Next Issue
Volume 11, July
Previous Issue
Volume 11, May
 
 

Symmetry, Volume 11, Issue 6 (June 2019) – 110 articles

Cover Story (view full-size image): The guitar is eco-friendly structure being made from wood. The best quality of guitar is assured by the best quality of wood. Wood is a anisotropic orthotropic material. The anatomical structural organisation of the top plate of guitar is reflected by symmetrical patterns, with the nodal lines well organised and parallel to the longitudinal axis of the plate, corresponding to the longitudinal symmetry axis of wood. View this paper.
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
15 pages, 2365 KiB  
Article
A Test Detecting the Outliers for Continuous Distributions Based on the Cumulative Distribution Function of the Data Being Tested
by Lorentz Jäntschi
Symmetry 2019, 11(6), 835; https://doi.org/10.3390/sym11060835 - 25 Jun 2019
Cited by 38 | Viewed by 6781
Abstract
One of the pillars of experimental science is sampling. Based on the analysis of samples, estimations for populations are made. There is an entire science based on sampling. Distribution of the population, of the sample, and the connection among those two (including sampling [...] Read more.
One of the pillars of experimental science is sampling. Based on the analysis of samples, estimations for populations are made. There is an entire science based on sampling. Distribution of the population, of the sample, and the connection among those two (including sampling distribution) provides rich information for any estimation to be made. Distributions are split into two main groups: continuous and discrete. The present study applies to continuous distributions. One of the challenges of sampling is its accuracy, or, in other words, how representative the sample is of the population from which it was drawn. To answer this question, a series of statistics have been developed to measure the agreement between the theoretical (the population) and observed (the sample) distributions. Another challenge, connected to this, is the presence of outliers - regarded here as observations wrongly collected, that is, not belonging to the population subjected to study. To detect outliers, a series of tests have been proposed, but mainly for normal (Gauss) distributions—the most frequently encountered distribution. The present study proposes a statistic (and a test) intended to be used for any continuous distribution to detect outliers by constructing the confidence interval for the extreme value in the sample, at a certain (preselected) risk of being in error, and depending on the sample size. The proposed statistic is operational for known distributions (with a known probability density function) and is also dependent on the statistical parameters of the population—here it is discussed in connection with estimating those parameters by the maximum likelihood estimation method operating on a uniform U(0,1) continuous symmetrical distribution. Full article
(This article belongs to the Special Issue Symmetry in Applied Mathematics)
Show Figures

Figure 1

11 pages, 1120 KiB  
Article
Photosynthetic Efficiency is Higher in Asymmetric Leaves than in Symmetric Leaves of the Same Plant
by Mikhail V. Kozlov, Vitali Zverev and Tobias M. Sandner
Symmetry 2019, 11(6), 834; https://doi.org/10.3390/sym11060834 - 25 Jun 2019
Cited by 3 | Viewed by 4202
Abstract
Symmetry pervades nature, but asymmetry is also rather common. Deviations from genetically programmed symmetry are usually associated with internal or external developmental disturbances and may therefore be related to imperfections in physiological processes. In this study, we test the hypotheses that the photosynthetic [...] Read more.
Symmetry pervades nature, but asymmetry is also rather common. Deviations from genetically programmed symmetry are usually associated with internal or external developmental disturbances and may therefore be related to imperfections in physiological processes. In this study, we test the hypotheses that the photosynthetic efficiency of individual leaves of a plant is negatively related to their asymmetry. We measured chlorophyll fluorescence in leaves of three woody species (Betula pubescens, Populus tremula and Salix caprea) in early and late summer in two localities situated ca. 1000 km apart, and we quantified the asymmetry of these leaves by a multivariate measure based on the relative positions of several landmarks. Contrary to our expectation, we found that the photochemical efficiency of photosystem II was positively correlated with leaf fluctuating asymmetry; this effect was weak but consistent across the studied plant species, localities and seasons. Our finding adds to limited evidence that within-plant variation in leaf asymmetry is associated with variation in leaf physiology. Irrespective of the underlying mechanisms, which remain unknown, the results suggest that trees may benefit even more from their asymmetric leaves, at least in terms of photosynthesis, than they do from their more symmetric leaves. Full article
Show Figures

Figure 1

15 pages, 7323 KiB  
Article
Modified MHD Radiative Mixed Convective Nanofluid Flow Model with Consideration of the Impact of Freezing Temperature and Molecular Diameter
by Umar Khan, Adnan Abbasi, Naveed Ahmed, Sayer Obaid Alharbi, Saima Noor, Ilyas Khan, Syed Tauseef Mohyud-Din and Waqar A. Khan
Symmetry 2019, 11(6), 833; https://doi.org/10.3390/sym11060833 - 25 Jun 2019
Cited by 13 | Viewed by 2784
Abstract
Magnetohydrodynamics (MHD) deals with the analysis of electrically conducting fluids. The study of nanofluids by considering the influence of MHD phenomena is a topic of great interest from an industrial and technological point of view. Thus, the modified MHD mixed convective, nonlinear, radiative [...] Read more.
Magnetohydrodynamics (MHD) deals with the analysis of electrically conducting fluids. The study of nanofluids by considering the influence of MHD phenomena is a topic of great interest from an industrial and technological point of view. Thus, the modified MHD mixed convective, nonlinear, radiative and dissipative problem was modelled over an arc-shaped geometry for Al2O3 + H2O nanofluid at 310 K and the freezing temperature of 273.15 K. Firstly, the model was reduced into a coupled set of ordinary differential equations using similarity transformations. The impact of the freezing temperature and the molecular diameter were incorporated in the energy equation. Then, the Runge–Kutta scheme, along with the shooting technique, was adopted for the mathematical computations and code was written in Mathematica 10.0. Further, a comprehensive discussion of the flow characteristics is provided. The results for the dynamic viscosity, heat capacity and effective density of the nanoparticles were examined for various nanoparticle diameters and volume fractions. Full article
(This article belongs to the Special Issue Symmetry and Fluid Mechanics)
Show Figures

Figure 1

24 pages, 6435 KiB  
Article
Online Visual Tracking of Weighted Multiple Instance Learning via Neutrosophic Similarity-Based Objectness Estimation
by Keli Hu, Wei He, Jun Ye, Liping Zhao, Hua Peng and Jiatian Pi
Symmetry 2019, 11(6), 832; https://doi.org/10.3390/sym11060832 - 25 Jun 2019
Cited by 31 | Viewed by 2562
Abstract
An online neutrosophic similarity-based objectness tracking with a weighted multiple instance learning algorithm (NeutWMIL) is proposed. Each training sample is extracted surrounding the object location, and the distribution of these samples is symmetric. To provide a more robust weight for each sample in [...] Read more.
An online neutrosophic similarity-based objectness tracking with a weighted multiple instance learning algorithm (NeutWMIL) is proposed. Each training sample is extracted surrounding the object location, and the distribution of these samples is symmetric. To provide a more robust weight for each sample in the positive bag, the asymmetry of the importance of the samples is considered. The neutrosophic similarity-based objectness estimation with object properties (super straddling) is applied. The neutrosophic theory is a new branch of philosophy for dealing with incomplete, indeterminate, and inconsistent information. By considering the surrounding information of the object, a single valued neutrosophic set (SVNS)-based segmentation parameter selection method is proposed, to produce a well-built set of superpixels which can better explain the object area at each frame. Then, the intersection and shape-distance criteria are proposed for weighting each superpixel in the SVNS domain, mainly via three membership functions, T (truth), I (indeterminacy), and F (falsity), for each criterion. After filtering out the superpixels with low response, the newly defined neutrosophic weights are utilized for weighting each sample. Furthermore, the objectness estimation information is also applied for estimating and alleviating the problem of tracking drift. Experimental results on challenging benchmark video sequences reveal the superior performance of our algorithm when confronting appearance changes and background clutters. Full article
Show Figures

Figure 1

20 pages, 356 KiB  
Article
Total Weak Roman Domination in Graphs
by Abel Cabrera Martínez, Luis P. Montejano and Juan A. Rodríguez-Velázquez
Symmetry 2019, 11(6), 831; https://doi.org/10.3390/sym11060831 - 24 Jun 2019
Cited by 11 | Viewed by 2780
Abstract
Given a graph G = ( V , E ) , a function f : V { 0 , 1 , 2 , } is said to be a total dominating function if [...] Read more.
Given a graph G = ( V , E ) , a function f : V { 0 , 1 , 2 , } is said to be a total dominating function if u N ( v ) f ( u ) > 0 for every v V , where N ( v ) denotes the open neighbourhood of v. Let V i = { x V : f ( x ) = i } . We say that a function f : V { 0 , 1 , 2 } is a total weak Roman dominating function if f is a total dominating function and for every vertex v V 0 there exists u N ( v ) ( V 1 V 2 ) such that the function f , defined by f ( v ) = 1 , f ( u ) = f ( u ) 1 and f ( x ) = f ( x ) whenever x V \ { u , v } , is a total dominating function as well. The weight of a function f is defined to be w ( f ) = v V f ( v ) . In this article, we introduce the study of the total weak Roman domination number of a graph G, denoted by γ t r ( G ) , which is defined to be the minimum weight among all total weak Roman dominating functions on G. We show the close relationship that exists between this novel parameter and other domination parameters of a graph. Furthermore, we obtain general bounds on γ t r ( G ) and, for some particular families of graphs, we obtain closed formulae. Finally, we show that the problem of computing the total weak Roman domination number of a graph is NP-hard. Full article
(This article belongs to the Section Mathematics)
Show Figures

Figure 1

11 pages, 241 KiB  
Article
Some Symmetric Identities for Degenerate Carlitz-type (p, q)-Euler Numbers and Polynomials
by Kyung-Won Hwang and Cheon Seoung Ryoo
Symmetry 2019, 11(6), 830; https://doi.org/10.3390/sym11060830 - 24 Jun 2019
Cited by 4 | Viewed by 1740
Abstract
In this paper we define the degenerate Carlitz-type ( p , q ) -Euler polynomials by generalizing the degenerate Euler numbers and polynomials, degenerate Carlitz-type q-Euler numbers and polynomials. We also give some theorems and exact formulas, which have a connection to [...] Read more.
In this paper we define the degenerate Carlitz-type ( p , q ) -Euler polynomials by generalizing the degenerate Euler numbers and polynomials, degenerate Carlitz-type q-Euler numbers and polynomials. We also give some theorems and exact formulas, which have a connection to degenerate Carlitz-type ( p , q ) -Euler numbers and polynomials. Full article
(This article belongs to the Special Issue Polynomials: Special Polynomials and Number-Theoretical Applications)
12 pages, 296 KiB  
Article
Nonlinear Caputo Fractional Derivative with Nonlocal Riemann-Liouville Fractional Integral Condition Via Fixed Point Theorems
by Piyachat Borisut, Poom Kumam, Idris Ahmed and Kanokwan Sitthithakerngkiet
Symmetry 2019, 11(6), 829; https://doi.org/10.3390/sym11060829 - 22 Jun 2019
Cited by 32 | Viewed by 3658
Abstract
In this paper, we study and investigate an interesting Caputo fractional derivative and Riemann–Liouville integral boundary value problem (BVP): c [...] Read more.
In this paper, we study and investigate an interesting Caputo fractional derivative and Riemann–Liouville integral boundary value problem (BVP): c D 0 + q u ( t ) = f ( t , u ( t ) ) , t [ 0 , T ] , u ( k ) ( 0 ) = ξ k , u ( T ) = i = 1 m β i R L I 0 + p i u ( η i ) , where n 1 < q < n , n 2 , m , n N , ξ k , β i R , k = 0 , 1 , , n 2 , i = 1 , 2 , , m , and c D 0 + q is the Caputo fractional derivatives, f : [ 0 , T ] × C ( [ 0 , T ] , E ) E , where E is the Banach space. The space E is chosen as an arbitrary Banach space; it can also be R (with the absolute value) or C ( [ 0 , T ] , R ) with the supremum-norm. RL I 0 + p i is the Riemann–Liouville fractional integral of order p i > 0 , η i ( 0 , T ) , and i = 1 m β i η i p i + n 1 Γ ( n ) Γ ( n + p i ) T n 1 . Via the fixed point theorems of Krasnoselskii and Darbo, the authors study the existence of solutions to this problem. An example is included to illustrate the applicability of their results. Full article
(This article belongs to the Special Issue Advance in Nonlinear Analysis and Optimization)
20 pages, 1840 KiB  
Article
Application of the Consonance Solvent Concept for Accurate Prediction of Buckminster Solubility in 180 Net Solvents using COSMO-RS Approach
by Piotr Cysewski
Symmetry 2019, 11(6), 828; https://doi.org/10.3390/sym11060828 - 22 Jun 2019
Cited by 6 | Viewed by 2525
Abstract
The default COSMO-RS (Conductor like Screening Model for Real Solvents) approach is incapable of accurate computation of C60 solubility in net solvents. Additionally, there is no adequate selection of single or multiple reference solvent, which can be applied to the whole population of [...] Read more.
The default COSMO-RS (Conductor like Screening Model for Real Solvents) approach is incapable of accurate computation of C60 solubility in net solvents. Additionally, there is no adequate selection of single or multiple reference solvent, which can be applied to the whole population of 180 solvents for improving prediction of mole fraction at saturated conditions. This failure cannot be addressed to inaccurate data of the Buckminster fusion, although they pose a challenge for experimental measurement due to intense sublimation of C60 at elevated temperatures and the possibility of solvates precipitation. However, taking advantage of the richness of experimental data of fullerene solubility, it is possible to identify the source of errors expressed in terms of fluidization affinity. Classification of solvents according to the value of this fluidization term allowed for formulation of a consonance solvents approach, which enables accurate prediction of C60 solubility using the single reference solvent method. Full article
(This article belongs to the Special Issue Applied Designs in Chemical Structures with High Symmetry)
Show Figures

Figure 1

19 pages, 979 KiB  
Article
Investment Opportunities Identification Based on Macroeconomic Development, the Multiple Criteria Decision Approach
by Veronika Mitkova and Vladimír Mlynarovič
Symmetry 2019, 11(6), 827; https://doi.org/10.3390/sym11060827 - 22 Jun 2019
Cited by 4 | Viewed by 2863
Abstract
The aim of this work is to develop a “learning model” which outranks countries according to their confrontation of historical macroeconomic indicators for a given period of time with the spreads at the end of that time and to formulate a forward-looking investment [...] Read more.
The aim of this work is to develop a “learning model” which outranks countries according to their confrontation of historical macroeconomic indicators for a given period of time with the spreads at the end of that time and to formulate a forward-looking investment strategy regarding government bonds for the following time period. The mechanism of identifying investment opportunities among government bonds is based on the multiple criteria decision making technique, and we look to the Promethee II method as a symmetry approach to country ordering. The spread is defined as the difference between the yield to maturity of the 10-year government bond of a country and the Germany government bond with the same maturity. In this paper, an optimization approach based on three models is developed to find the weights of importance for macroeconomic characteristics, together with a sensitivity analysis on changes in these characteristics. The method was applied to 17 European countries characterized by 16 macroeconomic characteristics. The originality of this paper lies in the two-stage approach to the investment strategy construction based on criteria weights optimization with stability intervals for their values. Full article
Show Figures

Graphical abstract

20 pages, 396 KiB  
Article
N-Soliton Solutions for the NLS-Like Equation and Perturbation Theory Based on the Riemann–Hilbert Problem
by Yuxin Lin, Huanhe Dong and Yong Fang
Symmetry 2019, 11(6), 826; https://doi.org/10.3390/sym11060826 - 22 Jun 2019
Cited by 8 | Viewed by 3036
Abstract
In this paper, a kind of nonlinear Schrödinger (NLS) equation, called an NLS-like equation, is Riemann–Hilbert investigated. We construct a 2 × 2 Lax pair associated with the NLS equation and combine the spectral analysis to formulate the Riemann–Hilbert (R–H) problem. Then, we [...] Read more.
In this paper, a kind of nonlinear Schrödinger (NLS) equation, called an NLS-like equation, is Riemann–Hilbert investigated. We construct a 2 × 2 Lax pair associated with the NLS equation and combine the spectral analysis to formulate the Riemann–Hilbert (R–H) problem. Then, we mainly use the symmetry relationship of potential matrix Q to analyze the zeros of det P + and det P ; the N-soliton solutions of the NLS-like equation are expressed explicitly by a particular R–H problem with an unit jump matrix. In addition, the single-soliton solution and collisions of two solitons are analyzed, and the dynamic behaviors of the single-soliton solution and two-soliton solutions are shown graphically. Furthermore, on the basis of the R–H problem, the evolution equation of the R–H data with the perturbation is derived. Full article
(This article belongs to the Special Issue Ordinary and Partial Differential Equations: Theory and Applications)
Show Figures

Figure 1

32 pages, 481 KiB  
Article
Directional Thermodynamic Formalism
by Mourad Ben Slimane, Moez Ben Abid, Ines Ben Omrane and Borhen Halouani
Symmetry 2019, 11(6), 825; https://doi.org/10.3390/sym11060825 - 21 Jun 2019
Cited by 1 | Viewed by 2264
Abstract
The usual thermodynamic formalism is uniform in all directions and, therefore, it is not adapted to study multi-dimensional functions with various directional behaviors. It is based on a scaling function characterized in terms of isotropic Sobolev or Besov-type norms. The purpose of the [...] Read more.
The usual thermodynamic formalism is uniform in all directions and, therefore, it is not adapted to study multi-dimensional functions with various directional behaviors. It is based on a scaling function characterized in terms of isotropic Sobolev or Besov-type norms. The purpose of the present paper was twofold. Firstly, we proved wavelet criteria for a natural extended directional scaling function expressed in terms of directional Sobolev or Besov spaces. Secondly, we performed the directional multifractal formalism, i.e., we computed or estimated directional Hölder spectra, either directly or via some Legendre transforms on either directional scaling function or anisotropic scaling functions. We obtained general upper bounds for directional Hölder spectra. We also showed optimal results for two large classes of examples of deterministic and random anisotropic self-similar tools for possible modeling turbulence (or cascades) and textures in images: Sierpinski cascade functions and fractional Brownian sheets. Full article
(This article belongs to the Special Issue Symmetry and Complexity 2019)
11 pages, 1007 KiB  
Article
Inference about the Ratio of the Coefficients of Variation of Two Independent Symmetric or Asymmetric Populations
by Zhang Yue and Dumitru Baleanu
Symmetry 2019, 11(6), 824; https://doi.org/10.3390/sym11060824 - 21 Jun 2019
Cited by 6 | Viewed by 3089
Abstract
Coefficient of variation (CV) is a simple but useful statistical tool to make comparisons about the independent populations in many research areas. In this study, firstly, we proposed the asymptotic distribution for the ratio of the CVs of two separate symmetric or asymmetric [...] Read more.
Coefficient of variation (CV) is a simple but useful statistical tool to make comparisons about the independent populations in many research areas. In this study, firstly, we proposed the asymptotic distribution for the ratio of the CVs of two separate symmetric or asymmetric populations. Then, we derived the asymptotic confidence interval and test statistic for hypothesis testing about the ratio of the CVs of these populations. Finally, the performance of the introduced approach was studied through simulation study. Full article
(This article belongs to the Special Issue Symmetry in Applied Continuous Mechanics)
Show Figures

Figure 1

12 pages, 2501 KiB  
Article
Analytical Solution of Ground Stress Induced by Shallow Tunneling with Arbitrary Distributed Loads on Ground Surface
by Zejun Li, Jianchen Wang and Kaihang Han
Symmetry 2019, 11(6), 823; https://doi.org/10.3390/sym11060823 - 21 Jun 2019
Cited by 5 | Viewed by 2228
Abstract
The impact of shallow tunnel construction on the surrounding environment is often considered as a symmetric half-plane problem with circular holes. In this research, the analytical solutions of the ground stresses and displacements of a shallow circular tunnel in an elastic half-plane under [...] Read more.
The impact of shallow tunnel construction on the surrounding environment is often considered as a symmetric half-plane problem with circular holes. In this research, the analytical solutions of the ground stresses and displacements of a shallow circular tunnel in an elastic half-plane under arbitrary distributed loads on ground surface were derived, based on the complex variable method. Then, an application was implemented to analyze the potential plastic zone induced by shallow tunneling adjacent to the ground surface structures. The verification of the results obtained from the proposed analytical prediction model was carried out using the numerical simulations. Additionally, the influences of different boundary condition (different magnitudes and ranges of arbitrary distributed loads and different symmetric boundary conditions of the tunnel perimeter) on the distribution characteristics of the potential plastic zones were analyzed. In general, the results showed that the larger the pile loads and the closer the relative position between the tunnel and distributed loads, the more distinct the coalesced trends of the potential plastic zones around the tunnel and the potential plastic zones around the distributed loads. Full article
Show Figures

Figure 1

9 pages, 182 KiB  
Article
The Computer Course Correlation between Learning Satisfaction and Learning Effectiveness of Vocational College in Taiwan
by Ru-Yan Chen and Jih-Fu Tu
Symmetry 2019, 11(6), 822; https://doi.org/10.3390/sym11060822 - 21 Jun 2019
Cited by 4 | Viewed by 2458
Abstract
In this paper, we surveyed the influence of learn effectiveness in a computer course under the factors of learning attitude and learning problems for students in senior-high school. We followed the formula for a regression line as R = A + BX +ε [...] Read more.
In this paper, we surveyed the influence of learn effectiveness in a computer course under the factors of learning attitude and learning problems for students in senior-high school. We followed the formula for a regression line as R = A + BX +ε and simulated on SPSS platform with symmetry to obtained the results as follows: (1) In learning attitude, both the cognitive-level and behavior-level, are positively correlated with satisfaction. This means the students have cognitive-level and behavior-level more positively correlated with satisfaction in computer subjects and have a high degree of self-learning effectiveness. (2) In learning problems, the female students had higher learning effectiveness than male students, and the students who practiced on the computer on their own initiative long-term each week had higher learning effectiveness. Full article
(This article belongs to the Special Issue Selected Papers from IIKII 2019 conferences in Symmetry)
16 pages, 6837 KiB  
Article
Numerical Investigation of the Savonius Vertical Axis Wind Turbine and Evaluation of the Effect of the Overlap Parameter in Both Horizontal and Vertical Directions on Its Performance
by Mohammad Ebrahimpour, Rouzbeh Shafaghat, Rezvan Alamian and Mostafa Safdari Shadloo
Symmetry 2019, 11(6), 821; https://doi.org/10.3390/sym11060821 - 21 Jun 2019
Cited by 50 | Viewed by 10016
Abstract
Exploiting wind energy, which is a complex process in urban areas, requires turbines suitable for unfavorable weather conditions, in order to trap the wind from different directions; Savonius turbines are suitable for these conditions. In this paper, the effect of overlap ratios and [...] Read more.
Exploiting wind energy, which is a complex process in urban areas, requires turbines suitable for unfavorable weather conditions, in order to trap the wind from different directions; Savonius turbines are suitable for these conditions. In this paper, the effect of overlap ratios and the position of blades on a vertical axis wind turbine is comprehensively investigated and analyzed. For this purpose, two positive and negative overlap situations are first defined along the X-axis and examined at the different tip speed ratios of the blade, while maintaining the size of the external diameter of the rotor, to find the optimum point; then, the same procedure is done along the Y-axis. The finite volume method is used to solve the computational fluid dynamics. Two-dimensional numerical simulations are performed using URANS equations and the sliding mesh method. The turbulence model employed is a realizable K-ε model. According to the values of the dynamic torque and power coefficient, while investigating horizontal and vertical overlaps along the X- and Y-axis, the blades with overlap ratios of HOLR = +0.15 and VOLR = +0.1 show better performances when compared to other corresponding overlaps. Accordingly, the average Cm and Cp improvements are 16% and 7.5%, respectively, compared to the base with a zero overlap ratio. Full article
(This article belongs to the Special Issue Aero/Hydrodynamics and Symmetry)
Show Figures

Figure 1

10 pages, 859 KiB  
Article
On Comparing and Classifying Several Independent Linear and Non-Linear Regression Models with Symmetric Errors
by Ji-Jun Pan, Mohammad Reza Mahmoudi, Dumitru Baleanu and Mohsen Maleki
Symmetry 2019, 11(6), 820; https://doi.org/10.3390/sym11060820 - 20 Jun 2019
Cited by 44 | Viewed by 3258
Abstract
In many real world problems, science fields such as biology, computer science, data mining, electrical and mechanical engineering, and signal processing, researchers aim to compare and classify several regression models. In this paper, a computational approach, based on the non-parametric methods, is used [...] Read more.
In many real world problems, science fields such as biology, computer science, data mining, electrical and mechanical engineering, and signal processing, researchers aim to compare and classify several regression models. In this paper, a computational approach, based on the non-parametric methods, is used to investigate the similarities, and to classify several linear and non-linear regression models with symmetric errors. The ability of each given approach is then evaluated using simulated and real world practical datasets. Full article
(This article belongs to the Special Issue Symmetry in Applied Continuous Mechanics)
Show Figures

Figure 1

33 pages, 419 KiB  
Article
Asymptotic Semicircular Laws Induced by p-Adic Number Fields p and C*-Algebras over Primes p
by Ilwoo Cho
Symmetry 2019, 11(6), 819; https://doi.org/10.3390/sym11060819 - 20 Jun 2019
Viewed by 1874
Abstract
In this paper, we study asymptotic semicircular laws induced both by arbitrarily fixed C * -probability spaces, and p-adic number fields { Q p } p P , as p→ ∞ in the set P of all primes. [...] Read more.
In this paper, we study asymptotic semicircular laws induced both by arbitrarily fixed C * -probability spaces, and p-adic number fields { Q p } p P , as p→ ∞ in the set P of all primes. Full article
(This article belongs to the Special Issue Number Theory and Symmetry)
19 pages, 2102 KiB  
Article
Radial and Bilateral Fluctuating Asymmetry of Iris pumila Flowers as Indicators of Environmental Stress
by Nataša Barišić Klisarić, Danijela Miljković, Stevan Avramov, Uroš Živković and Aleksej Tarasjev
Symmetry 2019, 11(6), 818; https://doi.org/10.3390/sym11060818 - 20 Jun 2019
Cited by 3 | Viewed by 3915
Abstract
In this study we compared the biomonitoring potential of various types of flower asymmetry indices in Iris pumila (Dwarf Bearded Iris). We chose 197 naturally growing clones from the arid steppe habitat in the largest sandy area in Europe (Deliblato Sands Nature Reserve), [...] Read more.
In this study we compared the biomonitoring potential of various types of flower asymmetry indices in Iris pumila (Dwarf Bearded Iris). We chose 197 naturally growing clones from the arid steppe habitat in the largest sandy area in Europe (Deliblato Sands Nature Reserve), and we transplanted two replicates of each clone to a polluted highway site with a heavy traffic flow. After a period of acclimatization, lower levels of photosynthetic pigment concentrations and higher stomatal density and specific leaf area in transplants verified that the chosen highway site was indeed more stressful and therefore suitable for estimation of the flower asymmetry biomonitoring potential. We analyzed radially and bilaterally symmetrical flower structures (radial fluctuating asymmetry (RA) and bilateral fluctuating asymmetry (FA)) on three perianth parts—falls, standards, and styles—and calculated various asymmetry indices based on linear and geometric morphometrics. Despite utilizing a heavily polluted environment and fairly large sample sizes, only one asymmetry index was significantly higher on the polluted site with demonstrated stressful effects on utilized plants, indicating that flower asymmetry was not an efficient method for biomonitoring in the case of I. pumila RA and FA indices. Full article
(This article belongs to the Special Issue Floral Symmetry)
Show Figures

Figure 1

22 pages, 819 KiB  
Article
Neutrosophic Triangular Norms and Their Derived Residuated Lattices
by Qingqing Hu and Xiaohong Zhang
Symmetry 2019, 11(6), 817; https://doi.org/10.3390/sym11060817 - 20 Jun 2019
Cited by 7 | Viewed by 2470
Abstract
Neutrosophic triangular norms (t-norms) and their residuated lattices are not only the main research object of neutrosophic set theory, but also the core content of neutrosophic logic. Neutrosophic implications are important operators of neutrosophic logic. Neutrosophic residual implications based on neutrosophic t-norms can [...] Read more.
Neutrosophic triangular norms (t-norms) and their residuated lattices are not only the main research object of neutrosophic set theory, but also the core content of neutrosophic logic. Neutrosophic implications are important operators of neutrosophic logic. Neutrosophic residual implications based on neutrosophic t-norms can be applied to the fields of neutrosophic inference and neutrosophic control. In this paper, neutrosophic t-norms, neutrosophic residual implications, and the residuated lattices derived from neutrosophic t-norms are investigated deeply. First of all, the lattice and its corresponding system are proved to be a complete lattice and a De Morgan algebra, respectively. Second, the notions of neutrosophic t-norms are introduced on the complete lattice discussed earlier. The basic concepts and typical examples of representable and non-representable neutrosophic t-norms are obtained. Naturally, De Morgan neutrosophic triples are defined for the duality of neutrosophic t-norms and neutrosophic t-conorms with respect to neutrosophic negators. Third, neutrosophic residual implications generated from neutrosophic t-norms and their basic properties are investigated. Furthermore, residual neutrosophic t-norms are proved to be infinitely ∨-distributive, and then some important properties possessed by neutrosophic residual implications are given. Finally, a method for producing neutrosophic t-norms from neutrosophic implications is presented, and the residuated lattices are constructed on the basis of neutrosophic t-norms and neutrosophic residual implications. Full article
10 pages, 216 KiB  
Article
On Two Conjectures of Abel Grassmann’s Groupoids
by Xiaohong Zhang, Yingcang Ma and Peng Yu
Symmetry 2019, 11(6), 816; https://doi.org/10.3390/sym11060816 - 20 Jun 2019
Cited by 2 | Viewed by 2002
Abstract
The quasi-cancellativity of Abel Grassmann‘s groupoids (AG-groupoids) are discussed and two conjectures are partially solved. First, the following conjecture is proved to be true: every AG-3-band is quasi-cancellative. Moreover, a new notion of AG-(4,1)-band is proposed, and it is also proved that every [...] Read more.
The quasi-cancellativity of Abel Grassmann‘s groupoids (AG-groupoids) are discussed and two conjectures are partially solved. First, the following conjecture is proved to be true: every AG-3-band is quasi-cancellative. Moreover, a new notion of AG-(4,1)-band is proposed, and it is also proved that every AG-(4,1)-band is quasi-cancellative. Second, the notions of left (right) quasi-cancellative AG-groupoids and power-cancellative AG-groupoids are proposed, and the following results are obtained: for an AG*-groupoid or AG**-groupoid, it is left quasi-cancellative if and only if it is right quasi-cancellative; for a power-cancellative and locally power-associative AG-groupoid, it is left quasi-cancellative if and only if it is right quasi-cancellative. Finally, a general result is proved, that for any AG-groupoid, if it is left quasi-cancellative then it is right quasi-cancellative. Full article
18 pages, 4660 KiB  
Article
A Bidirectional Searching Strategy to Improve Data Quality Based on K-Nearest Neighbor Approach
by Minghui Ma, Shidong Liang and Yifei Qin
Symmetry 2019, 11(6), 815; https://doi.org/10.3390/sym11060815 - 20 Jun 2019
Cited by 4 | Viewed by 2672
Abstract
Traffic data are the basis of traffic control, planning, management, and other implementations. Incomplete traffic data that are not conducive to all aspects of transport research and related activities can have adverse effects such as traffic status identification error and poor control performance. [...] Read more.
Traffic data are the basis of traffic control, planning, management, and other implementations. Incomplete traffic data that are not conducive to all aspects of transport research and related activities can have adverse effects such as traffic status identification error and poor control performance. For intelligent transportation systems, the data recovery strategy has become increasingly important since the application of the traffic system relies on the traffic data quality. In this study, a bidirectional k-nearest neighbor searching strategy was constructed for effectively detecting and recovering abnormal data considering the symmetric time network and the correlation of the traffic data in time dimension. Moreover, the state vector of the proposed bidirectional searching strategy was designed based the bidirectional retrieval for enhancing the accuracy. In addition, the proposed bidirectional searching strategy shows significantly more accuracy compared to those of the previous methods. Full article
Show Figures

Figure 1

16 pages, 1724 KiB  
Concept Paper
Chemical Basis of Biological Homochirality during the Abiotic Evolution Stages on Earth
by Josep M. Ribó and David Hochberg
Symmetry 2019, 11(6), 814; https://doi.org/10.3390/sym11060814 - 20 Jun 2019
Cited by 18 | Viewed by 3731
Abstract
Spontaneous mirror symmetry breaking (SMSB), a phenomenon leading to non-equilibrium stationary states (NESS) that exhibits biases away from the racemic composition is discussed here in the framework of dissipative reaction networks. Such networks may lead to a metastable racemic non-equilibrium stationary state that [...] Read more.
Spontaneous mirror symmetry breaking (SMSB), a phenomenon leading to non-equilibrium stationary states (NESS) that exhibits biases away from the racemic composition is discussed here in the framework of dissipative reaction networks. Such networks may lead to a metastable racemic non-equilibrium stationary state that transforms into one of two degenerate but stable enantiomeric NESSs. In such a bifurcation scenario, the type of the reaction network, as well the boundary conditions, are similar to those characterizing the currently accepted stages of emergence of replicators and autocatalytic systems. Simple asymmetric inductions by physical chiral forces during previous stages of chemical evolution, for example in astrophysical scenarios, must involve unavoidable racemization processes during the time scales associated with the different stages of chemical evolution. However, residual enantiomeric excesses of such asymmetric inductions suffice to drive the SMSB stochastic distribution of chiral signs into a deterministic distribution. According to these features, we propose that a basic model of the chiral machinery of proto-life would emerge during the formation of proto-cell systems by the convergence of the former enantioselective scenarios. Full article
(This article belongs to the Special Issue Possible Scenarios for Homochirality on Earth)
Show Figures

Figure 1

8 pages, 676 KiB  
Article
Filtering Method Based on Symmetrical Second Order Systems
by Cristian Toma
Symmetry 2019, 11(6), 813; https://doi.org/10.3390/sym11060813 - 20 Jun 2019
Viewed by 1869
Abstract
This study presents a filtering and sampling structure based on symmetrical second order systems working on half-period. It is shown that undamped second order oscillating systems working on half-period could provide: (i) a large attenuation coefficient for an alternating signal (due to the [...] Read more.
This study presents a filtering and sampling structure based on symmetrical second order systems working on half-period. It is shown that undamped second order oscillating systems working on half-period could provide: (i) a large attenuation coefficient for an alternating signal (due to the filtering second order system), and (ii) a robust sampling procedure (the slope of the generated output being zero at the sampling time moment). Unlike previous studies on the same topics, these results are achieved without the use of an additional integrator. Full article
(This article belongs to the Special Issue Symmetry and Dynamical Systems)
Show Figures

Figure 1

13 pages, 291 KiB  
Article
Determining Fuzzy Distance between Sets by Application of Fixed Point Technique Using Weak Contractions and Fuzzy Geometric Notions
by Parbati Saha, Shantau Guria, Binayak S. Choudhury and Manuel De la Sen
Symmetry 2019, 11(6), 812; https://doi.org/10.3390/sym11060812 - 19 Jun 2019
Cited by 2 | Viewed by 1995
Abstract
In the present paper, we solve the problem of determining the fuzzy distance between two subsets of a fuzzy metric space. We address the problem by reducing it to the problem of finding an optimal approximate solution of a fixed point equation. This [...] Read more.
In the present paper, we solve the problem of determining the fuzzy distance between two subsets of a fuzzy metric space. We address the problem by reducing it to the problem of finding an optimal approximate solution of a fixed point equation. This approach is well studied for the corresponding problem in metric spaces and is known as proximity point problem. We employ fuzzy weak contractions for that purpose. Fuzzy weak contraction is a recently introduced concept intermediate to a fuzzy contraction and a fuzzy non-expansive mapping. Fuzzy versions of some geometric properties essentially belonging to Hilbert spaces are considered in the main theorem. We include an illustrative example and two corollaries, one of which comes from a well-known fixed point theorem. The illustrative example shows that the main theorem properly includes its corollaries. The work is in the domain of fuzzy global optimization by use of fixed point methods. Full article
(This article belongs to the Special Issue Advance in Nonlinear Analysis and Optimization)
12 pages, 250 KiB  
Article
Iterative Algorithms for a System of Variational Inclusions in Banach Spaces
by Lu-Chuan Ceng, Mihai Postolache and Yonghong Yao
Symmetry 2019, 11(6), 811; https://doi.org/10.3390/sym11060811 - 19 Jun 2019
Cited by 16 | Viewed by 2058
Abstract
A system of variational inclusions (GSVI) is considered in Banach spaces. An implicit iterative procedure is proposed for solving the GSVI. Strong convergence of the proposed algorithm is given. Full article
(This article belongs to the Special Issue Advance in Nonlinear Analysis and Optimization)
15 pages, 3573 KiB  
Article
Magnetohydrodynamic and Nanoparticle Effects in Vertical Annular Subcooled Flow Boiling
by Mohammad Yaghoub Abdollahzadeh Jamalabadi
Symmetry 2019, 11(6), 810; https://doi.org/10.3390/sym11060810 - 19 Jun 2019
Cited by 3 | Viewed by 2673
Abstract
The control of heated fluid is of interest in many fields of engineering, such as boiler and heat exchanger design. The broken symmetry of a thermo-physical system within a multi-sized media could be used to control its physical characteristics. In the current study, [...] Read more.
The control of heated fluid is of interest in many fields of engineering, such as boiler and heat exchanger design. The broken symmetry of a thermo-physical system within a multi-sized media could be used to control its physical characteristics. In the current study, the effects of magnetohydrodynamic (MHD) forces and nanoparticles on boiling in a subcooled region inside an upright annular pipe have been investigated. The effect of magneto hydrodynamics on the base fluid (liquid water) was measured, and different nanoparticle concentrations were employed as the working fluids. The magnetic field perpendicular to fluid flow is used to control the liquid water and vapor water phase motion. The governing equation of motion and conservation of energy in both phases is solved with the aid of correlation for vaporization and condensation of nucleate boiling on the wall. The results of the mathematical simulation are in suitable agreement with the results of previous experiments. As associated with pure water, the results with dilute Nanofluids presented that the application of nanoparticles homogenized the temperature difference through the fluid and vapor phase. The results show that the MHD controller is a powerful method to decrease the amplitude of the vaporization and resulted in oscillations. Full article
(This article belongs to the Special Issue Future and Prospects in Non-Newtonian and Nanofluids)
Show Figures

Figure 1

19 pages, 4684 KiB  
Article
Research on a Tool Wear Monitoring Algorithm Based on Residual Dense Network
by Yiting Li, Qingsheng Xie, Haisong Huang and Qipeng Chen
Symmetry 2019, 11(6), 809; https://doi.org/10.3390/sym11060809 - 19 Jun 2019
Cited by 10 | Viewed by 2794
Abstract
To accurately and efficiently detect tool wear values during production and processing activities, a new online detection model is proposed called the Residual Dense Network (RDN). The model is created with two main steps: Firstly, the time-domain signals for a cutting tool are [...] Read more.
To accurately and efficiently detect tool wear values during production and processing activities, a new online detection model is proposed called the Residual Dense Network (RDN). The model is created with two main steps: Firstly, the time-domain signals for a cutting tool are obtained (e.g., using acceleration sensors); these signals are processed to denoise and segmented to provide a larger number of uniform samples. This processing helps to improve the robustness of the model. Secondly, a new deep convolutional neural network is proposed to extract features adaptively, by combining the idea of a recursive residual network and a dense network. Notably, this method is specifically tailored to the tool wear value detection problem. In this way, the limitations of traditional manual feature extraction steps can be avoided. The experimental results demonstrate that the proposed method is promising in terms of detection accuracy and speed; it provides a new way to detect tool wear values in practical industrial scenarios. Full article
(This article belongs to the Special Issue Novel Machine Learning Approaches for Intelligent Big Data 2019)
Show Figures

Figure 1

18 pages, 522 KiB  
Article
Intuitionistic Type-2 Fuzzy Set and Its Properties
by Surajit Dan, Mohuya B. Kar, Saibal Majumder, Bikashkoli Roy, Samarjit Kar and Dragan Pamucar
Symmetry 2019, 11(6), 808; https://doi.org/10.3390/sym11060808 - 18 Jun 2019
Cited by 18 | Viewed by 5073
Abstract
Decision making under uncertainty describes situations that consider a profound lack of knowledge, where the functional form is completely unknown, and often, the relevant input and output variables are unknown as well. Data, being the vital input of decision making, contain a dissimilar [...] Read more.
Decision making under uncertainty describes situations that consider a profound lack of knowledge, where the functional form is completely unknown, and often, the relevant input and output variables are unknown as well. Data, being the vital input of decision making, contain a dissimilar level of imprecision that necessitates different approaches for making a proper and legitimate decision. In this article, we propose the concept of the intuitionistic type-2 fuzzy set (IT2FS). Several arithmetic operations on IT2FS such as union, intersection, complement, containment, etc., are defined, and the related algebraic properties of IT2FS are also studied. Subsequently, we define two new operators, namely the necessity operator and the possibility operator, to convert an IT2FS into an ordinary T2FS, and then discuss some of their basic properties. Moreover, in this study, two distance measures, the Hamming distance and Euclidian distance of IT2FS, are proposed, and their applications are illustrated with an example. Full article
Show Figures

Figure 1

29 pages, 378 KiB  
Article
Multi-Attribute Decision Making Based on Intuitionistic Fuzzy Power Maclaurin Symmetric Mean Operators in the Framework of Dempster-Shafer Theory
by Hui Gao, Hui Zhang and Peide Liu
Symmetry 2019, 11(6), 807; https://doi.org/10.3390/sym11060807 - 18 Jun 2019
Cited by 8 | Viewed by 2007
Abstract
It is well known that there are some unfavorable shortcomings in the ordinary operational rules (OORs) of intuitionistic fuzzy number (IFN), and there exists a close and forceful connection between the intuitionistic fuzzy set (IFS) and Dempster-Shafer Theory (DST). We can utilize this [...] Read more.
It is well known that there are some unfavorable shortcomings in the ordinary operational rules (OORs) of intuitionistic fuzzy number (IFN), and there exists a close and forceful connection between the intuitionistic fuzzy set (IFS) and Dempster-Shafer Theory (DST). We can utilize this relationship to present a transparent and fruitful semantic framework for IFS in terms of DST. In the framework of DST, an IFN can be converted into a basic probability assignment (BPA) and operations on IFNs can be represented as operations on a belief interval (BI), which can break away from the revealed shortcomings of the OORs of the IFN. Although there are many operators to aggregate the IFN, the operator to aggregate the BPA is rare. The Maclaurin symmetric mean (MSM) operator has the advantage of considering interrelationships among any number of attributes. The power average (PA) operator can reduce the influences of extreme evaluation values. In addition, for measuring the difference between IFNs, we replace the Hamming distance and Euclidean distance with the Jousselme distance (JD). In this paper, we develop an intuitionistic fuzzy power MSM (IFPMSMDST) operator and an intuitionistic fuzzy weighted power MSM (IFPWMSMDST) operator in the framework of the DST and provide their favorable properties. Then, we propose a novel method based on the proposed operators to solve multi-attribute decision-making (MADM) problems without intermediate defuzzification when their attributes and weights are both IFNs. Finally, some examples are utilized to demonstrate that the proposed methods outperform the previous ones. Full article
13 pages, 1356 KiB  
Article
Structural Properties of Vicsek-like Deterministic Multifractals
by Eugen Mircea Anitas, Giorgia Marcelli, Zsolt Szakacs, Radu Todoran and Daniela Todoran
Symmetry 2019, 11(6), 806; https://doi.org/10.3390/sym11060806 - 18 Jun 2019
Cited by 6 | Viewed by 2609
Abstract
Deterministic nano-fractal structures have recently emerged, displaying huge potential for the fabrication of complex materials with predefined physical properties and functionalities. Exploiting the structural properties of fractals, such as symmetry and self-similarity, could greatly extend the applicability of such materials. Analyses of small-angle [...] Read more.
Deterministic nano-fractal structures have recently emerged, displaying huge potential for the fabrication of complex materials with predefined physical properties and functionalities. Exploiting the structural properties of fractals, such as symmetry and self-similarity, could greatly extend the applicability of such materials. Analyses of small-angle scattering (SAS) curves from deterministic fractal models with a single scaling factor have allowed the obtaining of valuable fractal properties but they are insufficient to describe non-uniform structures with rich scaling properties such as fractals with multiple scaling factors. To extract additional information about this class of fractal structures we performed an analysis of multifractal spectra and SAS intensity of a representative fractal model with two scaling factors—termed Vicsek-like fractal. We observed that the box-counting fractal dimension in multifractal spectra coincide with the scattering exponent of SAS curves in mass-fractal regions. Our analyses further revealed transitions from heterogeneous to homogeneous structures accompanied by changes from short to long-range mass-fractal regions. These transitions are explained in terms of the relative values of the scaling factors. Full article
(This article belongs to the Special Issue Symmetry and Mesoscopic Physics)
Show Figures

Figure 1

Previous Issue
Next Issue
Back to TopTop