticizers. A concrete CS of up to 280 MPa was attained by utilizing compacted granular materials by regulating the grain size distribution of the granular skeleton. As a consequence, a material with the fewest flaws, such as interconnected pore spaces and micro-fractures, was advanced to attain maximum durability and strength.
These technical breakthroughs, together with a fundamental understanding of low porous materials, have led to the formation of ultra-high-performance Portland composition materials with enhanced mechanical properties. Usually, the progress of UHPCs can be categorized into four stages: before the 1980s, after the 1980s, after the 1990s, and after the 2000s. Moreover, Figure 2 presents a summary of the historical progress patterns of UHPC.
Due to a lack of the current tech prior to the 1980s, UHPC production was restricted to the lab and needed specialized techniques such as heat curing and vacuum mixing. During this time, scientists experimented with several methods to produce more compact and denser concrete in order to boost its strength. Vacuum mixing coupled with temperature curing has been shown to raise the CS of concrete to 510 MPa [71,72]. Although a high CS of concrete was obtained, the preparation was energy-intensive and time-consuming [73,74,75,76].
In the early 1980s, microdefect-free cement was advanced [77]. In the microdefect-free cement process, polymers are employed to seal the pores and eliminate any flaws in the cement paste. Specific production conditions, such as the material being laminated by passing it through rollers, are required for this technique. Microdefect-free cement concrete has a CS of 200 MPa. Nevertheless, its apps have been restricted owing to the complicated preparation procedure, the high costs of the raw ingredients, the brittleness, and the substantial creep [77]. Following the launch of microdefect-free cement, Bache [70] advanced dense silica particle cement (dense silica particle cement). Dense silica particle cement, unlike microdefect-free cement, does not need rigorous manufacturing conditions to be produced. Dense silica particle cement faults were eliminated by increasing the particle packing density. Dense silica particle cement concrete is cured with pressure and heat and has a high concentration of SF and SP. Dense silica particle cement has a maximum CS of 345 MPa. These materials grow increasingly brittle as their ultra-high strength increases. Steel fibers were added to dense silica particle cement concretes in the 1980s to assist in enhancing their brittleness. This form of steel fiber-augmented concrete is a completely different material. It possesses ultra-high strength, a very thick microstructure, excellent ductility, and excellent durability. Slurry-infiltrated fiber concrete (SIFCON) and compact reinforced composites (CRC) are two significant instances of what transpired immediately after dense silica particle cement. Both slurry-infiltrated fiber concrete and compact reinforced composites offer remarkable durability and mechanical characteristics. Nevertheless, both slurry-infiltrated fiber concrete and compact reinforced composite slurry-infiltrated fiber concrete have workability issues that limit in situ implementations due to a lack of efficient high-range water reducers [78,79].
In the 1990s, Richard and Cheyrezy [80] utilized components with reactivity to produce reactive powder concrete (RPC) and higher fineness via thermal treatment. Reactive powder concrete is a key advancement in the progress of UHPCs. Its idea depended on the very dense arrangement of numerous particles. Reactive powder concrete is the most often utilized kind of UHPC in the field and laboratory experiments owing to its very high cement content, high binder concentration, extraordinarily low water-to-cement ratio, and utilization of fine quartz powder, SF, SP, quartz sand, and steel fibers [42]. To increase the matrix’s consistency, the coarse particles are eliminated. The CSs of reactive powder concrete range from 200 MPa to 800 MPa. Table 1 illustrates the typical mechanical parameters and reactive powder concrete composition provided by Richard and Cheyrezy [80]. Unlike its predecessors, reactive powder concrete is very consumer-oriented. This property of workability is an advantage and the most significant criterion for large-scale cementitious material apps. The first reactive powder concrete UHPC, known as Ductal+, was released in the late 1990s. The world’s first reactive powder concrete structure was developed in 1997 for a pedestrian BE in Sherbrooke, Canada [81]. It was the first time reactive powder concrete was employed to build the complete framework. Despite the effectiveness of reactive powder concrete structures, the apps are still restricted owing to the production costs and the prohibitively high cost of the materials.
Since the year 2000, wide development has occurred in the progress of UHPCs. The engineers recognized that as concrete tech grew, advanced concrete should have more useful functions than high strength, which resulted in the names UHPC and ultra-high-performance, fiber-reinforced concrete [82]. A broad range of novel concrete formulations has been advanced to meet an increasing number of apps. Several scientists are now developing sustainable UHPC formulations with the goal of lowering both the initial and the material costs [83]. Supplementary cementitious materials such as SF, fly ash, rice husk ash, ground granulated blast furnace slag, and others [40,79,84], are employed to substitute part of the cement in the progress of sustainable UHPC and to minimize its current cement consumption. It has also been reported that UHPC could be synthesized by utilizing conventional temperature curing without compromising its characteristics. UHPC apps are becoming more common as ecologically friendly UHPC becomes more affordable. Since the early 2000s, numerous nations have been interested in different UHPC apps. UHPC has been employed to build several structures in France, including BEs, slabs, and facades [85]. UHPC is also being employed to repair and maintain transportation infrastructure in the United States [49]. Considerable efforts have been made in Australia to produce UHPC for BE construction [86]. UHPCs have mostly been employed for in situ structural reinforcement in Switzerland [87]. UHPC BE projects have been erected in Spain and the Netherlands [88]. In Malaysia, UHPC has been employed for BE construction as part of a sustainable BE building plan. Since 2010, a total of 113 UHPC BEs have been completed or advanced in Malaysia [89].
Figure 2. UHPC’s historical progress patterns [90].
Figure 2. UHPC’s historical progress patterns [90].
Buildings 13 00185 g002

2. Applications of UHPC in Bridge Engineering

In recent years, the utilization of UHPCs in BE has steadily improved, with high achievements so far. In Malaysia alone, twenty-six UHPC BEs were constructed in 2014 and 2015 [63]. As another example, UHPCs became commercially available in the U.S. in 2000 and were utilized to build the first UHPC girder BE, known as the Mars Hill BE, in Wapello County, Iowa. Furthermore, according to a recent Federal Highway Administration (FHWA) study, about 200 BE construction projects from 2006 to 2018 utilized a UHPC proprietary mix at a given scale, whether maintaining an existing BE or constructing a new BE within the state DOT BE network. Table 2 presents completed UHPC projects worldwide. In addition, Figure 3 depicts the number of UHPC BEs built in North America between 2006 and 2016.
UHPCs can be utilized in BE decks, girders, arch rings, and other elements. Table 3 provides a brief overview of the utilization of UHPCs in BE components. In the sections below, the authors highlighted the most common benefits of UHPC in BEs that have been investigated in the literature.

2.1. Bridge Piers/Column

The BE pier is a crucial component in BEs since it transfers dead and live loads from the superstructure to the foundations. The box section, a typical pier form in BEs, may efficiently reduce the inertia force in the pier by minimizing its self-weight. Nevertheless, the piers with box-formed cross-sections were damaged in numerous earthquakes, including the 1999 Chichi earthquake [96] and the 2008 Wenchuan earthquake [97]. This is primarily because of the limited lifecycle and ductility of normal-strength concrete piers. Ren et al. [98] evaluated the effectiveness of UHPC box piers exposed to seismic load utilizing computational and empirical methods. The authors investigated the ductility of UHPC box piers with varying longitudinal reinforcement and axial load ratios.
Furthermore, the UHPC was utilized as a pier jacket to improve the concrete BE pier’s seismic performance, corrosion resistance, and spalling resistance. As indicated in Figure 4, one of the UHPC pier jacket projects (the Mission BE) was completed in Canada in 2014 [99]. Additionally, including pre-fabricated segmental BE columns and ultra-high-performance, fiber-reinforced concrete (UHPFRC), segmented components of BE structure displayed substantially greater energy dissipation capacity dynamic characteristics and impact resistance [100].
In China, a commonly utilized structural method for the construction of BE piers is the concrete-filled steel tubular column, which may also be utilized for the production of multistory buildings and other supporting constructions with appropriate flexibility and high axial strength [101]. With the incorporation of UHPC into BE construction, substantial investigation into the efficiency (ductility and axial capacity) of ultra-high-performance concrete-filled steel tube columns has been conducted [102]. Ultra-high-performance concrete has also been utilized to effectively repair severely damaged reinforced concrete (RC) columns in BE piers [103]. According to the empirical findings, utilizing an ultra-high-performance concrete jacket to repair RC columns substantially advances the cyclic load resistance, energy dissipation capacity, ductility, stiffness, and strength of the column test sample.
Despite its benefits in ductility and strength, the relatively expensive costs of utilizing UHPC in BE piers have restricted its widespread adoption. As a result, attempts have been made to develop optimal UHPC mixture designs for BE piers. According to the investigation by Joe and Moustafa [104], utilizing UHPC may minimize the cross-sections of BE piers, reducing total cement and material use. According to Aboukifa et al. [105], constrained ultra-high-performance concrete cylinders with substantial longitudinal reinforcement ratios would be required to minimize the size of the cross sections and fully exploit the greater strength of UHPC. Although their findings confirmed the viability of utilizing UHPC instead of standard concrete in the construction of significant BE substructures, the cost savings that may be gained by utilizing UHPC for BE piers remains unknown owing to a lack of comparison data.
The hydration heat of UHPC can be significantly high compared to normal concrete due to its high Portland cement dose. Hence, the use of pozzolanic materials in UHPC production, such as fly ash, ground granulated blast furnace slag, etc., reduces the Portland cement dosage, minimizing hydration heat while also addressing engineering and ecological issues [33].

2.2. Bridge Piles

The utilization of piles to sustain BE loads is a standard approach for producing high-performance infrastructure. Typically, piles are built utilizing pre-cast concrete, steel sections, or cast-in-place concrete. Concrete piles face challenges such as pile collapse during installation, limited capability, and pile degradation caused by ecological threats.
The utilization of UHPC mixtures in pile fabrication has substantially enhanced the long-term capability performance of the pile. UHPC mixtures with high strengths may be driven with little to no damage. As UHPC mixtures have relatively low permeability, they are more resistant to ecological challenges. The high material costs of UHPC mixtures are balanced by the decreased material required owing to the lower demand and smaller pile sizes for maintenance work over the construction project’s lifecycle.
In accelerated bridge construction (ABC) apps, UHPC mixtures are formed into various BE elements for accelerated BE construction, utilizing the prefabricated BE elements system (PBES) tech and prefabricated BE elements. Owing to the application of UHPC in the ABC approach, BE design engineers were able to create new BE sections with geometrical dimensions, leading to the simplicity of construction and considerable material savings. The reformed Pi-girder, advanced by scientists at the Massachusetts Institute of Technology (MIT) and tested at the FHWA’s Turner Fairbank Highway Research Center (TFHRC) in McLean, Virginia, is an instance of the creative UHPC prefabricated sections utilized in ABC processes [106].
Moreover, according to a review of the published literature, UHPC’s high durability and material characteristics make it a good material for deep foundation applications. UHPC piles have a larger load capacity than steel piles, as shown by the load testing, which should result in a decrease in the number of piles needed for a standard bridge foundation [107].

2.3. Bridge Decks

Numerous deterioration-related issues such as delamination cause the end of the lifecycle in BE decks, spalling, and cracking [108], which may also be impacted by temperature and load impacts [109]. UHPC is developing as a novel strategy for a wide range of construction, BE design, and restoration issues. One novel utilization of UHPC in BEs is the rehabilitation of BE decks with the utilization of thin, bonded UHPC overlays.
UHPC is now employed to pour BE deck overlays to enhance BE deck conditions. There is a significant need for the effective and long-term rehabilitation of BE decks that have deteriorated owing to improved vehicle weight and traffic, deck cracking, freeze–thaw cycles, reinforcing steel corrosion, and concrete cover delamination. The available budget and the expected lifecycle of the repaired structure determine the BE deck restoration tech. Historically, specific asphalt mixtures, ordinary concrete overlays, and latex-modified concrete comprising polymer compounds were utilized. UHPC overlays are now being utilized effectively. UHPC overlays are helpful since they allow for the utilization of thin (2.5–5.0 cm) overlays with excellent binding to existing concrete. UHPC’s extremely incredible strength and low permeability characteristics offer appropriate strengthening as well as protection against contaminator ingresses such as deicing salts and chemical assaults.
With little extra deadweight on the BE structure, ultra-high-performance concrete overlays can reinforce the structure and avoid future water penetration and chloride [110]. One of the successful uses of ultra-high-performance concrete overlays in BE decks has been the enhancement of the Chillon viaducts, two parallel concrete highway BEs erected in Switzerland in the late 1960s. To protect the safety of the Chillon viaduct, which had been damaged owing to alkali aggregate reactivity, a 45 mm layer of Ultra-high-performance, fiber-reinforced concrete was installed on top of the deck slab in 2015, acting as the deck slab and the main girder’s external tensile reinforcement. As a result, the deck slab’s stiffness and the ultimate load capability were enhanced, and water penetration into the existing concrete was successfully avoided [111].
Owing to its large capability, low self-weight, and ease of construction, an orthotropic steel deck (OSD) is a popular BE deck tech for long-span BEs. However, numerous investigations have been conducted to address the problem of orthotropic steel decks, which is that they may be subject to fatigue cracking, particularly at the weld between the longitudinal stiffeners and the deck plate [112]. This is primarily owing to the fact that when exposed to traffic pressures, a substantial number of stress cycles are created in the fatigue-prone details [113]. The current investigation focuses on deploying a UHPC layer to rehabilitate existing orthotropic decks to solve the fatigue difficulties associated with orthotropic steel decks. For instance, Shao, Qu, Cao, and Yao [113] presented a lightweight composite deck (LWCD) built from an orthotropic steel deck with a UHPC overlay. According to the scientists, the lightweight composite deck had improved local stiffness and might efficiently prolong the fatigue life of the BE deck. Yoo and Choo [114] built a deck with an ultra-high-performance, fiber-reinforced concrete layer connected to steel girders.
Furthermore, the deck pavement is a direct-wear part of the BE structure that is impacted not only by vehicle wear but also by thermal expansion and rain erosion. As the lifespan of the BE deck pavement in China has decreased considerably in recent years because of the continual rise in traffic loads, some scientists are considering adopting UHPC materials instead of standard paving materials to counteract this challenge. Table 4 illustrates instances of the UHPC BE deck pavement utilized in China in recent years.

2.4. Bridge Girders

BEs are subjected to higher live loads than buildings; thus, as shown in Figure 5, UHPC has proven to be a viable material for BEs. The first UHPC BE—the Mars Hill BE, as shown in Figure 5a—in the United States was advanced in 2006 in Wapello County, Iowa. UHPC was employed to build the 33.5 m long, I-formed pre-stressed BE girders. UHPC’s greater CS aided in reducing the girder depth and numerous pre-stressing tendons [115]. Depending on the project’s success, the form of the UHPC girder was further improved, and Pi-formed girders were constructed, as seen in Figure 5b. After it was opened to traffic, the Jakway Park BE performed well because of its optimum design [116]. The improved productivity of a Pi-formed UHPC girder has significantly broadened the utilization of UHPC in BEs. However, the high initial costs of the proprietary UHPC employed in the two projects precluded UHPC from being widely adopted in other states. As a result, non-proprietary, cost-effective UHPC has been developed utilizing locally accessible materials. However, the potential for the employment of non-proprietary UHPCs as structural BE parts has to be researched further.
The component strength at the strength limit state is primarily considered in the design of an ultra-high-performance concrete girder [117]. The corrosion of the girder ends can dramatically decrease the strength of the BE components [118], highlighting the necessity for material with strong resistance to the infiltration of hazardous chemicals. Previous investigation has confirmed UHPC’s improved corrosion resistance. However, owing to the high costs of UHPC, its utilization in BE girders has mostly been as a repair material. UHPC, for instance, has been utilized to cover corrosion-damaged steel girder ends [118]. In this unique repair procedure, ultra-high-performance concrete panels were connected to girders utilizing shear studs welded to the flange and web around the corroded region. According to the findings of this research, employing UHPC can recover the capability lost because of corrosion damage. Graybeal performed a series of investigations on the flexural behavior of ultra-high-performance concrete BE girders and determined that UHPC I-girders might have a larger flexural capability than normal strength concrete girders with the same cross-sectional geometry [119].
UHPC girders have the added benefit of being lighter in self-weight, which might be employed in steel–concrete composite BEs to minimize production costs in long-span and continuous BEs. For the trial design of the steel ultra-high-performance concrete lightweight composite BE at the South Dongting Lake, BE, Shao and Hu [120] presented a set of novel steel–UHPC composite girders. The self-weight of the steel–ultra-high-performance concrete composite girder could be lowered by about 35 percent when compared to the conventional composite girder.

2.5. Long-Span Bridge

The Seonyu foot BE in South Korea, with a main span of 120 m, was fabricated utilizing ultra-high-performance concrete in 2002 and finished in 2004 [121]. The Seonyu foot BE structure, the world’s longest long-span BE, built utilizing ultra-high-performance concrete, required around half the material volume that would have been utilized in conventional concrete production while providing similar strength characteristics. In Japan, the Sakata-Mirai foot BE, with a span of fifty meters, was built in 2003. The BE demonstrated how a perforated web in an ultra-high-performance concrete superstructure can decrease weight while still being visually beautiful [122]. Subsequent to the achievement of these projects, ultra-high-performance concrete pedestrian BEs have been constructed throughout Australia, Europe, Asia, and North America (Canada and the U.S.) [123].
At the moment, some forms of flaws in long-span BEs have appeared, including (1) steel BE deck pavement and BE surface structure crack; (2) general crack and deflection of pre-stressed concrete continuous box girder; and (3) concrete crack in the negative moment area of steel–concrete composite beams [63,71].
The impact of the long-span BE’s bent and broken concrete beam has been a severe concern. Scholars have suggested the one-way, pre-stressed UHPC thin-wall continuous box girder construction to tackle these challenges. The conceptual design for the UHPC continuous box girder BE been completed. According to the research, this innovative form of UHPC construction could effectively minimize girder BE deflection and fracture. Using UHPC with a high tensile strength as the BE system instead of traditional concrete could dramatically enhance the stiffness of the BE deck, substantially advance the stress of the pavement layer, effectively minimize cracking, and decrease the fatigue stress of the steel structure [69].
In recent decades, the construction and design tech for long-span BEs has evolved at an increasing rate. Innovations in structural construction and design are often associated with utilizing the novel product, and UHPC has a lot of promise in this area.

2.6. Joints/Links

All aspects of the BE, including the joints, must be considered (for example, expansion joints, transverse and vertical wet joints, etc.) to achieve a long-lasting and safe highway traffic system. Table 5 describes the UHPC apps in BE joints.
The research shows that link slab components could be included in BE decks to replace the expansion joints.
This is often utilized in ABC projects. The standard connection requires complex reinforcing arrangements, which take time. The utilization of UHPC simplifies the on-site reinforcement and reduces construction time and assembly procedures. As indicated in Figure 6, two field-cast UHPC connection projects (Route 23 BE in Oneonta and Route 31 BE in Lyons) were built in 2009.
Chloride-contaminated water infiltration and debris deposition issues connected to expansion joints often occur, posing a significant long-term repair and maintenance work challenge and impacting on the structural lifecycle of BEs [128]. BE expansion joints are expensive to build and maintain. To overcome this issue, jointless and continuous BE decks with link slabs connecting adjacent girders have been suggested and advanced [129].
Several investigations [130,131,132] found that ductile concrete materials, known as engineered cementitious composites (ECC), with ordinary steel reinforcement might be employed to produce engineered cementitious composite link slabs. This connection slab was designed to resist the imposed bending moment caused by the relative deck rotations [133] or traffic loads [134]. Further investigation [135] found that ECC-linked slabs strengthened with non-corrosive fiber-reinforced polymer rather than steel reinforcement may greatly improve crack width control, deflection capability, and corrosion resistance.
Owing to their high ductility and strength, UHPCs could be a desirable material in link slab apps [136], as seen in Figure 6. The usage of an ultra-high-performance concrete connection slab is detailed in Graybeal’s work [137], as illustrated in Figure 7. The UHPC link slab in Figure 8 was utilized to repair the leaky joint, providing deck continuity and a long-lasting seal. This link slab has been functional since 2013. The performance of ultra-high-performance concrete jointless BE decks is unknown; therefore, the design could include ambiguities. Regardless of the various advantages of jointless BE decks, the United States has a standardized set of design standards and processes for such BEs, with just a few specifications and design guidelines provided.
Figure 6. Representative apps of UHPC in joint connection BEs [138].
Figure 6. Representative apps of UHPC in joint connection BEs [138].
Buildings 13 00185 g006

2.7. Bridge Bearing Component

Regarding bridge bearings, not only must high bearing compression forces be transmitted but also rotation and movement [139]. A significant manufacturing effort is required to fabricate the form in steel for spherical bearings. Using UHPC instead of steel might well have considerable advantages. Such bearing advantages are obtained without compromising the bearing’s service performance or load resistance capacity. Moreover, Table 6 summarizes and briefly analyzes the usual BEs in the app example.

3. Limitations

UHPC, as a cementitious engineering material, provides durability, higher strength, and a compact microstructure, leading to its expanded utilization in infrastructure construction [153]. Most of the time, UHPC fails to fulfill engineering performance standards and is excessively expensive when compared to conventional concrete mixtures [5]. Compared to traditional-strength concrete, UHPC provides superior durability and mechanical performance; nevertheless, its application is limited because of its high initial costs, high cement content (up to 1100 kg/m3), limited design standards, and substantial ecological impact. Furthermore, the high costs of raw materials such as steel fibers and fine silica sand, which accounted for nearly half of the overall costs, restricted its application [154].
The primary limits for utilizing UHPC in BE:
i.
Costs of raw materials: The most significant aspect for BE designers and owners is that numerous raw ingredients (such as steel fiber and silicon) and the costs of raw UHPC materials are more costly than those of standard concrete.
ii.
Ecological sustainability: The production of one tonne of PC releases about the same volume of carbon dioxide into the atmosphere as the burning of one tonne of coal [155], putting a significant burden on ecological sustainability.
iii.
Raw material requirements: UHPC is highly strict with regard to the utilization of raw materials; the form of fiber, the diameter of the gravel, and the water reducer influence the completed product’s performance. As a result, how to prepare UHPC for stable performance under varying situations has become the critical challenge limiting its widespread deployment.
iv.
Ultra-high-performance concrete opposes the current objective of sustainable production, which is to reduce greenhouse gas emissions and energy consumption [156]. Furthermore, depending on the usual empirical findings, partial or total strength loss in ordinary or high-strength concrete is more likely to develop as substitution rates rise [156]. Achieving a higher replacement level for concrete mixes without losing the hardened characteristics of concrete remains a fundamental problem in developing optimum UHPCs in terms of mechanical functioning and sustainability.
v.
Specifications: In the meantime, appropriate, standardized rules and standards for design, testing, numerical modeling, and construction should be developed like those of ordinary concrete. Furthermore, before the large-scale deployment of UHPC materials, procedures for adequate maintenance work, recognizing damage, and replacing or repairing UHPC components must be advanced and standardized to facilitate UHPC apps.
vi.
Maintenance-work requirements: In order to achieve high material strength, UHPC requires high-temperature maintenance work throughout construction. However, the BE construction process may not always be equipped with the necessary equipment for such maintenance work. As a result, UHPC is usually utilized in the prefabricated form, which limits the options for BE designs and building techniques.
In conclusion, practical apps for ultra-high-performance concrete can be found worldwide. UHPCs, oppositely, are going slowly, with constraints restricting their apps. High initial costs, restricted codes, design difficulties, sophisticated manufacturing techniques, and limited available resources impeded its commercial growth and deployment in modern construction, particularly in emerging nations. To fully realize UHPC’s enormous potential, the sector must improve its collaboration with governmental organizations, academic institutions, and owners. All parties should share this novel practical experience and knowledge of the material. As UHPC is a material with high material sensitivity, local design standards and guidelines should be advanced. More investigation into developing cost-effective and sustainable UHPC, utilizing alternative materials with comparable functionality to replace the costly UHPC composites while minimizing the ecological impact is required for improved UHPC adoption. Engineers, architects, and designers should be more willing to experiment with novel technologies and materials. With all of these efforts, UHPC could become a current and future building material, providing a more comprehensive strategy for sustainable construction.

4. Challenges

In various nations through the past two decades, ultra-high-performance concrete has been utilized for both structural and non-structural pre-cast elements. Nevertheless, owing to a lack of design guidelines and its high initial costs, this significant tech has failed to become a popular tech for daily use. Moreover, the high energy consumption and high costs of UHPC materials make it problematic for it to compete with CC designs, limiting its usage. Investigation into enhancing the sustainability and the lowering of the costs of ultra-high-performance concrete is needed to enable its future widespread use. Numerous investigations were conducted to modify the material mixtures utilizing industrial by-products and local raw materials to decrease the proportion of PC, SP, and steel fiber [157]. With reduced ecological and cost influences, ultra-high-performance concrete will be much simpler for the infrastructure market to adopt and will arouse the attention of infrastructure owners.
The primary challenges of utilizing UHPC in BE are as follows:
  • Few investigations have been conducted on the lifecycle assessment of UHPC structures. The construction industry benefits from UHPC owing to its excellent mechanical and durability characteristics. UHPC constructions have a longer lifecycle, need less maintenance work, and have lower repair costs than typical concrete structures [158]. This must be considered throughout the design phase of the structure.
  • As UHPC structures differ from normal RC requirements and the number of engineers, skilled builders, and experts are restricted, the teams experienced with UHPC design and tech challenges are necessary In the UHPC market, there are only around five major companies, mostly in North America and Europe [110]. Standards for the construction and design of UHPC buildings must be devised depending on empirical research, prior knowledge, field experiences, and scientific computation. International guidelines are difficult to develop owing to the wide range of UHPC experience in various nations [85].
  • UHPC materials are energy-intensive and costly, restricting their use. UHPC requires more study to reduce the costs and improve long-term sustainability. Several investigation studies modify material mixes by utilizing industrial by-products and regional raw materials in order to minimize cement, SP, and steel fiber consumption. If the ecological and economic costs and the effects of UHPC are decreased, infrastructure owners will be more interested.
  • Lack of knowledge about mixing, quality control, and synthesis procedures is a challenge since UHPC mixes with steel fibers and needs a multi-step mixing process and a special curing method [99].
  • Owing to the rapid curing and high binder dose, creep and shrinkage have a substantial impact on UHPC behavior. More study is required to investigate materials at the nano-, micro-, and macro-levels to correlate structural behavior and physical phenomena for large-scale building methods.

5. Future Prospects

With regard to the above review, the following future investigation topics have been highlighted:
  • The static and dynamic behavior of BE connections and elements/components made of UHPC materials is fundamentally modeled. The models can be utilized in widely accessible commercial software (For instance, ANSYS, SAP2000, etc.).
  • Develop a design and construction approach for pre-stressed UHPC girders for long-span BEs.
  • Optimal performance and reliability design methodologies include the complete lifecycle costs of a BE, including design, construction, maintenance work, and retrofitting for damaged components caused by severe occurrences such as earthquakes, hurricanes, vessel collisions, etc.
  • The enhanced lightweight UHPC can be employed to make portable BE deck panels [31].
  • Despite investigations demonstrating the possibility of substituting normal-strength concrete with UHPC in BE apps, the strategies for lowering the UHPC costs have not been extensively established, emphasizing the need for more investigations on this topic to broaden and extend UHPC uses in BEs.
  • To broaden the applicability of UHPC to jointless BEs, further investigations into the failure mechanism and mechanical characteristics of UHPC utilized for link slabs are required.

6. Summary

UHPC is an innovative novel material with superior characteristics, such as remarkable strengths and good durability, obtained via improvements in packing and homogeneity density. Since its debut in the early 1990s, there has been a substantial accumulation of knowledge on the construction, design, and material of UHPC structures, with several nations attempting to apply it to building and BE apps. UHPC materials exhibit high mechanical characteristics and durability, which can enhance the connection integrity of BE component joints, improve BE load-carrying capability, and minimize BE pavement cracking and deformation. They are presented as exclusively utilized in small- and medium-sized BEs, as well as pedestrian BEs.
UHPC is anticipated to be employed to address a variety of issues, including the general cracking and deflection of conventional pre-stressed concrete continuous steel structures, damage to steel deck pavement, fatigue cracks in steel structures, concrete cracks in the negative moment area of steel–concrete composite beams, and a variety of difficult issues associated with long-span BEs. The utilization of pre-cast segmental BE columns has been actively promoted in engineering procedures. Although conventional segmental RC columns are self-centering, their damage tolerance and energy dissipation capability remains restricted. According to the authors’ empirical and numerical analyses, pre-cast segmental UHPC columns have recently been advanced and can easily solve the aforementioned restrictions. Although the cyclic response of such BE columns has been studied empirically, the impacts of pre-cast segmental UHPC columns on the overall performance of a BE at the system level are still unknown. An extensive study on UHPC preparation procedures, structural design approaches, material characteristics, and requirements will lead to decreased material costs and broader apps.

Author Contributions

Conceptualization, S.A., W.M., I.A. and M.N.; methodology, A.A., Y.O.Ö. and M.H.A.; software, S.A.; validation, S.A., W.M., I.A., M.N., A.A., Y.O.Ö. and M.H.A.; formal analysis, A.A.; investigation, S.A., W.M., I.A., M.N., A.A., Y.O.Ö. and M.H.A.; resources, M.H.A.; data curation, M.H.A.; writing—original draft preparation, S.A., W.M., I.A., M.N., A.A., Y.O.Ö. and M.H.A.; writing—review and editing, S.A., W.M., I.A., M.N., A.A., Y.O.Ö. and M.H.A.; visualization, S.A.; supervision, M.H.A.; project administration, S.A.; funding acquisition, M.H.A. All authors have read and agreed to the published version of the manuscript.

Funding

This research received no external funding.

Data Availability Statement

Not Applicable.

Conflicts of Interest

The authors declare no conflict of interest.

Abbreviations

BEBridge engineering
UHPCUltra-high-performance concrete
UHPFRCUltra-high-performance, fiber-reinforced concrete
CSCompressive strength
RCReinforced concrete
ABCAccelerated Bridge Construction
SFSilica fume
OSDOrthotropic steel deck
FHWAFederal Highway Administration
LWCDLightweight composite deck

References

  1. ASTM C1856/C1856M-17; Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete. ASTM International: West Conshohocken, PA, USA, 2017.
  2. Mishra, O.; Singh, S. An overview of microstructural and material properties of ultra-high-performance concrete. J. Sustain. Cem.-Based Mater. 2019, 8, 97–143. [Google Scholar] [CrossRef]
  3. Du, J.; Meng, W.; Khayat, K.H.; Bao, Y.; Guo, P.; Lyu, Z.; Abu-obeidah, A.; Nassif, H.; Wang, H. New development of ultra-high-performance concrete (UHPC). Compos. Part B Eng. 2021, 224, 109220. [Google Scholar] [CrossRef]
  4. Alkaysi, M.; El-Tawil, S.; Liu, Z.; Hansen, W. Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC). Cem. Concr. Compos. 2016, 66, 47–56. [Google Scholar] [CrossRef]
  5. Wang, D.; Shi, C.; Wu, Z.; Xiao, J.; Huang, Z.; Fang, Z. A review on ultra high performance concrete: Part II. Hydration, microstructure and properties. Constr. Build. Mater. 2015, 96, 368–377. [Google Scholar] [CrossRef]
  6. Yoo, D.-Y.; Kang, S.-T.; Yoon, Y.-S. Enhancing the flexural performance of ultra-high-performance concrete using long steel fibers. Compos. Struct. 2016, 147, 220–230. [Google Scholar] [CrossRef]
  7. Schmidt, M.; Fehling, E. Ultra-high-performance concrete: Research, development and application in Europe. ACI Spec. Publ. 2005, 228, 51–78. [Google Scholar]
  8. Shi, C.; Wu, Z.; Xiao, J.; Wang, D.; Huang, Z.; Fang, Z. A review on ultra high performance concrete: Part I. Raw materials and mixture design. Constr. Build. Mater. 2015, 101, 741–751. [Google Scholar] [CrossRef]
  9. Hirschi, T.; Wombacher, F. Influence of different superplasticizers on UHPC. In Proceedings of the Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 5–7 March 2008; Kassel University Press: Kassel, Germany, 2008; pp. 77–84. [Google Scholar]
  10. Azreen, N.; Rashid, R.S.; Haniza, M.; Voo, Y.; Amran, Y.M. Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass. Constr. Build. Mater. 2018, 172, 370–377. [Google Scholar] [CrossRef]
  11. Park, S.; Lee, N.; An, G.-H.; Koh, K.-T.; Ryu, G.-S. Modeling the Effect of Alternative Cementitious Binders in Ultra-High-Performance Concrete. Materials 2021, 14, 7333. [Google Scholar] [CrossRef]
  12. Khan, M.; Cao, M.; Xie, C.; Ali, M. Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression. Case Stud. Constr. Mater. 2022, 16, e00941. [Google Scholar] [CrossRef]
  13. Khan, M.; Cao, M.; Chu, S.; Ali, M. Properties of hybrid steel-basalt fiber reinforced concrete exposed to different surrounding conditions. Constr. Build. Mater. 2022, 322, 126340. [Google Scholar] [CrossRef]
  14. Yang, R.; Yu, R.; Shui, Z.; Gao, X.; Xiao, X.; Zhang, X.; Wang, Y.; He, Y. Low carbon design of an Ultra-High Performance Concrete (UHPC) incorporating phosphorous slag. J. Clean. Prod. 2019, 240, 118157. [Google Scholar] [CrossRef]
  15. Murali, G.; Venkatesh, J.; Lokesh, N.; Nava, T.R.; Karthikeyan, K. Comparative experimental and analytical modeling of impact energy dissipation of ultra-high performance fibre reinforced concrete. KSCE J. Civ. Eng. 2018, 22, 3112–3119. [Google Scholar] [CrossRef]
  16. Li, J.; Wu, Z.; Shi, C.; Yuan, Q.; Zhang, Z. Durability of ultra-high performance concrete—A review. Constr. Build. Mater. 2020, 255, 119296. [Google Scholar] [CrossRef]
  17. Wu, C.; Li, J.; Su, Y.D. Development of Ultra-High Performance Concrete against Blasts: From Materials to Structures; Woodhead Publishing: Sawston, UK, 2018. [Google Scholar]
  18. Andrade, C.; Torres, J. Long term carbonation of UHPC. In Proceedings of the Proceedings of International Symposium on Ultra-High Performance Fiber-Reinforced Concrete, Marseille, France, 1–3 October 2013. [Google Scholar]
  19. Dai, J.-G.; Huang, B.-T.; Shah, S.P. Recent advances in strain-hardening UHPC with synthetic fibers. J. Compos. Sci. 2021, 5, 283. [Google Scholar] [CrossRef]
  20. Park, S.H.; Kim, D.J.; Ryu, G.S.; Koh, K.T. Tensile behavior of ultra high performance hybrid fiber reinforced concrete. Cem. Concr. Compos. 2012, 34, 172–184. [Google Scholar] [CrossRef]
  21. Khan, M.; Lao, J.; Dai, J.-G. Comparative study of advanced computational techniques for estimating the compressive strength of UHPC. J. Asian Concr. Fed. 2022, 8, 51–68. [Google Scholar] [CrossRef]
  22. Cao, M.; Khan, M. Effectiveness of multiscale hybrid fiber reinforced cementitious composites under single degree of freedom hydraulic shaking table. Struct. Concr. 2021, 22, 535–549. [Google Scholar] [CrossRef]
  23. Arunothayan, A.R.; Nematollahi, B.; Ranade, R.; Bong, S.H.; Sanjayan, J. Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction. Constr. Build. Mater. 2020, 257, 119546. [Google Scholar] [CrossRef]
  24. Kathirvel, P.; Sreekumaran, S. Sustainable development of ultra high performance concrete using geopolymer technology. J. Build. Eng. 2021, 39, 102267. [Google Scholar] [CrossRef]
  25. Association, N.P.C. Ultra High Performance Concrete (UHPC) Guide to Manufacturing Architectural Precast UHPC Elements; National Precast Concrete Association: Carmel, CA, USA, 2013. [Google Scholar]
  26. Qaidi, S.; Yahia, A.; Tayeh, B.A.; Unis, H.; Faraj, R.; Mohammed, A. 3D printed geopolymer composites: A review. Mater. Today Sustain. 2022, 20, 100240. [Google Scholar] [CrossRef]
  27. Qaidi, S.; Najm, H.M.; Abed, S.M.; Özkılıç, Y.O.; Al Dughaishi, H.; Alosta, M.; Sabri, M.M.S.; Alkhatib, F.; Milad, A. Concrete Containing Waste Glass as an Environmentally Friendly Aggregate: A Review on Fresh and Mechanical Characteristics. Materials 2022, 15, 6222. [Google Scholar] [CrossRef]
  28. Qaidi, S.; Najm, H.M.; Abed, S.M.; Ahmed, H.U.; Al Dughaishi, H.; Al Lawati, J.; Sabri, M.M.; Alkhatib, F.; Milad, A. Fly Ash-Based Geopolymer Composites: A Review of the Compressive Strength and Microstructure Analysis. Materials 2022, 15, 7098. [Google Scholar] [CrossRef]
  29. Wille, K.; Naaman, A.E. Pullout Behavior of High-Strength Steel Fibers Embedded in Ultra-High-Performance Concrete. ACI Mater. J. 2012, 109, 479–487. [Google Scholar]
  30. Manohar, T.; Suribabu, C.; Murali, G.; Salaimanimagudam, M. A novel steel-PAFRC composite fender for bridge pier protection under low velocity vessel impacts. In Structures; Elsevier: Amsterdam, The Netherlands, 2020; pp. 765–777. [Google Scholar]
  31. Ghasemi, S.; Zohrevand, P.; Mirmiran, A.; Xiao, Y.; Mackie, K. A super lightweight UHPC–HSS deck panel for movable bridges. Eng. Struct. 2016, 113, 186–193. [Google Scholar] [CrossRef]
  32. Habert, G.; Denarié, E.; Šajna, A.; Rossi, P. Lowering the global warming impact of bridge rehabilitations by using Ultra High Performance Fibre Reinforced Concretes. Cem. Concr. Compos. 2013, 38, 1–11. [Google Scholar] [CrossRef] [Green Version]
  33. Yalçınkaya, Ç.; Çopuroğlu, O. Hydration heat, strength and microstructure characteristics of UHPC containing blast furnace slag. J. Build. Eng. 2021, 34, 101915. [Google Scholar] [CrossRef]
  34. Adam, F.; Walia, D.; Hartmann, H.; Schünemann, P.; Großmann, J. A novel modular tlp-design for offshore wind turbines using ultra high performance concrete. In ACMSM25; Springer: Berlin/Heidelberg, Germany, 2020; pp. 257–268. [Google Scholar]
  35. Voo, Y.; Foster, S.; Pek, L. Ultra-high performance concrete—Technology for present and future. In Proceedings of the High Tech Concrete: Where Technology and Engineering Meet, Maastricht, The Netherlands, 12–14 June 2017; pp. 12–14. [Google Scholar]
  36. Guingot, L.; Dekhil, D.; Soulier, P. Strengthening of hydraulic structures with UHPC. In Proceedings of the RILEM-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Marseille, France, 1–3 October 2013; pp. 137–146. [Google Scholar]
  37. Habert, G.; Arribe, D.; Dehove, T.; Espinasse, L.; Le Roy, R. Reducing environmental impact by increasing the strength of concrete: Quantification of the improvement to concrete bridges. J. Clean. Prod. 2012, 35, 250–262. [Google Scholar] [CrossRef]
  38. Abbas, A.; Fathifazl, G.; Isgor, O.B.; Razaqpur, A.G.; Fournier, B.; Foo, S. Durability of recycled aggregate concrete designed with equivalent mortar volume method. Cem. Concr. Compos. 2009, 31, 555–563. [Google Scholar] [CrossRef]
  39. Ibrahim, A.M.; Abd, S.M.; Hussein, O.H.; Tayeh, B.A.; Najm, H.M.; Qaidi, S. Influence of adding short carbon fibers on the flexural behavior of textile-reinforced concrete one-way slab. Case Stud. Constr. Mater. 2022, 17, e01601. [Google Scholar] [CrossRef]
  40. He, X.; Yuhua, Z.; Qaidi, S.; Isleem, H.F.; Zaid, O.; Althoey, F.; Ahmad, J. Mine tailings-based geopolymers: A comprehensive review. Ceram. Int. 2022, 48, 24192–24212. [Google Scholar] [CrossRef]
  41. Faraj, R.H.; Ahmed, H.U.; Rafiq, S.; Sor, N.H.; Ibrahim, D.F.; Qaidi, S.M.A. Performance of Self-Compacting mortars modified with Nanoparticles: A systematic review and modeling. Clean. Mater. 2022, 4, 100086. [Google Scholar] [CrossRef]
  42. Emad, W.; Mohammed, A.S.; Bras, A.; Asteris, P.G.; Kurda, R.; Muhammed, Z.; Hassan, A.M.T.; Qaidi, S.M.A.; Sihag, P. Metamodel techniques to estimate the compressive strength of UHPFRC using various mix proportions and a high range of curing temperatures. Constr. Build. Mater. 2022, 349, 128737. [Google Scholar] [CrossRef]
  43. Yu, R.; Spiesz, P.; Brouwers, H. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cem. Concr. Res. 2014, 56, 29–39. [Google Scholar] [CrossRef]
  44. Salaimanimagudam, M.P.; Suribabu, C.R.; Murali, G.; Abid, S.R. Impact response of hammerhead pier fibrous concrete beams designed with topology optimization. Period. Polytech. Civ. Eng. 2020, 64, 1244–1258. [Google Scholar] [CrossRef]
  45. El-Hacha, R.; Abdelazeem, H.; Cariaga, I. Performance of UHPC Crossarms for High-Voltage Transmission Lines. Des. Build. UHPFRC 2011, 447–466. [Google Scholar] [CrossRef]
  46. Delplace, G.; Hajar, Z.; Simon, A.; Chanut, S.; Weizmann, L. Precast thin UHPFRC curved shells in a waste water treatment plant. In Proceedings of the International Symposium on Ultra-High Performance Fiber-Reinforced Concrete, Marseille, France, 1–3 October 2013; Toutlemonde, F., Resplendino, J., Eds.; pp. 49–58. [Google Scholar]
  47. Kodur, V.; Wang, T.; Cheng, F. Predicting the fire resistance behaviour of high strength concrete columns. Cem. Concr. Compos. 2004, 26, 141–153. [Google Scholar] [CrossRef] [Green Version]
  48. Vande Voort, T.L.; Suleiman, M.T.; Sritharan, S. Design and Performance Verification of UHPC Piles for Deep Foundations; Iowa State University. Center for Transportation Research and Education: Ames, IA, USA, 2008. [Google Scholar]
  49. Russell, H.G.; Graybeal, B.A.; Russell, H.G. Ultra-High Performance Concrete: A State-of-the-Art Report for the Bridge Community; United States, Federal Highway Administration, Office of Infrastructure: Washington, DC, USA, 2013. [Google Scholar]
  50. Ngo, T.; Mendis, P.; Krauthammer, T. Behavior of ultrahigh-strength prestressed concrete panels subjected to blast loading. J. Struct. Eng. 2007, 133, 1582. [Google Scholar] [CrossRef]
  51. Menétrey, P. UHPFRC cladding for the Qatar National Museum. In Proceedings of the International Symposium on Ultra-High Performance Fiber-Reinforced Concrete, Marseille, France, 1–3 October 2013; pp. 1–3. [Google Scholar]
  52. Aaleti, S.; Sritharan, S. Design of ultrahigh-performance concrete waffle deck for accelerated bridge construction. Transp. Res. Rec. 2014, 2406, 12–22. [Google Scholar] [CrossRef]
  53. Azmee, N.M.; Shafiq, N. Ultra-high performance concrete: From fundamental to applications. Case Stud. Constr. Mater. 2018, 9, e00197. [Google Scholar] [CrossRef]
  54. Jaishankar, P.; Murali, G.; Salaimanimagudam, M.P.; Amran, Y.H.M.; Fediuk, R.; Karthikeyan, K. Study of topology optimized hammerhead pier beam made with novel preplaced aggregate fibrous concrete. Period. Polytech. Civ. Eng. 2021, 65, 287–298. [Google Scholar] [CrossRef]
  55. Çelik, A.İ.; Özkılıç, Y.O.; Zeybek, Ö.; Karalar, M.; Qaidi, S.; Ahmad, J.; Burduhos-Nergis, D.D.; Bejinariu, C. Mechanical Behavior of Crushed Waste Glass as Replacement of Aggregates. Materials 2022, 15, 8093. [Google Scholar] [CrossRef]
  56. Althoey, F.; Hakeem, I.Y.; Hosen, M.A.; Qaidi, S.; Isleem, H.F.; Hadidi, H.; Shahapurkar, K.; Ahmad, J.; Ali, E. Behavior of Concrete Reinforced with Date Palm Fibers. Materials 2022, 15, 7923. [Google Scholar] [CrossRef] [PubMed]
  57. Almeshal, I.; Al-Tayeb, M.M.; Qaidi, S.M.A.; Abu Bakar, B.H.; Tayeh, B.A. Mechanical properties of eco-friendly cements-based glass powder in aggressive medium. Mater. Today Proc. 2022, 58, 1582–1587. [Google Scholar] [CrossRef]
  58. Salaimanimagudam, M.P.; Murali, G.; Vardhan, C.V.; Amran, M.; Vatin, N.; Fediuk, R.; Vasilev, Y. Impact response of preplaced aggregate fibrous concrete hammerhead pier beam designed with topology optimization. Crystals 2021, 11, 147. [Google Scholar] [CrossRef]
  59. Technavio. Global Ultra-High Performance Concrete Market—Increasing Demand for RPC to Boost Growth|Technavio. 2022. Available online: https://www.technavio.com/index.php?route=product/search&v=newsearch&search=global%20ultra-high%20performance%20concrete%20market%20from (accessed on 5 December 2022).
  60. Qaidi, S.M.A.; Tayeh, B.A.; Ahmed, H.U.; Emad, W. A review of the sustainable utilisation of red mud and fly ash for the production of geopolymer composites. Constr. Build. Mater. 2022, 350, 128892. [Google Scholar] [CrossRef]
  61. Akeed, M.H.; Qaidi, S.; Ahmed, H.U.; Faraj, R.H.; Mohammed, A.S.; Emad, W.; Tayeh, B.A.; Azevedo, A.R.G. Ultra-high-performance fiber-reinforced concrete. Part IV: Durability properties, cost assessment, applications, and challenges. Case Stud. Constr. Mater. 2022, 17, e01271. [Google Scholar] [CrossRef]
  62. Qaidi, S.M.A.; Sulaiman Atrushi, D.; Mohammed, A.S.; Unis Ahmed, H.; Faraj, R.H.; Emad, W.; Tayeh, B.A.; Mohammed Najm, H. Ultra-high-performance geopolymer concrete: A review. Constr. Build. Mater. 2022, 346, 128495. [Google Scholar] [CrossRef]
  63. Akeed, M.H.; Qaidi, S.; Ahmed, H.U.; Faraj, R.H.; Mohammed, A.S.; Emad, W.; Tayeh, B.A.; Azevedo, A.R.G. Ultra-high-performance fiber-reinforced concrete. Part I: Developments, principles, raw materials. Case Stud. Constr. Mater. 2022, 17, e01290. [Google Scholar] [CrossRef]
  64. Zeybek, Ö.; Özkılıç, Y.O.; Karalar, M.; Çelik, A.İ.; Qaidi, S.; Ahmad, J.; Burduhos-Nergis, D.D.; Burduhos-Nergis, D.P. Influence of Replacing Cement with Waste Glass on Mechanical Properties of Concrete. Materials 2022, 15, 7513. [Google Scholar] [CrossRef]
  65. Unis Ahmed, H.; Mahmood, L.J.; Muhammad, M.A.; Faraj, R.H.; Qaidi, S.M.A.; Hamah Sor, N.; Mohammed, A.S.; Mohammed, A.A. Geopolymer concrete as a cleaner construction material: An overview on materials and structural performances. Clean. Mater. 2022, 5, 100111. [Google Scholar] [CrossRef]
  66. Tayeh, B.A.; Akeed, M.H.; Qaidi, S.; Bakar, B.H.A. Influence of the proportion of materials on the rheology and mechanical strength of ultrahigh-performance concrete. Case Stud. Constr. Mater. 2022, 17, e01433. [Google Scholar] [CrossRef]
  67. Tayeh, B.A.; Akeed, M.H.; Qaidi, S.; Bakar, B.H.A. Ultra-high-performance concrete: Impacts of steel fibre shape and content on flowability, compressive strength and modulus of rupture. Case Stud. Constr. Mater. 2022, 17, e01615. [Google Scholar] [CrossRef]
  68. Qaidi, S.M.A.; Mohammed, A.S.; Ahmed, H.U.; Faraj, R.H.; Emad, W.; Tayeh, B.A.; Althoey, F.; Zaid, O.; Sor, N.H. Rubberized geopolymer composites: A comprehensive review. Ceram. Int. 2022, 48, 24234–24259. [Google Scholar] [CrossRef]
  69. Akeed, M.H.; Qaidi, S.; Ahmed, H.U.; Faraj, R.H.; Mohammed, A.S.; Emad, W.; Tayeh, B.A.; Azevedo, A.R.G. Ultra-high-performance fiber-reinforced concrete. Part II: Hydration and microstructure. Case Stud. Constr. Mater. 2022, 17, e01289. [Google Scholar] [CrossRef]
  70. Bache, H.H. Densified cement ultra-fine particle-based materials. In Proceedings of the International Conference on Superplasticizers in Concrete, Ottawa, ON, Canada, 10–12 January 1981. [Google Scholar]
  71. Akeed, M.H.; Qaidi, S.; Ahmed, H.U.; Faraj, R.H.; Majeed, S.S.; Mohammed, A.S.; Emad, W.; Tayeh, B.A.; Azevedo, A.R.G. Ultra-high-performance fiber-reinforced concrete. Part V: Mixture design, preparation, mixing, casting, and curing. Case Stud. Constr. Mater. 2022, 17, e01363. [Google Scholar] [CrossRef]
  72. Aisheh, Y.I.A.; Atrushi, D.S.; Akeed, M.H.; Qaidi, S.; Tayeh, B.A. Influence of steel fibers and microsilica on the mechanical properties of ultra-high-performance geopolymer concrete (UHP-GPC). Case Stud. Constr. Mater. 2022, 17, e01245. [Google Scholar] [CrossRef]
  73. Tayeh, B.A.; Akeed, M.H.; Qaidi, S.; Bakar, B.H.A. Influence of microsilica and polypropylene fibers on the fresh and mechanical properties of ultra-high performance geopolymer concrete (UHP-GPC). Case Stud. Constr. Mater. 2022, 17, e01367. [Google Scholar] [CrossRef]
  74. Tayeh, B.A.; Akeed, M.H.; Qaidi, S.; Bakar, B.H.A. Influence of sand grain size distribution and supplementary cementitious materials on the compressive strength of ultrahigh-performance concrete. Case Stud. Constr. Mater. 2022, 17, e01495. [Google Scholar] [CrossRef]
  75. Saeed, A.; Najm, H.M.; Hassan, A.; Sabri, M.M.S.; Qaidi, S.; Mashaan, N.S.; Ansari, K. Properties and Applications of Geopolymer Composites: A Review Study of Mechanical and Microstructural Properties. Materials 2022, 15, 8250. [Google Scholar] [CrossRef]
  76. Saeed, A.; Najm, H.M.; Hassan, A.; Qaidi, S.; Sabri, M.M.S.; Mashaan, N.S. A Comprehensive Study on the Effect of Regular and Staggered Openings on the Seismic Performance of Shear Walls. Buildings 2022, 12, 1293. [Google Scholar] [CrossRef]
  77. Rossi, P.; Arca, A.; Parant, E.; Fakhri, P. Bending and compressive behaviours of a new cement composite. Cem. Concr. Res. 2005, 35, 27–33. [Google Scholar] [CrossRef]
  78. Akeed, M.H.; Qaidi, S.; Ahmed, H.U.; Emad, W.; Faraj, R.H.; Mohammed, A.S.; Tayeh, B.A.; Azevedo, A.R.G. Ultra-high-performance fiber-reinforced concrete. Part III: Fresh and hardened properties. Case Stud. Constr. Mater. 2022, 17, e01265. [Google Scholar] [CrossRef]
  79. Aisheh, Y.I.A.; Atrushi, D.S.; Akeed, M.H.; Qaidi, S.; Tayeh, B.A. Influence of polypropylene and steel fibers on the mechanical properties of ultra-high-performance fiber-reinforced geopolymer concrete. Case Stud. Constr. Mater. 2022, 17, e01234. [Google Scholar] [CrossRef]
  80. Richard, P.; Cheyrezy, M. Composition of reactive powder concretes. Cem. Concr. Res. 1995, 25, 1501–1511. [Google Scholar] [CrossRef]
  81. Abbas, S.; Soliman, A.M.; Nehdi, M.L. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages. Constr. Build. Mater. 2015, 75, 429–441. [Google Scholar] [CrossRef]
  82. Acker, P.; Behloul, M. Ductal® technology: A large spectrum of properties, a wide range of applications. In Proc. of the Int. Symp. on UHPC; University of Kassel: Kassel, Germany, 2004; pp. 11–23. [Google Scholar]
  83. Hassan, A.; Jones, S.; Mahmud, G. Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC). Constr. Build. Mater. 2012, 37, 874–882. [Google Scholar] [CrossRef]
  84. Ahmed, H.U.; Mohammed, A.A.; Rafiq, S.; Mohammed, A.S.; Mosavi, A.; Sor, N.H.; Qaidi, S.M.A. Compressive Strength of Sustainable Geopolymer Concrete Composites: A State-of-the-Art Review. Sustainability 2021, 13, 13502. [Google Scholar] [CrossRef]
  85. Resplendino, J.; Toutlemonde, F. The UHPFRC revolution in structural design and construction. In Proceedings of the RILEM-Fib-AFGC int. Symposium on Ultra-High Performance Fibre-Reinforced Concrete, UHPFRC, Marseille, France, 1–3 October 2013; pp. 791–804. [Google Scholar]
  86. Cavill, B.; Chirgwin, G. The world’s first RPC road bridge at Shepherds Gully Creek, NSW. In Proceedings of the 5th Austroads Bridge Conference 2004, Hobart, Australia, 19–21 May 2004. [Google Scholar]
  87. Brühwiler, E.; Denarié, E. Rehabilitation and strengthening of concrete structures using ultra-high performance fibre reinforced concrete. Struct. Eng. Int. 2013, 23, 450–457. [Google Scholar] [CrossRef]
  88. Naaman, A.E.; Wille, K. The path to ultra-high performance fiber reinforced concrete (UHP-FRC): Five decades of progress. Proc. Hipermat. 2012, pp. 3–15. Available online: https://scholar.google.com/scholar?hl=en&as_sdt=0%2C5&q=%D9%84%D8%A5he+path+to+ultra-high+performance+fiber+reinforced+concrete+%28UHP-FRC%29%3A+Five+decades+of+progress.&btnG= (accessed on 5 December 2022).
  89. Tadros, M.K.; Voo, Y. Taking ultra-high-performance concrete to new heights. ASPIRE 2016, 10, 36–38. [Google Scholar]
  90. Amran, M.; Huang, S.-S.; Onaizi, A.M.; Makul, N.; Abdelgader, H.S.; Ozbakkaloglu, T. Recent trends in ultra-high performance concrete (UHPC): Current status, challenges, and future prospects. Constr. Build. Mater. 2022, 352, 129029. [Google Scholar] [CrossRef]
  91. Dingqiang, F.; Wenjing, T.; Dandian, F.; Jiahao, C.; Rui, Y.; Kaiquan, Z. Development and applications of ultra-high performance concrete in bridge engineering. IOP Conf. Ser. Earth Environ. Sci. 2018, 189, 022038. [Google Scholar] [CrossRef]
  92. Brühwiler, E. “Structural UHPFRC” to enhance bridges. In Proceedings of the 2nd International Conference on UHPC Materials and Structures UHPC 2018-China, Fuzhou, China, 7–10 November 2018; pp. 140–158. [Google Scholar]
  93. Chen, B.-C.; Wu, H.-C.; An, M.-Z.; Huang, Q.-W.; Zhao, Q. Application of ultra-high performance concrete in bridge engineering in China. In International Interactive Symposium on Ultra-High Performance Concrete; Iowa State University Digital Press: Ames, IA, USA, 2016. [Google Scholar]
  94. Su, J.-z.; Ma, X.-l.; Chen, B.-c.; Sennah, K. Full-scale bending test and parametric study on a 30-m span prestressed ultra-high performance concrete box girder. Adv. Struct. Eng. 2020, 23, 1276–1289. [Google Scholar] [CrossRef]
  95. Voo, Y.; Hafezolghorani, M.; Foster, S. Application of ultra-highperformance-fiber reinforced concrete technology for present and future. In Proceedings of the UHPC2018-China, The 2nd International Conference on UHPC Materials and Structures, Des Moines, IA, USA, 18–20 July 2016. [Google Scholar]
  96. Tien, Y.M.; Juang, D.S.; Pai, C.H.; Hisao, C.P.; Chen, C.J. Statistical analyses of relation between mortality and building type in the 1999 chi-chi earthquake. J. Chin. Inst. Eng. 2002, 25, 577–590. [Google Scholar] [CrossRef]
  97. Han, Q.; Du, X.; Liu, J.; Li, Z.; Li, L.; Zhao, J. Seismic damage of highway bridges during the 2008 Wenchuan earthquake. Earthq. Eng. Eng. Vib. 2009, 8, 263–273. [Google Scholar] [CrossRef]
  98. Ren, L.; Fang, Z.; Zhong, R.; Wang, K. Experimental and numerical investigations of the seismic performance of UHPC box piers. KSCE J. Civ. Eng. 2019, 23, 597–607. [Google Scholar] [CrossRef]
  99. Kennedy, D.; Habel, K.; Fraser, G. Ultra High-Performance Concrete Column Jacket Retrofit for the Mission Bridge. In Proceedings of the 11th Canadian Conference on Earthquake Engineering, Victoria, BC, Canada, 21–24 July 2015. [Google Scholar]
  100. Shao, X.; Pan, R.; Zhan, H.; Fan, W.; Yang, Z.; Lei, W. Experimental verification of the feasibility of a novel prestressed reactive powder concrete box-girder bridge structure. J. Bridge Eng. 2017, 22, 04017015. [Google Scholar] [CrossRef]
  101. Liu, D.; Gho, W.-M. Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns. Thin-Walled Struct. 2005, 43, 1131–1142. [Google Scholar] [CrossRef]
  102. Guler, S.; Çopur, A.; Aydogan, M. Axial capacity and ductility of circular UHPC-filled steel tube columns. Mag. Concr. Res. 2013, 65, 898–905. [Google Scholar] [CrossRef]
  103. Rabehi, B.; Ghernouti, Y.; Li, A.; Boumchedda, K. Comparative behavior under compression of concrete columns repaired by fiber reinforced polymer (FRP) jacketing and ultra high-performance fiber reinforced concrete (UHPFRC). J. Adhes. Sci. Technol. 2014, 28, 2327–2346. [Google Scholar] [CrossRef]
  104. Joe, C.D.; Moustafa, M. Cost and ecological feasibility of using UHPC in bridge piers. In Proceedings of the International Interactive Symposium on Ultra-High Performance Concrete, Des Moines, IA, USA, 18–20 July 2016. [Google Scholar]
  105. Aboukifa, M.; Moustafa, M.A.; Itani, A.M.; Naeimi, N. Durable UHPC Columns with High-Strength Steel; Accelerated Bridge Construction University Transportation Center (ABC-UTC): Miami, FL, USA, 2019. [Google Scholar]
  106. Bierwagen, D.; Keierleber, B.; Fanous, F.; Phares, B.; Couture, I. Design of Buchanan County, Iowa, Bridge Using Ultra High-Performance Concrete and PI Girders. In Proceedings of the 2008 Concrete Bridge Conference Federal Highway Administration National Concrete Bridge Council Missouri Department of Transportation American Concrete Institute (ACI), St. Louis, MO, USA, 4–7 May 2008. [Google Scholar]
  107. Vande Voort, T.L.; Suleiman, M.T.; Sritharan, S. Design and Performance Verification of Ultra-high Performance Concrete Piles for Deep Foundations. 2008. Available online: https://rosap.ntl.bts.gov/view/dot/39528 (accessed on 5 December 2022).
  108. Shann, S.V. Application of Ultra High Performance Concrete (UHPC) as a Thin-Bonded Overlay for Concrete Bridge Decks. Master’s Thesis, Michigan Technological University, Houghton, MI, USA, 2012. [Google Scholar]
  109. Zhang, H.; Zhou, M.; Feng, W.; Wen, J. Application of ultra-high performance concrete in lifeline engineering. DEStech Trans. Eng. Technol. Res. 2016, 932–939. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  110. Haber, Z.B.; Munoz, J.F.; De la Varga, I.; Graybeal, B.A. Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing. Constr. Build. Mater. 2018, 190, 1056–1068. [Google Scholar] [CrossRef]
  111. Brühwiler, E. “Structural UHPFRC”: Welcome to the post-concrete era! In International Interactive Symposium on Ultra-High Performance Concrete; Iowa State University Digital Press: Ames, IA, USA, 2016. [Google Scholar]
  112. Fisher, J.W.; Barsom, J.M. Evaluation of cracking in the rib-to-deck welds of the Bronx–Whitestone Bridge. J. Bridge Eng. 2016, 21, 04015065. [Google Scholar] [CrossRef]
  113. Shao, X.; Qu, W.; Cao, J.; Yao, Y. Static and fatigue properties of the steel-UHPC lightweight composite bridge deck with large U ribs. J. Constr. Steel Res. 2018, 148, 491–507. [Google Scholar] [CrossRef]
  114. Yoo, S.-W.; Choo, J.F. Evaluation of the flexural behavior of composite beam with inverted-T steel girder and steel fiber reinforced ultra high performance concrete slab. Eng. Struct. 2016, 118, 1–15. [Google Scholar] [CrossRef]
  115. Graybeal, B.A. Structural Behavior of Ultra-High Performance Concrete Prestressed I-Girders; United States, Federal Highway Administration, Office of Infrastructure: Washington, DC, USA, 2006. [Google Scholar]
  116. Graybeal, B.A. Structural Behavior of a 2nd Generation Ultra-High Performance Concrete Pi-Girder; United States, Federal Highway Administration, Office of Infrastructure: Washington, DC, USA, 2009. [Google Scholar]
  117. Steinberg, E. Structural reliability of prestressed UHPC flexure models for bridge girders. J. Bridge Eng. 2010, 15, 65–72. [Google Scholar] [CrossRef]
  118. Zmetra, K.M.; McMullen, K.F.; Zaghi, A.E.; Wille, K. Experimental study of UHPC repair for corrosion-damaged steel girder ends. J. Bridge Eng. 2017, 22, 04017037. [Google Scholar] [CrossRef]
  119. Graybeal, B.A. Flexural behavior of an ultrahigh-performance concrete I-girder. J. Bridge Eng. 2008, 13, 602–610. [Google Scholar] [CrossRef]
  120. Shao, X.-d.; Hu, J. The Steel-UHPC Lightweight Composite Bridge Structures; China Communication Press: Beijing, China, 2015. [Google Scholar]
  121. Behloul, M.; Lee, K. Ductal® seonyu footbridge. Struct. Concr. 2003, 4, 195–201. [Google Scholar] [CrossRef]
  122. Tanaka, Y.; Maekawa, K.; Kameyama, Y.; Ohtake, A.; Musha, H.; Watanabe, N. The innovation and application of UHPFRC bridges in Japan. Des. Build. UHPFRC 2011, 149–188. [Google Scholar]
  123. Resplendino, J.; Toulemonde, F. Designing and Building with UHPFRC; John Wiley & Sons: New York, NY, USA, 2013. [Google Scholar]
  124. Royce, M. Concrete Bridges in New York State, Aspire Magazine. 2011. Available online: http://www.aspiremagazinebyengineers.com/publication/?i=609830&p=48&pp=1&view=issueViewer (accessed on 5 December 2022).
  125. Graybeal, B.A. UHPC for PBES Connections in Seismic Regions. Mceer.buffalo.edu. Available online: http://mceer.buffalo.edu/OConnor/ftp/7NSC%20papers/Oral%20Papers/42%20Graybeal.docx (accessed on 5 December 2022).
  126. U.S. Department of Transportation/Federal Highway Administration. Completed North American Ductal® Bridges. 2022. Available online: https://www.fhwa.dot.gov/hfl/innovations/uhpc_bridges_in_north_america.cfm (accessed on 5 December 2022).
  127. Graybeal, B. Structural Behavior of a Prototype UHPC Pi-Girder. 2009. Available online: https://www.fhwa.dot.gov/publications/research/infrastructure/structures/09068/index.cfm (accessed on 5 December 2022).
  128. Lima, J.M.; de Brito, J. Inspection survey of 150 expansion joints in road bridges. Eng. Struct. 2009, 31, 1077–1084. [Google Scholar] [CrossRef]
  129. Lin, J.; Briseghella, B.; Xue, J.; Tabatabai, H.; Huang, F.; Chen, B. Temperature monitoring and response of deck-extension side-by-side box girder bridges. J. Perform. Constr. Facil. 2020, 34, 04019122. [Google Scholar] [CrossRef]
  130. Zhong, J.; Shen, J.; Wang, W.; Shi, J.; Yang, X.; Zhou, G. Working state of ECC link slabs used in continuous bridge decks. Appl. Sci. 2019, 9, 4667. [Google Scholar] [CrossRef] [Green Version]
  131. Li, V.C.; Lepech, M.D.; Li, M. Field Demonstration of Durable Link Slabs for Jointless Bridge Decks Based on Strain-Hardening Cementitious Composites. 2005. Available online: https://trid.trb.org/view/875207 (accessed on 5 December 2022).
  132. Lepech, M.D.; Li, V.C. Application of ECC for bridge deck link slabs. Mater. Struct. 2009, 42, 1185–1195. [Google Scholar] [CrossRef]
  133. Lepech, M.D.; Li, V.C. Long term durability performance of engineered cementitious composites/Langzeitbeständigkeit systematisch entwickelter zusammengesetzter Zement gebundener Werkstoffe. Restor. Build. Monum. 2006, 12, 119–132. [Google Scholar] [CrossRef]
  134. Caner, A. Behavior and design of link slabs for jointless bridge decks. PCI J. 1998, 43, 68–81. [Google Scholar] [CrossRef]
  135. Zheng, Y.; Zhang, L.; Xia, L. Investigation of the behaviour of flexible and ductile ECC link slab reinforced with FRP. Constr. Build. Mater. 2018, 166, 694–711. [Google Scholar] [CrossRef]
  136. Haikal, G.; Ramirez, J.A.; Jahanshahi, M.R.; Villamizar, S.; Abdelaleim, O. Link Slab Details and Materials. 2019. Available online: https://rosap.ntl.bts.gov/view/dot/62021 (accessed on 5 December 2022).
  137. Graybeal, B.A. Emerging UHPC-based bridge construction and preservation solutions. In Proceedings of the International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Montpellier, France, 2–4 October 2017; pp. 2–4. [Google Scholar]
  138. Graybeal, B. Design and Construction of Field-Cast UHPC Connections; United States. Federal Highway Administration: Washington, DC, USA, 2014. [Google Scholar]
  139. Hoffman, S.; Weiher, H. Innovative Design of Bridge Bearings by the use of UHPFRC. In Proceedings of the 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, 7 March 2012; pp. 973–980. [Google Scholar]
  140. Bao-chun, C.; Huang, Q.-w.; Yuan-yang, W. Design and construction of the first UHPC arch bridge in China. J. China Foreign Highw. 2016, 36, 67–71. [Google Scholar]
  141. Perry, V.H.; Seibert, P.J. The use of UHPFRC (Ductal®) for bridges in North America: The technology, applications and challenges facing commercialization. In Proceedings of the Second International Symposium on Ultra High Performance Concrete; University of Kassel: Kassel, Germany, 2008; pp. 815–822. [Google Scholar]
  142. Blais, P.Y.; Couture, M. PRECAST, prestressed pedestrian BRIDGE-WORLD’S first reactive powder concrete bridge. PCI J. 1999, 44, 60–71. [Google Scholar] [CrossRef] [Green Version]
  143. Rouse, J.; Wipf, T.J.; Phares, B.; Fanous, F.; Berg, O. Design, Construction, and Field Testing of an Ultra High Performance Concrete Pi-Girder Bridge; Iowa State University, Institute for Transportation: Ames, IA, USA, 2011. [Google Scholar]
  144. Ozyildirim, C. Evaluation of Ultra-High-Performance Fiber-Reinforced Concrete; Virginia Center for Transportation Innovation and Research: Charlottesville, VA, USA, 2011. [Google Scholar]
  145. Bierwagen, D.; Abu-Hawash, A. Ultra high performance concrete highway bridge. In Proceedings of the 2005 Mid-Continent Transportation Research Symposium, Ames, IA, USA, 18–19 August 2005; pp. 1–14. [Google Scholar]
  146. Behloul, M.; Ricciotti, R.; Ricciotti, R.F.; Pallot, P.; Leboeuf, J. Ductal pont du diable footbridge, France. In Proceedings of the fib symposium ‘‘tailor made concrete structures, Amsterdam, The Netherlands, 19–21 May 2008; pp. 335–338. [Google Scholar]
  147. de MATTEIS, D.; Marchand, P.; Petel, A.; Thibaux, T.; Fabry, N.; Chanut, S. The new Pinel Bridge in Rouen, the fifth French road bridge using ultra high performance fibre-reinforced concrete components. In Proceedings of the 17th Congress of IABSE. Creating and Renewing Urban StructuresInternational Association for Bridge and Structural Engineering, Chicago, IL, USA, 17–19 September 2008. [Google Scholar]
  148. Rebentrost, M.; Wight, G.; Fehling, E. Experience and applications of ultra-high performance concrete in Asia. In Proceedings of the 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 5–7 March 2008; pp. 19–30. [Google Scholar]
  149. Fehling, E.; Bunje, K.; Schmidt, M.; Tue, N.V.; Schreiber, W.; Humburg, E. Design of first hybrid UHPC-steel bridge across River Fulda in Kassel, Germany. In Proceedings of the IABSE Symposium: Improving Infrastructure Worldwide, Weimar, Germany, 19–21 September 2007; pp. 328–329. [Google Scholar]
  150. Nguyen, K.; Freytag, B.; Ralbovsky, M.; Rio, O. Assessment of serviceability limit state of vibrations in the UHPFRC-Wild bridge through an updated FEM using vehicle-bridge interaction. Comput. Struct. 2015, 156, 29–41. [Google Scholar] [CrossRef]
  151. Lee, C.D.; Kim, K.-B.; Choi, S. Application of ultra-high performance concrete to pedestrian cable-stayed bridges. J. Eng. Sci. Technol. 2013, 8, 296–305. [Google Scholar]
  152. Koukolík, P.; Vítek, J.L.; Brož, R.; Coufal, R.; Kalný, M.; Komanec, J.; Kvasnička, V. Construction of the first footbridge made of UHPC in the Czech Republic. In Advanced Materials Research; Trans Tech Publications Ltd.: Stafa-Zurich, Switzerland, 2015; pp. 8–13. [Google Scholar]
  153. Ghafari, E.; Costa, H.; Júlio, E. Statistical mixture design approach for eco-efficient UHPC. Cem. Concr. Compos. 2015, 55, 17–25. [Google Scholar] [CrossRef]
  154. Voo, Y.; Foster, S. Malaysia, taking ultra-high performance concrete bridges to new dimensions. In Proceedings of the Symposium on Ultra-High Performance Fibre-Reinforced Concrete, Montpellier, France, 2–4 October 2017; pp. 1033–1042. [Google Scholar]
  155. Habert, G.; Billard, C.; Rossi, P.; Chen, C.; Roussel, N. Cement production technology improvement compared to factor 4 objectives. Cem. Concr. Res. 2010, 40, 820–826. [Google Scholar] [CrossRef]
  156. Ding, M.; Yu, R.; Feng, Y.; Wang, S.; Zhou, F.; Shui, Z.; Gao, X.; He, Y.; Chen, L. Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content. Constr. Build. Mater. 2021, 273, 122023. [Google Scholar] [CrossRef]
  157. Stengel, T.; Schießl, P. Sustainable construction with UHPC–from life cycle inventory data collection to environmental impact assessment. In Proceedings of the 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 5–7 March 2008; Kassel University Press: Kassel, Germany, 2008; pp. 461–468. [Google Scholar]
  158. Racky, P. Cost-effectiveness and sustainability of UHPC. In International Symposium on Ultra High Performance Concrete; University of Kassel: Kassel, Germany, 2004; pp. 797–805. [Google Scholar]
Figure 3. Typical apps of UHPC in BE: (a) Sakata-Mirar foot BE; (b) Zhaoqing Mafang BE; (c) ultra-high-performance, fiber-reinforced concrete arch BE in Fuzhou University campus viaducts; (d) Martinet foot BE; (e) Sherbrooke pedestrian BE; (f) Mars Hill BE; (g) Shijiazhuang to Cixian highway BE; (h) Batu 6 BE; (i) Chillon [53,91,92,93,94].
Figure 3. Typical apps of UHPC in BE: (a) Sakata-Mirar foot BE; (b) Zhaoqing Mafang BE; (c) ultra-high-performance, fiber-reinforced concrete arch BE in Fuzhou University campus viaducts; (d) Martinet foot BE; (e) Sherbrooke pedestrian BE; (f) Mars Hill BE; (g) Shijiazhuang to Cixian highway BE; (h) Batu 6 BE; (i) Chillon [53,91,92,93,94].
Buildings 13 00185 g003
Figure 4. Representative apps of UHPC in BEs: pier jacket [99].
Figure 4. Representative apps of UHPC in BEs: pier jacket [99].
Buildings 13 00185 g004
Figure 5. Representative apps of UHPCs in BEs: (a) I-formed girder [115]; (b) Pi-formed girder [116].
Figure 5. Representative apps of UHPCs in BEs: (a) I-formed girder [115]; (b) Pi-formed girder [116].
Buildings 13 00185 g005
Figure 7. UHPC link slab utilized among girders on BE decks [136].
Figure 7. UHPC link slab utilized among girders on BE decks [136].
Buildings 13 00185 g007
Figure 8. Elevation image of the UHPC link slab [137].
Figure 8. Elevation image of the UHPC link slab [137].
Buildings 13 00185 g008
Table 1. Typical mechanical parameters and reactive powder concrete composition of UHPC were provided by Richard and Cheyrezy [80].
Table 1. Typical mechanical parameters and reactive powder concrete composition of UHPC were provided by Richard and Cheyrezy [80].
Ingredient in the Manufacture (kg/m3)
PCGround Quartz (d50 = 10 mm)Fine Sand (150–600 mm)Total WaterSilica FumeSteel FibersSuperplasticizer (Polyacrylate)Heat TreatmentCS (MPa)Flexural Strength (MPa)
reactive powder concrete 200955/10511622391681520 C/90 C170–23025–60
reactive powder concrete 800100039050019023063019250 C–400 C490–68045–102
Table 2. Completed UHPC projects worldwide [53].
Table 2. Completed UHPC projects worldwide [53].
YearAppLocationAdvantages
1997Pedestrian BESherbrooke, CanadaThe first UHPC structure.
2004Foot BESeonyu, Seoul, South KoreaReduced-segment arch BE.
2004RoofShawnessy LRT Station, CanadaSimple to build and requires very little maintenance work, lightweight.
2005Road BEBourg-lesValence, FranceSteel reinforcing costs are reduced by 90 percent. Lighter construction with a 66 percent weight reduction over CC.
2006Road BEMars Hill BE, United StatesThe first UHPC highway BE in the United States had a simple structure. There is no shear reinforcement.
2013Column and FaçadeMUCEM, Marseille, FranceY-formed column with a ‘Transparent’ façade.
2013Roof and FaçadeJean Bouin Stadium, ParisPre-cast UHPC components, waterproof roof and façade, slim construction with distinctive design.
2014Cladding UHPCpanelsFoundation Louis Vuitton, FranceCreative design
Table 3. Applications of UHPC in BE elements.
Table 3. Applications of UHPC in BE elements.
Ref.YearNationNameApp LocationStructure TypeAchievement of Utilizing UHPCs
[91]2011ChinaZhaoqing Mafang BEBE deckSimply supported steel composite beam BEThe first time a UHPC deck was paired with a steel box girder to create a lighter composite girder BE.
[93]2015Ultra-high-performance, fiber-reinforced concrete arch BE Arch ringArch BETo fulfill the strength requirements of the arch ring, which would be exposed to an anticipated CS of more than 100 MPa.
[94]2015Shijiazhuang to Cixian highway BEGirderThree continuous box
girders with multi-span structure
To raise the ultimate strength of the box girder while decreasing its self-weight.
[95]2016MalaysiaBatu 6 BEWhole
superstructure
Single-span box girder BETo address the need for international transportation.
[91]1997CanadaSherbrooke pedestrian BEBE deckSpace truss girder BETo minimize the BE’s self-weight and improve its corrosion resistance.
[92]2014/
2015
SwitzerlandChillon viaductsDeck slabDual-box girder structureTo advance the BE’s durability and girder stiffness and the fatigue performance of the slabs.
[92]Martinet foot BEGirderA U-formed girder with a simply supported structure To avoid damage from hazardous fluids and to maintain a crack-free condition under service stress.
[91]2006USAMars Hill BEI-girderPre-stressed beam BEFor improved lifecycle and durability
[91]2002JapanSakata-Mirar foot BEBox girderPre-stressed simply supported beam BETo provide design guidance for the UHPC structure in Japan.
Table 4. Applications of UHPCs in BE deck pavement in China.
Table 4. Applications of UHPCs in BE deck pavement in China.
PositionYearNameBE Type
Guangdong Province2011Ma Fang BESimple box girder
Guangdong Province2014Buddha Chen BEVariable section continuous steel box girder
Hunan Province2015Dong Ting Lake Second BEPlate-truss composite suspension BE
Beijing2015Tong Hui BEDeck beam arch combination BE
Tianjin2015Hai, He BEHybrid beam cable-stayed BE
Guangdong Province2016Rong Jiang BEHybrid beam cable-stayed BE
Table 5. Applications of ultra-high-performance concrete in BE joints.
Table 5. Applications of ultra-high-performance concrete in BE joints.
Ref.YearNationNameApp
[124]2011U.S.Fingerboard Road BEJoints among deck bulb tees
[125]2011U.S. Route 6 BETransverse and longitudinal joints among beams
[126]2016Pulaski SkywayJoint fill connections among the sheer pockets and slabs
[125]2007CanadaSunshine Creek BEJoint fill among pre-cast curbs and adjacent box beams
[127]2009Buller Creek BEJoint fill among adjacent box beams and among pre-cast curbs
[127]2009Eagle River BEJoint fill among pre-cast curbs and among adjacent box beams to establish live load continuity
[127]2010Wabigoon River BEJoint fill among pre-cast curbs and among adjacent box beams
[126]2013Blackwater River BEJoint fill among pre-cast curbs and among adjacent box beams
[126]2016Nipigon River BEConnections of pre-cast tower segments to connections of longitudinal, cast-in-place tower segments and transverse joints to steel beams and girders
Table 6. Examples of UHPC apps in BE bearing components.
Table 6. Examples of UHPC apps in BE bearing components.
Ref.YearCountryNameApp LocationPurpose of Utilizing UHPC
[140]2015ChinaFuzhou University Landscape
BE
Arch rib Empirical BE to promote the utilization of UHPC
[141]2007CanadaGlenmore Pedestrian BEPre-stressed T-beam Weather resistance and ease of maintenance-work.
[142]1997Sherbrooke OverpassPre-stressed, post-tensioned space trussTo investigate novel materials and architectures.
To improve the longevity of ecological compatibility.
[143]2008U.S.Jakway Park BEPi-formed beam To provide direction for future designs that utilize UHPC Pi-girders.
[144]2008Cat Point Creek BEI-formed beam To use material tensile characteristics to make building simpler.
[145]2006Mars Hill BEI-formed beam To investigate UHPC characteristics and enhance their materials.
[146]2008FrancePont du Diable Pedestrian BEU-formed beam To improve the span length and strive for a light, beautiful design.
[147]2007Pinel BEPre-stressed T-beam To use UHPC for durability and rapid building.
[148]2005PS34 BEBox girder To change the BE’s design and incorporation with the surrounding environment and lighten the structure.
[148]2005AustraliaShepherds Gully Creek BEPre-cast, pre-tensioned I-beam Empirical BEs to replace the old, aging timber BE and enhance the bearing capability.
[149]2007GermanyFriedberg BEPi-formed beam To use superior durability characteristics to replace an old, deteriorated timber structure.
[150]2010AustriaWILD BEArch rib Ecological management and light and slim constructions.
[148]2002South KoreaPeace BEPi-formed beam To strengthen diplomatic connections with France while also improving arch performance.
[151]2009Office Pedestrian BECable-stayed BE Lightweight structure and reasonable stress
[152]2013Czech RepublicCelakovice Pedestrian BESegmental deck Reduced lifecycle costs and low maintenance-work.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Abdal, S.; Mansour, W.; Agwa, I.; Nasr, M.; Abadel, A.; Onuralp Özkılıç, Y.; Akeed, M.H. Application of Ultra-High-Performance Concrete in Bridge Engineering: Current Status, Limitations, Challenges, and Future Prospects. Buildings 2023, 13, 185. https://doi.org/10.3390/buildings13010185

AMA Style

Abdal S, Mansour W, Agwa I, Nasr M, Abadel A, Onuralp Özkılıç Y, Akeed MH. Application of Ultra-High-Performance Concrete in Bridge Engineering: Current Status, Limitations, Challenges, and Future Prospects. Buildings. 2023; 13(1):185. https://doi.org/10.3390/buildings13010185

Chicago/Turabian Style

Abdal, S., Walid Mansour, Ibrahim Agwa, Mohammed Nasr, Aref Abadel, Yasin Onuralp Özkılıç, and Mahmoud H. Akeed. 2023. "Application of Ultra-High-Performance Concrete in Bridge Engineering: Current Status, Limitations, Challenges, and Future Prospects" Buildings 13, no. 1: 185. https://doi.org/10.3390/buildings13010185

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop