Remote Sensing

1193 KiB

Open AccessArticle

Mapping Forest Canopy Height Across Large Areas by Upscaling ALS Estimates with Freely Available Satellite Data

by Phil Wilkes, Simon D. Jones, Lola Suarez, Andrew Mellor, William Woodgate, Mariela Soto-Berelov, Andrew Haywood and Andrew K. Skidmore

Remote Sens. 2015, 7(9), 12563-12587; https://doi.org/10.3390/rs70912563 - 23 Sep 2015

Cited by 42 | Viewed by 9991

Abstract

Operational assessment of forest structure is an on-going challenge for land managers, particularly over large, remote or inaccessible areas. Here, we present an easily adopted method for generating a continuous map of canopy height at a 30 m resolution, demonstrated over 2.9 million [...] Read more.

Operational assessment of forest structure is an on-going challenge for land managers, particularly over large, remote or inaccessible areas. Here, we present an easily adopted method for generating a continuous map of canopy height at a 30 m resolution, demonstrated over 2.9 million hectares of highly heterogeneous forest (canopy height 0–70 m) in Victoria, Australia. A two-stage approach was utilized where Airborne Laser Scanning (ALS) derived canopy height, captured over ~18% of the study area, was used to train a regression tree ensemble method; random forest. Predictor variables, which have a global coverage and are freely available, included Landsat Thematic Mapper (Tasselled Cap transformed), Moderate Resolution Imaging Spectroradiometer Normalized Difference Vegetation Index time series, Shuttle Radar Topography Mission elevation data and other ancillary datasets. Reflectance variables were further processed to extract additional spatial and temporal contextual and textural variables. Modeled canopy height was validated following two approaches; (i) random sample cross validation; and (ii) with 108 inventory plots from outside the ALS capture extent. Both the cross validation and comparison with inventory data indicate canopy height can be estimated with a Root Mean Square Error (RMSE) of ≤ 31% (~5.6 m) at the 95th percentile confidence interval. Subtraction of the systematic component of model error, estimated from training data error residuals, rescaled canopy height values to more accurately represent the response variable distribution tails e.g., tall and short forest. Two further experiments were carried out to test the applicability and scalability of the presented method. Results suggest that (a) no improvement in canopy height estimation is achieved when models were constructed and validated for smaller geographic areas, suggesting there is no upper limit to model scalability; and (b) training data can be captured over a small percentage of the study area (~6%) if response and predictor variable variance is captured within the training cohort, however RMSE is higher than when compared to a stratified random sample. Full article

► Show Figures

Graphical abstract

1663 KiB

Open AccessArticle

Flood Mapping Based on Multiple Endmember Spectral Mixture Analysis and Random Forest Classifier—The Case of Yuyao, China

by Quanlong Feng, Jianhua Gong, Jiantao Liu and Yi Li

Remote Sens. 2015, 7(9), 12539-12562; https://doi.org/10.3390/rs70912539 - 23 Sep 2015

Cited by 42 | Viewed by 8002

Abstract

Remote sensing is recognized as a valuable tool for flood mapping due to its synoptic view and continuous coverage of the flooding event. This paper proposed a hybrid approach based on multiple endmember spectral analysis (MESMA) and Random Forest classifier to extract inundated [...] Read more.

Remote sensing is recognized as a valuable tool for flood mapping due to its synoptic view and continuous coverage of the flooding event. This paper proposed a hybrid approach based on multiple endmember spectral analysis (MESMA) and Random Forest classifier to extract inundated areas in Yuyao City in China using medium resolution optical imagery. MESMA was adopted to tackle the mixing pixel problem induced by medium resolution data. Specifically, 35 optimal endmembers were selected to construct a total of 3111 models in the MESMA procedure to derive accurate fraction information. A multi-dimensional feature space was constructed including the normalized difference water index (NDWI), topographical parameters of height, slope, and aspect together with the fraction maps. A Random Forest classifier consisting of 200 decision trees was adopted to classify the post-flood image based on the above multi-features. Experimental results indicated that the proposed method can extract the inundated areas precisely with a classification accuracy of 94% and a Kappa index of 0.88. The inclusion of fraction information can help improve the mapping accuracy with an increase of 2.5%. Moreover, the proposed method also outperformed the maximum likelihood classifier and the NDWI thresholding method. This research provided a useful reference for flood mapping using medium resolution optical remote sensing imagery. Full article

(This article belongs to the Special Issue Remote Sensing in Flood Monitoring and Management)

► Show Figures

Graphical abstract

2334 KiB

Open AccessArticle

Efficient Wetland Surface Water Detection and Monitoring via Landsat: Comparison with in situ Data from the Everglades Depth Estimation Network

by John W. Jones

Remote Sens. 2015, 7(9), 12503-12538; https://doi.org/10.3390/rs70912503 - 23 Sep 2015

Cited by 95 | Viewed by 10278

Abstract

The U.S. Geological Survey is developing new Landsat science products. One, named Dynamic Surface Water Extent (DSWE), is focused on the representation of ground surface inundation as detected in cloud-/shadow-/snow-free pixels for scenes collected over the U.S. and its territories. Characterization of DSWE [...] Read more.

The U.S. Geological Survey is developing new Landsat science products. One, named Dynamic Surface Water Extent (DSWE), is focused on the representation of ground surface inundation as detected in cloud-/shadow-/snow-free pixels for scenes collected over the U.S. and its territories. Characterization of DSWE uncertainty to facilitate its appropriate use in science and resource management is a primary objective. A unique evaluation dataset developed from data made publicly available through the Everglades Depth Estimation Network (EDEN) was used to evaluate one candidate DSWE algorithm that is relatively simple, requires no scene-based calibration data, and is intended to detect inundation in the presence of marshland vegetation. A conceptual model of expected algorithm performance in vegetated wetland environments was postulated, tested and revised. Agreement scores were calculated at the level of scenes and vegetation communities, vegetation index classes, water depths, and individual EDEN gage sites for a variety of temporal aggregations. Landsat Archive cloud cover attribution errors were documented. Cloud cover had some effect on model performance. Error rates increased with vegetation cover. Relatively low error rates for locations of little/no vegetation were unexpectedly dominated by omission errors due to variable substrates and mixed pixel effects. Examined discrepancies between satellite and in situ modeled inundation demonstrated the utility of such comparisons for EDEN database improvement. Importantly, there seems no trend or bias in candidate algorithm performance as a function of time or general hydrologic conditions, an important finding for long-term monitoring. The developed database and knowledge gained from this analysis will be used for improved evaluation of candidate DSWE algorithms as well as other measurements made on Everglades surface inundation, surface water heights and vegetation using radar, lidar and hyperspectral instruments. Although no other sites have such an extensive in situ network or long-term records, the broader applicability of this and other candidate DSWE algorithms is being evaluated in other wetlands using this work as a guide. Continued interaction among DSWE producers and potential users will help determine whether the measured accuracies are adequate for practical utility in resource management. Full article

(This article belongs to the Special Issue Towards Remote Long-Term Monitoring of Wetland Landscapes)

► Show Figures

Graphical abstract

2494 KiB

Open AccessArticle

Seasonal Variation of Colored Dissolved Organic Matter in Barataria Bay, Louisiana, Using Combined Landsat and Field Data

by Ishan Joshi and Eurico J. D’Sa

Remote Sens. 2015, 7(9), 12478-12502; https://doi.org/10.3390/rs70912478 - 23 Sep 2015

Cited by 48 | Viewed by 9301

Abstract

Coastal bays, such as Barataria Bay, are important transition zones between the terrigenous and marine environments that are also optically complex due to elevated amounts of particulate and dissolved constituents. Monthly field data collected over a period of 15 months in 2010 and [...] Read more.

Coastal bays, such as Barataria Bay, are important transition zones between the terrigenous and marine environments that are also optically complex due to elevated amounts of particulate and dissolved constituents. Monthly field data collected over a period of 15 months in 2010 and 2011 in Barataria Bay were used to develop an empirical band ratio algorithm for the Landsat-5 TM that showed a good correlation with the Colored Dissolved Organic Matter (CDOM) absorption coefficient at 355 nm (a_g355) (R² = 0.74). Landsat-derived CDOM maps generally captured the major details of CDOM distribution and seasonal influences, suggesting the potential use of Landsat imagery to monitor biogeochemistry in coastal water environments. An investigation of the seasonal variation in a_g355 conducted using Landsat-derived a_g355 as well as field data suggested the strong influence of seasonality in the different regions of the bay with the marine end members (lower bay) experiencing generally low but highly variable a_g355 and the freshwater end members (upper bay) experiencing high a_g355 with low variability. Barataria Bay experienced a significant increase in a_g355 during the freshwater release at the Davis Pond Freshwater Diversion (DPFD) following the Deep Water Horizon oil spill in 2010 and following the Mississippi River (MR) flood conditions in 2011, resulting in a weak linkage to salinity in comparison to the other seasons. Tree based statistical analysis showed the influence of high river flow conditions, high- and low-pressure systems that appeared to control a_g355 by ~28%, 29% and 43% of the time duration over the study period at the marine end member just outside the bay. An analysis of CDOM variability in 2010 revealed the strong influence of the MR in controlling CDOM abundance in the lower bay during the high flow conditions, while strong winds associated with cold fronts significantly increase CDOM abundance in the upper bay, thus revealing the important role these events play in the CDOM dynamics of the bay. Full article

(This article belongs to the Special Issue Remote Sensing of Water Resources)

► Show Figures

Graphical abstract

7717 KiB

Open AccessArticle

Mapping Impervious Surface Distribution with Integration of SNNP VIIRS-DNB and MODIS NDVI Data

by Wei Guo, Dengsheng Lu, Yanlan Wu and Jixian Zhang

Remote Sens. 2015, 7(9), 12459-12477; https://doi.org/10.3390/rs70912459 - 22 Sep 2015

Cited by 67 | Viewed by 8093

Abstract

Data from the U.S. Defense Meteorological Satellite Program’s Operational Line-scan System are often used to map impervious surface area (ISA) distribution at regional and global scales, but its coarse spatial resolution and data saturation produce high inaccuracy in ISA estimation. Suomi National Polar-orbiting [...] Read more.

Data from the U.S. Defense Meteorological Satellite Program’s Operational Line-scan System are often used to map impervious surface area (ISA) distribution at regional and global scales, but its coarse spatial resolution and data saturation produce high inaccuracy in ISA estimation. Suomi National Polar-orbiting Partnership (SNPP) Visible Infrared Imaging Radiometer Suite’s Day/Night Band (VIIRS-DNB) with its high spatial resolution and dynamic data range may provide new insights but has not been fully examined in mapping ISA distribution. In this paper, a new variable—Large-scale Impervious Surface Index (LISI)—is proposed to integrate VIIRS-DNB and Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index (NDVI) data for mapping ISA distribution. A regression model was established, in which LISI was used as an independent variable and the reference ISA from Landsat images was a dependent variable. The results indicated a better estimation performance using LISI than using a single VIIRS-DNB or MODIS NDVI variable. The LISI-based approach provides accurate spatial patterns from high values in core urban areas to low values in rural areas, with an overall root mean squared error of 0.11. The LISI-based approach is recommended for fractional ISA estimation in a large area. Full article

► Show Figures

Graphical abstract

11418 KiB

Open AccessArticle

Mapping Two-Dimensional Deformation Field Time-Series of Large Slope by Coupling DInSAR-SBAS with MAI-SBAS

by Liming He, Lixin Wu, Shanjun Liu, Zhi Wang, Chang Su and Sheng-Nan Liu

Remote Sens. 2015, 7(9), 12440-12458; https://doi.org/10.3390/rs70912440 - 22 Sep 2015

Cited by 43 | Viewed by 7200

Abstract

Mapping deformation field time-series, including vertical and horizontal motions, is vital for landslide monitoring and slope safety assessment. However, the conventional differential synthetic aperture radar interferometry (DInSAR) technique can only detect the displacement component in the satellite-to-ground direction, i.e., line-of-sight (LOS) direction [...] Read more.

Mapping deformation field time-series, including vertical and horizontal motions, is vital for landslide monitoring and slope safety assessment. However, the conventional differential synthetic aperture radar interferometry (DInSAR) technique can only detect the displacement component in the satellite-to-ground direction, i.e., line-of-sight (LOS) direction displacement. To overcome this constraint, a new method was developed to obtain the displacement field time series of a slope by coupling DInSAR based small baseline subset approach (DInSAR-SBAS) with multiple-aperture InSAR (MAI) based small baseline subset approach (MAI-SBAS). This novel method has been applied to a set of 11 observations from the phased array type L-band synthetic aperture radar (PALSAR) sensor onboard the advanced land observing satellite (ALOS), spanning from 2007 to 2011, of two large-scale north–south slopes of the largest Asian open-pit mine in the Northeast of China. The retrieved displacement time series showed that the proposed method can detect and measure the large displacements that occurred along the north–south direction, and the gradually changing two-dimensional displacement fields. Moreover, we verified this new method by comparing the displacement results to global positioning system (GPS) measurements. Full article

► Show Figures

Graphical abstract

2192 KiB

Open AccessArticle

Mapping Urban Areas with Integration of DMSP/OLS Nighttime Light and MODIS Data Using Machine Learning Techniques

by Wenlong Jing, Yaping Yang, Xiafang Yue and Xiaodan Zhao

Remote Sens. 2015, 7(9), 12419-12439; https://doi.org/10.3390/rs70912419 - 22 Sep 2015

Cited by 55 | Viewed by 6863

Abstract

Mapping urban areas at global and regional scales is an urgent and crucial task for detecting urbanization and human activities throughout the world and is useful for discerning the influence of urban expansion upon the ecosystem and the surrounding environment. DMSP-OLS stable nighttime [...] Read more.

Mapping urban areas at global and regional scales is an urgent and crucial task for detecting urbanization and human activities throughout the world and is useful for discerning the influence of urban expansion upon the ecosystem and the surrounding environment. DMSP-OLS stable nighttime lights have provided an effective way to monitor human activities on a global scale. Threshold-based algorithms have been widely used for extracting urban areas and estimating urban expansion, but the accuracy can decrease because of the empirical and subjective selection of threshold values. This paper proposes an approach for extracting urban areas with the integration of DMSP-OLS stable nighttime lights and MODIS data utilizing training sample datasets selected from DMSP-OLS and MODIS NDVI based on several simple strategies. Four classification algorithms were implemented for comparison: the classification and regression tree (CART), k-nearest-neighbors (k-NN), support vector machine (SVM), and random forests (RF). A case study was carried out on the eastern part of China, covering 99 cities and 1,027,700 km². The classification results were validated using an independent land cover dataset, and then compared with an existing contextual classification method. The results showed that the new method can achieve results with comparable accuracies, and is easier to implement and less sensitive to the initial thresholds than the contextual method. Among the four classifiers implemented, RF achieved the most stable results and the highest average Kappa. Meanwhile CART produced highly overestimated results compared to the other three classifiers. Although k-NN and SVM tended to produce similar accuracy, less-bright areas around the urban cores seemed to be ignored when using SVM, which led to the underestimation of urban areas. Furthermore, quantity assessment showed that the results produced by k-NN, SVM, and RFs exhibited better agreement in larger cities and low consistency in small cities. Full article

► Show Figures

Graphical abstract

820 KiB

Open AccessArticle

Assimilation of Two Variables Derived from Hyperspectral Data into the DSSAT-CERES Model for Grain Yield and Quality Estimation

by Zhenhai Li, Jihua Wang, Xingang Xu, Chunjiang Zhao, Xiuliang Jin, Guijun Yang and Haikuan Feng

Remote Sens. 2015, 7(9), 12400-12418; https://doi.org/10.3390/rs70912400 - 22 Sep 2015

Cited by 55 | Viewed by 8707

Abstract

The combination of remote sensing and crop growth models has become an effective tool for yield estimation and a potential method for grain quality estimation. In this study, two assimilation variables (derived from a hyperspectral sensor), called leaf area index (LAI) and canopy [...] Read more.

The combination of remote sensing and crop growth models has become an effective tool for yield estimation and a potential method for grain quality estimation. In this study, two assimilation variables (derived from a hyperspectral sensor), called leaf area index (LAI) and canopy nitrogen accumulation (CNA), were jointly used to calibrate the sensitive parameters and initial states of the DSSAT-CERES crop model, to improve simulated output of the grain yield and protein content of winter wheat. The results show that the modified simple ratio (MSR) and normalized difference red edge (NDRE) better estimated LAI and CNA, respectively, compared with the other possible vegetation indices. The integration of both LAI and CNA resulted in a more robust DSSAT-CERES models with than each one alone. The R² and RMSE values, respectively, of the regression between the simulated (using the two assimilation variables method) and measured LAI were 0.828 and 0.494, and for CNA were 0.808 and 20.26 kg N∙ha⁻¹. These two assimilation variables resulted in grain yield and protein content estimates of winter wheat with a high precision and R² and RMSE values of 0.698 and 0.726 ton∙ha⁻¹, and 0.758% and 1.16%, respectively. This study provides a more robust method for estimating the grain yield and protein content of winter wheat based on the integration of the DSSAT-CERES crop model and remote sensing data. Full article

(This article belongs to the Special Issue Remote Sensing in Precision Agriculture)

► Show Figures

Graphical abstract

1727 KiB

Open AccessArticle

Remotely Sensed Nightlights to Map Societal Exposure to Hydrometeorological Hazards

by Agnes Jane Soto Gómez, Giuliano Di Baldassarre, Allan Rodhe and Veijo A. Pohjola

Remote Sens. 2015, 7(9), 12380-12399; https://doi.org/10.3390/rs70912380 - 22 Sep 2015

Cited by 5 | Viewed by 5629

Abstract

This study used remotely sensed maps of nightlights to investigate the etiology of increasing disaster losses from hydrometeorological hazards in a data-scarce area. We explored trends in the probability of occurrence of hazardous events (extreme rainfall) and exposure of the local population as [...] Read more.

This study used remotely sensed maps of nightlights to investigate the etiology of increasing disaster losses from hydrometeorological hazards in a data-scarce area. We explored trends in the probability of occurrence of hazardous events (extreme rainfall) and exposure of the local population as components of risk. The temporal variation of the spatial distribution of exposure to hydrometeorological hazards was studied using nightlight satellite imagery as a proxy. Temporal (yearly) and spatial (1 km) resolution make them more useful than official census data. Additionally, satellite nightlights can track informal (unofficial) human settlements. The study focused on the Samala River catchment in Guatemala. The analyses of disasters, using DesInventar Disaster Information Management System data, showed that fatalities caused by hydrometeorological events have increased. Such an increase in disaster losses can be explained by trends in both: (i) catchment conditions that tend to lead to more frequent hydrometeorological extremes (more frequent occurrence of days with wet conditions); and (ii) increasing human exposure to hazardous events (as observed by amount and intensity of nightlights in areas close to rivers). Our study shows the value of remote sensing data and provides a framework to explore the dynamics of disaster risk when ground data are spatially and temporally limited. Full article

(This article belongs to the Special Issue Remote Sensing in Flood Monitoring and Management)

► Show Figures

Graphical abstract

1967 KiB

Open AccessArticle

Assessment of an Operational System for Crop Type Map Production Using High Temporal and Spatial Resolution Satellite Optical Imagery

by Jordi Inglada, Marcela Arias, Benjamin Tardy, Olivier Hagolle, Silvia Valero, David Morin, Gérard Dedieu, Guadalupe Sepulcre, Sophie Bontemps, Pierre Defourny and Benjamin Koetz

Remote Sens. 2015, 7(9), 12356-12379; https://doi.org/10.3390/rs70912356 - 22 Sep 2015

Cited by 265 | Viewed by 14557

Abstract

Crop area extent estimates and crop type maps provide crucial information for agricultural monitoring and management. Remote sensing imagery in general and, more specifically, high temporal and high spatial resolution data as the ones which will be available with upcoming systems, such as [...] Read more.

Crop area extent estimates and crop type maps provide crucial information for agricultural monitoring and management. Remote sensing imagery in general and, more specifically, high temporal and high spatial resolution data as the ones which will be available with upcoming systems, such as Sentinel-2, constitute a major asset for this kind of application. The goal of this paper is to assess to what extent state-of-the-art supervised classification methods can be applied to high resolution multi-temporal optical imagery to produce accurate crop type maps at the global scale. Five concurrent strategies for automatic crop type map production have been selected and benchmarked using SPOT4 (Take5) and Landsat 8 data over 12 test sites spread all over the globe (four in Europe, four in Africa, two in America and two in Asia). This variety of tests sites allows one to draw conclusions applicable to a wide variety of landscapes and crop systems. The results show that a random forest classifier operating on linearly temporally gap-filled images can achieve overall accuracies above 80% for most sites. Only two sites showed low performances: Madagascar due to the presence of fields smaller than the pixel size and Burkina Faso due to a mix of trees and crops in the fields. The approach is based on supervised machine learning techniques, which need in situ data collection for the training step, but the map production is fully automatic. Full article

(This article belongs to the Special Issue Lessons Learned from the SPOT4 (Take5): Experiment in Preparation for Sentinel-2)

► Show Figures

Graphical abstract

2058 KiB

Open AccessArticle

High-Resolution Mapping of Urban Surface Water Using ZY-3 Multi-Spectral Imagery

by Fangfang Yao, Chao Wang, Di Dong, Jiancheng Luo, Zhanfeng Shen and Kehan Yang

Remote Sens. 2015, 7(9), 12336-12355; https://doi.org/10.3390/rs70912336 - 22 Sep 2015

Cited by 82 | Viewed by 7947

Abstract

Accurate information of urban surface water is important for assessing the role it plays in urban ecosystem services under the content of urbanization and climate change. However, high-resolution monitoring of urban water bodies using remote sensing remains a challenge because of the limitation [...] Read more.

Accurate information of urban surface water is important for assessing the role it plays in urban ecosystem services under the content of urbanization and climate change. However, high-resolution monitoring of urban water bodies using remote sensing remains a challenge because of the limitation of previous water indices and the dark building shadow effect. To address this problem, we proposed an automated urban water extraction method (UWEM) which combines a new water index, together with a building shadow detection method. Firstly, we trained the parameters of UWEM using ZY-3 imagery of Qingdao, China. Then we verified the algorithm using five other sub-scenes (Aksu, Fuzhou, Hanyang, Huangpo and Huainan) ZY-3 imagery. The performance was compared with that of the Normalized Difference Water Index (NDWI). Results indicated that UWEM performed significantly better at the sub-scenes with kappa coefficients improved by 7.87%, 32.35%, 12.64%, 29.72%, 14.29%, respectively, and total omission and commission error reduced by 61.53%, 65.74%, 83.51%, 82.44%, and 74.40%, respectively. Furthermore, UWEM has more stable performances than NDWI’s in a range of thresholds near zero. It reduces the over- and under-estimation issues which often accompany previous water indices when mapping urban surface water under complex environmental conditions. Full article

(This article belongs to the Special Issue Remote Sensing of Water Resources)

► Show Figures

Graphical abstract

1905 KiB

Open AccessArticle

A Phenology-Based Method for Monitoring Woody and Herbaceous Vegetation in Mediterranean Forests from NDVI Time Series

by David Helman, Itamar M. Lensky, Naama Tessler and Yagil Osem

Remote Sens. 2015, 7(9), 12314-12335; https://doi.org/10.3390/rs70912314 - 21 Sep 2015

Cited by 64 | Viewed by 10115

Abstract

We present an efficient method for monitoring woody (i.e., evergreen) and herbaceous (i.e., ephemeral) vegetation in Mediterranean forests at a sub pixel scale from Normalized Difference Vegetation Index (NDVI) time series derived from the Moderate Resolution Imaging Spectroradiometer (MODIS). The method is based [...] Read more.

We present an efficient method for monitoring woody (i.e., evergreen) and herbaceous (i.e., ephemeral) vegetation in Mediterranean forests at a sub pixel scale from Normalized Difference Vegetation Index (NDVI) time series derived from the Moderate Resolution Imaging Spectroradiometer (MODIS). The method is based on the distinct development periods of those vegetation components. In the dry season, herbaceous vegetation is absent or completely dry in Mediterranean forests. Thus the mean NDVI in the dry season was attributed to the woody vegetation (NDVI_W). A constant NDVI value was assumed for soil background during this period. In the wet season, changes in NDVI were attributed to the development of ephemeral herbaceous vegetation in the forest floor and its maximum value to the peak green cover (NDVI_H). NDVI_W and NDVI_H agreed well with field estimates of leaf area index and fraction of vegetation cover in two differently structured Mediterranean forests. To further assess the method’s assumptions, understory NDVI was retrieved form MODIS Bidirectional Reflectance Distribution Function (BRDF) data and compared with NDVI_H. After calibration, leaf area index and woody and herbaceous vegetation covers were assessed for those forests. Applicability for pre- and post-fire monitoring is presented as a potential use of this method for forest management in Mediterranean-climate regions. Full article

► Show Figures

Graphical abstract

1476 KiB

Open AccessArticle

World’s Largest Macroalgal Blooms Altered Phytoplankton Biomass in Summer in the Yellow Sea: Satellite Observations

by Qianguo Xing, Chuanmin Hu, Danling Tang, Liqiao Tian, Shilin Tang, Xiao Hua Wang, Mingjing Lou and Xuelu Gao

Remote Sens. 2015, 7(9), 12297-12313; https://doi.org/10.3390/rs70912297 - 21 Sep 2015

Cited by 60 | Viewed by 7043

Abstract

Since 2008, the world’s largest blooms of the green macroalgae, Ulva prolifera, have occurred every summer in the Yellow Sea, posing the question of whether these macroalgal blooms (MABs) have changed the phytoplankton biomass due to their perturbations of nutrient dynamics. We [...] Read more.

Since 2008, the world’s largest blooms of the green macroalgae, Ulva prolifera, have occurred every summer in the Yellow Sea, posing the question of whether these macroalgal blooms (MABs) have changed the phytoplankton biomass due to their perturbations of nutrient dynamics. We have attempted to address this question using long-term Moderate Resolution Imaging Spectroradiometer (MODIS) observations. A new MODIS monthly time-series of chlorophyll-a concentrations (Chl-a, an index of phytoplankton biomass) was generated after removing the macroalgae-contaminated pixels that were characterized by unexpectedly high values in the daily Chl-a products. Compared with Chl-a during July of 2002–2006 (the pre-MAB period), Chl-a during July of 2008–2012 (the MAB period) exhibited significant increases in the offshore Yellow Sea waters (rich in macroalgae), with mean Chl-a increased by 98% from 0.64 µg/L to 1.26 µg/L in the study region. In contrast, no significant Chl-a changes were observed during June between the two periods. After analyzing sea surface temperature, photosynthetically available radiation, and nutrient availability, we speculate that the observed Chl-a changes are due to nutrient competition between macroalgae and phytoplankton: during the MAB period, the fast-growing macroalgae would uptake the increased nutrients from the origin of Jiangsu Shoal; thus, the nutrients available to phytoplankton were reduced, leading to no apparent increases in biomass in the offshore Yellow Sea in June. Full article

(This article belongs to the Special Issue Remote Sensing of Biogeochemical Cycles)

► Show Figures

Graphical abstract

1197 KiB

Open AccessArticle

Mineral Classification of Makhtesh Ramon in Israel Using Hyperspectral Longwave Infrared (LWIR) Remote-Sensing Data

by Gila Notesco, Yaron Ogen and Eyal Ben-Dor

Remote Sens. 2015, 7(9), 12282-12296; https://doi.org/10.3390/rs70912282 - 21 Sep 2015

Cited by 27 | Viewed by 7498

Abstract

Hyperspectral remote-sensing techniques offer an efficient procedure for mineral mapping, with a unique hyperspectral remote-sensing fingerprint in the longwave infrared spectral region enabling identification of the most abundant minerals in the continental crust—quartz and feldspars. This ability was examined by acquiring airborne data [...] Read more.

Hyperspectral remote-sensing techniques offer an efficient procedure for mineral mapping, with a unique hyperspectral remote-sensing fingerprint in the longwave infrared spectral region enabling identification of the most abundant minerals in the continental crust—quartz and feldspars. This ability was examined by acquiring airborne data with the AisaOWL sensor over the Makhtesh Ramon area in Israel. The at-sensor radiance measured from each pixel in a longwave infrared image represents the emissivity, expressing chemical and physical properties such as surface mineralogy, and the atmospheric contribution which is expressed differently during the day and at night. Therefore, identifying similar features in day and night radiance enabled identifying the major minerals in the surface—quartz, silicates (feldspars and clay minerals), gypsum and carbonates—and mapping their spatial distribution. Mineral identification was improved by applying the radiance of an in situ surface that is featureless for minerals but distinctive for the atmospheric contribution as a gain spectrum to each pixel in the image, reducing the atmospheric contribution and emphasizing the mineralogical features. The results were in agreement with the mineralogy of selected rock samples collected from the study area as derived from laboratory X-ray diffraction analysis. The resulting mineral map of the major minerals in the surface was in agreement with the geological map of the area. Full article

(This article belongs to the Special Issue Remote Sensing in Geology)

► Show Figures

Graphical abstract

2397 KiB

Open AccessArticle

Characteristics of Surface Deformation Detected by X-band SAR Interferometry over Sichuan-Tibet Grid Connection Project Area, China

by Yunshan Meng, Hengxing Lan, Langping Li, Yuming Wu and Quanwen Li

Remote Sens. 2015, 7(9), 12265-12281; https://doi.org/10.3390/rs70912265 - 21 Sep 2015

Cited by 18 | Viewed by 5236

Abstract

The Sichuan-Tibet grid connection project is a national key project implemented in accordance with the developmental needs of Tibet and the living requirements of 700 thousand local residents. It is the first grid project with special high voltage that passes through eastern margin [...] Read more.

The Sichuan-Tibet grid connection project is a national key project implemented in accordance with the developmental needs of Tibet and the living requirements of 700 thousand local residents. It is the first grid project with special high voltage that passes through eastern margin of the Tibetan Plateau. The ground deformation due to widely distributed landslides and debris flow in this area is the major concern to the safety of the project. The multi-temporal interferometry technique is applied to retrieve the surface deformation information using high resolution X-band SAR imagery. The time series of surface deformation is obtained through the sequential high spatial and temporal resolution TerraSAR images (20 scenes of X-band TerraSAR SLC images acquired from 5 January 2014 to 12 December 2014). The results have been correlated with the permafrost activities and intensive precipitation. They show that the study area is prone to slow to moderate ground motion with the range of −30 to +30 mm/year. Seasonal movement is observed due to the freeze-thaw cycle effect and intensive precipitation weather condition. Typical region analysis suggests that the deformation rate tends to increase dramatically during the late spring and late autumn while slightly during the winter time. The correlations of surface deformations with these two main trigger factors were further discussed. The deformation curves of persistent scatterers in the study area showing the distinct seasonal characteristics coincide well with the effect of freeze-thaw cycle and intensive precipitation. The movement occurring at late spring is dominated by the freeze-thaw cycle which is a common phenomenon in such a high-elevated area as the Tibetan Plateau. Intensive precipitation plays more important role in triggering landsides in the summer season. The combining effect of both factors results in fast slope movement in May. The results also suggest that the movement often occur at the middle to toe part of the slope where the combining effect of freeze-thaw cycle and precipitation plays an important role. Therefore the majority of transmission towers are not threatened significantly by geological hazards since they are located on the higher elevation which is beyond the boundary of slope movement. The comparison between field observations and the persistent scatterers interferometry (PSI) results reveals good agreement in obvious deformation accumulations. High uncertainty still exists due to issue of SAR imagery quality and the persistent scatterers interferometry technique. Nevertheless, this study provides an insight into understanding the characteristics of ground movement trend in the complicated eastern Tibet area. Full article

► Show Figures

Graphical abstract

6228 KiB

Open AccessArticle

SPOT-4 (Take 5): Simulation of Sentinel-2 Time Series on 45 Large Sites

by Olivier Hagolle, Sylvia Sylvander, Mireille Huc, Martin Claverie, Dominique Clesse, Cécile Dechoz, Vincent Lonjou and Vincent Poulain

Remote Sens. 2015, 7(9), 12242-12264; https://doi.org/10.3390/rs70912242 - 21 Sep 2015

Cited by 69 | Viewed by 8513

Abstract

This paper presents the SPOT-4 (Take 5) experiment, aimed at providing time series of optical images simulating the repetitivity, the resolution and the large swath of Sentinel-2 images. The aim was to help users set up and test their applications and methods, before [...] Read more.

This paper presents the SPOT-4 (Take 5) experiment, aimed at providing time series of optical images simulating the repetitivity, the resolution and the large swath of Sentinel-2 images. The aim was to help users set up and test their applications and methods, before Sentinel-2 mission data become available. In 2016, when both Sentinel-2 satellites are operational, and for at least fifteen years, users will have access to high resolution time series of images systematically acquired every five days, over the whole Earth land surfaces. Thanks to Sentinel-2’s high revisit frequency, a given surface should be observed without clouds at least once a month, except in the most cloudy periods and regions. In 2013, the Centre National d’Etudes Spatiales (CNES) lowered the orbit altitude of SPOT-4, to place it on a five-day repeat cycle orbit for a duration of five months. This experiment started on 31 January 2013 and lasted until 19 June 2013. SPOT-4 images were acquired every fifth day, over 45 sites scattered in nearly all continents and covering very diverse biomes for various applications. Two ortho-rectified products were delivered for each acquired image that was not fully cloudy, expressed either as top of atmosphere reflectance (Level 1C) or as surface reflectance (Level 2A). An extensive validation campaign was held to check the performances of these products with regard to the multi-temporal registration, the quality of cloud masks, the accuracy of aerosol optical thickness estimates and the quality of surface reflectances. Despite high a priori geo-location errors, it was possible to register the images with an accuracy better than 0.5 pixels in the large majority of cases. Despite the lack of a blue band on the SPOT-4 satellite, the cloud and shadow detection yielded good results, while the aerosol optical thickness was measured with a root mean square error better than 0.06. The surface reflectances after atmospheric correction were compared with in situ data and other satellite data showing little bias and the standard deviation of surface reflectance errors in the range (0.01–0.02). The Take 5 experiment is being repeated in 2015 with the SPOT-5 satellite with an enhanced resolution. Full article

(This article belongs to the Special Issue Lessons Learned from the SPOT4 (Take5): Experiment in Preparation for Sentinel-2)

► Show Figures

Graphical abstract

6940 KiB

Open AccessArticle

Quality Assessment of S-NPP VIIRS Land Surface Temperature Product

by Yuling Liu, Yunyue Yu, Peng Yu, Frank M. Göttsche and Isabel F. Trigo

Remote Sens. 2015, 7(9), 12215-12241; https://doi.org/10.3390/rs70912215 - 21 Sep 2015

Cited by 57 | Viewed by 8064

Abstract

The VIIRS Land Surface Temperature (LST) Environmental Data Record (EDR) has reached validated (V1 stage) maturity in December 2014. This study compares VIIRS v1 LST with the ground in situ observations and with heritage LST product from MODIS Aqua and AATSR. Comparisons against [...] Read more.

The VIIRS Land Surface Temperature (LST) Environmental Data Record (EDR) has reached validated (V1 stage) maturity in December 2014. This study compares VIIRS v1 LST with the ground in situ observations and with heritage LST product from MODIS Aqua and AATSR. Comparisons against U.S. SURFRAD ground observations indicate a similar accuracy among VIIRS, MODIS and AATSR LST, in which VIIRS LST presents an overall accuracy of −0.41 K and precision of 2.35 K. The result over arid regions in Africa suggests that VIIRS and MODIS underestimate the LST about 1.57 K and 2.97 K, respectively. The cross comparison indicates an overall close LST estimation between VIIRS and MODIS. In addition, a statistical method is used to quantify the VIIRS LST retrieval uncertainty taking into account the uncertainty from the surface type input. Some issues have been found as follows: (1) Cloud contamination, particularly the cloud detection error over a snow/ice surface, shows significant impacts on LST validation; (2) Performance of the VIIRS LST algorithm is strongly dependent on a correct classification of the surface type; (3) The VIIRS LST quality can be degraded when significant brightness temperature difference between the two split window channels is observed; (4) Surface type dependent algorithm exhibits deficiency in correcting the large emissivity variations within a surface type. Full article

(This article belongs to the Collection Visible Infrared Imaging Radiometers and Applications)

► Show Figures

Graphical abstract

2960 KiB

Open AccessArticle

Retrieval of Mangrove Aboveground Biomass at the Individual Species Level with WorldView-2 Images

by Yuanhui Zhu, Kai Liu, Lin Liu, Shugong Wang and Hongxing Liu

Remote Sens. 2015, 7(9), 12192-12214; https://doi.org/10.3390/rs70912192 - 21 Sep 2015

Cited by 101 | Viewed by 8356

Abstract

Previous research studies have demonstrated that the relationship between remote sensing-derived parameters and aboveground biomass (AGB) could vary across different species types. However, there are few studies that calibrate reliable statistical models for mangrove AGB. This study quantifies the differences of accuracy in [...] Read more.

Previous research studies have demonstrated that the relationship between remote sensing-derived parameters and aboveground biomass (AGB) could vary across different species types. However, there are few studies that calibrate reliable statistical models for mangrove AGB. This study quantifies the differences of accuracy in AGB estimation between the results obtained with and without the consideration of species types using Worldview-2 images and field surveys. A Back Propagation Artificial Neural Network (BP ANN) based model is developed for the accurate estimation of uneven-aged and dense mangrove forest biomass. The contributions of the input variables are further quantified using a “Weights” method based on BP ANN model. Two types of mangrove species, Sonneratia apetala (S. apetala) and Kandelia candel (K. candel), are examined in this study. Results show that the species type information is the most important variable for AGB estimation, and the red edge band and the associated vegetation indices from WorldView-2 images are more sensitive to mangrove AGB than other bands and vegetation indices. The RMSE of biomass estimation at the incorporation of species as a dummy variable is 19.17% lower than that of the mixed species level. The results demonstrate that species type information obtained from the WorldView-2 images can significantly improve of the accuracy of the biomass estimation. Full article

(This article belongs to the Special Issue Remote Sensing of Mangroves: Observation and Monitoring)

► Show Figures

Graphical abstract

7171 KiB

Open AccessArticle

Comparative Analysis of MODIS Time-Series Classification Using Support Vector Machines and Methods Based upon Distance and Similarity Measures in the Brazilian Cerrado-Caatinga Boundary

by Natanael Antunes Abade, Osmar Abílio de Carvalho Júnior, Renato Fontes Guimarães and Sandro Nunes De Oliveira

Remote Sens. 2015, 7(9), 12160-12191; https://doi.org/10.3390/rs70912160 - 18 Sep 2015

Cited by 39 | Viewed by 8963

Abstract

We have mapped the primary native and exotic vegetation that occurs in the Cerrado-Caatinga transition zone in Central Brazil using MODIS-NDVI time series (product MOD09Q1) data over a two-year period (2011–2013). Our methodology consists of the following steps: (a) the development of a [...] Read more.

We have mapped the primary native and exotic vegetation that occurs in the Cerrado-Caatinga transition zone in Central Brazil using MODIS-NDVI time series (product MOD09Q1) data over a two-year period (2011–2013). Our methodology consists of the following steps: (a) the development of a three-dimensional cube composed of the NDVI-MODIS time series; (b) the removal of noise; (c) the selection of reference temporal curves and classification using similarity and distance measures; and (d) classification using support vector machines (SVMs). We evaluated different temporal classifications using similarity and distance measures of land use and land cover considering several combinations of attributes. Among the classification using distance and similarity measures, the best result employed the Euclidean distance with the NDVI-MODIS data by considering more than one reference temporal curve per class and adopting six mapping classes. In the majority of tests, the SVM classifications yielded better results than other methods. The best result among all the tested methods was obtained using the SVM classifier with a fourth-degree polynomial kernel; an overall accuracy of 80.75% and a Kappa coefficient of 0.76 were obtained. Our results demonstrate the potential of vegetation studies in semiarid ecosystems using time-series data. Full article

► Show Figures

Graphical abstract

5680 KiB

Open AccessArticle

Rooftop Surface Temperature Analysis in an Urban Residential Environment

by Qunshan Zhao, Soe W. Myint, Elizabeth A. Wentz and Chao Fan

Remote Sens. 2015, 7(9), 12135-12159; https://doi.org/10.3390/rs70912135 - 18 Sep 2015

Cited by 57 | Viewed by 12582

Abstract

The urban heat island (UHI) phenomenon is a significant worldwide problem caused by rapid population growth and associated urbanization. The UHI effect exacerbates heat waves during the summer, increases energy and water consumption, and causes the high risk of heat-related morbidity and mortality. [...] Read more.

The urban heat island (UHI) phenomenon is a significant worldwide problem caused by rapid population growth and associated urbanization. The UHI effect exacerbates heat waves during the summer, increases energy and water consumption, and causes the high risk of heat-related morbidity and mortality. UHI mitigation efforts have increasingly relied on wisely designing the urban residential environment such as using high albedo rooftops, green rooftops, and planting trees and shrubs to provide canopy coverage and shading. Thus, strategically designed residential rooftops and their surrounding landscaping have the potential to translate into significant energy, long-term cost savings, and health benefits. Rooftop albedo, material, color, area, slope, height, aspect and nearby landscaping are factors that potentially contribute. To extract, derive, and analyze these rooftop parameters and outdoor landscaping information, high resolution optical satellite imagery, LIDAR (light detection and ranging) point clouds and thermal imagery are necessary. Using data from the City of Tempe AZ (a 2010 population of 160,000 people), we extracted residential rooftop footprints and rooftop configuration parameters from airborne LIDAR point clouds and QuickBird satellite imagery (2.4 m spatial resolution imagery). Those parameters were analyzed against surface temperature data from the MODIS/ASTER airborne simulator (MASTER). MASTER images provided fine resolution (7 m) surface temperature data for residential areas during daytime and night time. Utilizing these data, ordinary least squares (OLS) regression was used to evaluate the relationships between residential building rooftops and their surface temperature in urban environment. The results showed that daytime rooftop temperature was closely related to rooftop spectral attributes, aspect, slope, and surrounding trees. Night time temperature was only influenced by rooftop spectral attributes and slope. Full article

► Show Figures

Graphical abstract

2555 KiB

Open AccessArticle

To Fill or Not to Fill: Sensitivity Analysis of the Influence of Resolution and Hole Filling on Point Cloud Surface Modeling and Individual Rockfall Event Detection

by Michael J. Olsen, Joseph Wartman, Martha McAlister, Hamid Mahmoudabadi, Matt S. O’Banion, Lisa Dunham and Keith Cunningham

Remote Sens. 2015, 7(9), 12103-12134; https://doi.org/10.3390/rs70912103 - 18 Sep 2015

Cited by 31 | Viewed by 7120

Abstract

Monitoring unstable slopes with terrestrial laser scanning (TLS) has been proven effective. However, end users still struggle immensely with the efficient processing, analysis, and interpretation of the massive and complex TLS datasets. Two recent advances described in this paper now improve the ability [...] Read more.

Monitoring unstable slopes with terrestrial laser scanning (TLS) has been proven effective. However, end users still struggle immensely with the efficient processing, analysis, and interpretation of the massive and complex TLS datasets. Two recent advances described in this paper now improve the ability to work with TLS data acquired on steep slopes. The first is the improved processing of TLS data to model complex topography and fill holes. This processing step results in a continuous topographic surface model that seamlessly characterizes the rock and soil surface. The second is an advance in the automated interpretation of the surface model in such a way that a magnitude and frequency relationship of rockfall events can be quantified, which can be used to assess maintenance strategies and forecast costs. The approach is applied to unstable highway slopes in the state of Alaska, U.S.A. to evaluate its effectiveness. Further, the influence of the selected model resolution and degree of hole filling on the derived slope metrics were analyzed. In general, model resolution plays a pivotal role in the ability to detect smaller rockfall events when developing magnitude-frequency relationships. The total volume estimates are also influenced by model resolution, but were comparatively less sensitive. In contrast, hole filling had a noticeable effect on magnitude-frequency relationships but to a lesser extent than modeling resolution. However, hole filling yielded a modest increase in overall volumetric quantity estimates. Optimal analysis results occur when appropriately balancing high modeling resolution with an appropriate level of hole filling. Full article

(This article belongs to the Special Issue Use of LiDAR and 3D point clouds in Geohazards)

► Show Figures

Graphical abstract

2578 KiB

Open AccessArticle

Multi-Temporal Landsat Images and Ancillary Data for Land Use/Cover Change (LULCC) Detection in the Southwest of Burkina Faso, West Africa

by Benewinde J-B. Zoungrana, Christopher Conrad, Leonard K. Amekudzi, Michael Thiel, Evariste Dapola Da, Gerald Forkuor and Fabian Löw

Remote Sens. 2015, 7(9), 12076-12102; https://doi.org/10.3390/rs70912076 - 18 Sep 2015

Cited by 49 | Viewed by 8699

Abstract

Accurate quantification of land use/cover change (LULCC) is important for efficient environmental management, especially in regions that are extremely affected by climate variability and continuous population growth such as West Africa. In this context, accurate LULC classification and statistically sound change area estimates [...] Read more.

Accurate quantification of land use/cover change (LULCC) is important for efficient environmental management, especially in regions that are extremely affected by climate variability and continuous population growth such as West Africa. In this context, accurate LULC classification and statistically sound change area estimates are essential for a better understanding of LULCC processes. This study aimed at comparing mono-temporal and multi-temporal LULC classifications as well as their combination with ancillary data and to determine LULCC across the heterogeneous landscape of southwest Burkina Faso using accurate classification results. Landsat data (1999, 2006 and 2011) and ancillary data served as input features for the random forest classifier algorithm. Five LULC classes were identified: woodland, mixed vegetation, bare surface, water and agricultural area. A reference database was established using different sources including high-resolution images, aerial photo and field data. LULCC and LULC classification accuracies, area and area uncertainty were computed based on the method of adjusted error matrices. The results revealed that multi-temporal classification significantly outperformed those solely based on mono-temporal data in the study area. However, combining mono-temporal imagery and ancillary data for LULC classification had the same accuracy level as multi-temporal classification which is an indication that this combination is an efficient alternative to multi-temporal classification in the study region, where cloud free images are rare. The LULCC map obtained had an overall accuracy of 92%. Natural vegetation loss was estimated to be 17.9% ± 2.5% between 1999 and 2011. The study area experienced an increase in agricultural area and bare surface at the expense of woodland and mixed vegetation, which attests to the ongoing deforestation. These results can serve as means of regional and global land cover products validation, as they provide a new validated data set with uncertainty estimates in heterogeneous ecosystems prone to classification errors. Full article

(This article belongs to the Special Issue Carbon Cycle, Global Change, and Multi-Sensor Remote Sensing)

► Show Figures

Graphical abstract

3070 KiB

Open AccessArticle

Evaluation of Medium Spatial Resolution BRDF-Adjustment Techniques Using Multi-Angular SPOT4 (Take5) Acquisitions

by Martin Claverie, Eric Vermote, Belen Franch, Tao He, Olivier Hagolle, Mohamed Kadiri and Jeff Masek

Remote Sens. 2015, 7(9), 12057-12075; https://doi.org/10.3390/rs70912057 - 18 Sep 2015

Cited by 20 | Viewed by 5749

Abstract

High-resolution sensor Surface Reflectance (SR) data are affected by surface anisotropy but are difficult to adjust because of the low temporal frequency of the acquisitions and the low angular sampling. This paper evaluates five high spatial resolution Bidirectional Reflectance Distribution Function (BRDF) adjustment [...] Read more.

High-resolution sensor Surface Reflectance (SR) data are affected by surface anisotropy but are difficult to adjust because of the low temporal frequency of the acquisitions and the low angular sampling. This paper evaluates five high spatial resolution Bidirectional Reflectance Distribution Function (BRDF) adjustment techniques. The evaluation is based on the noise level of the SR Time Series (TS) corrected to a normalized geometry (nadir view, 45° sun zenith angle) extracted from the multi-angular acquisitions of SPOT4 over three study areas (one in Arizona, two in France) during the five-month SPOT4 (Take5) experiment. Two uniform techniques (Cst, for Constant, and Av, for Average), relying on the Vermote–Justice–Bréon (VJB) BRDF method, assume no variation in space of the BRDF shape. Two methods (VI-dis, for NDVI-based disaggregation and LC-dis, for Land-Cover based disaggregation) are based on disaggregation of the MODIS-derived BRDF VJB parameters using vegetation index and land cover, respectively. The last technique (LUM, for Look-Up Map) relies on the MCD43 MODIS BRDF products and a crop type data layer. The VI-dis technique produced the lowest level of noise corresponding to the most effective adjustment: reduction from directional to normalized SR TS noises by 40% and 50% on average, for red and near-infrared bands, respectively. The uniform techniques displayed very good results, suggesting that a simple and uniform BRDF-shape assumption is good enough to adjust the BRDF in such geometric configuration (the view zenith angle varies from nadir to 25°). The most complex techniques relying on land cover (LC-dis and LUM) displayed contrasting results depending on the land cover. Full article

(This article belongs to the Special Issue Lessons Learned from the SPOT4 (Take5): Experiment in Preparation for Sentinel-2)

► Show Figures

Graphical abstract

4076 KiB

Open AccessArticle

Temporal Monitoring of the Soil Freeze-Thaw Cycles over a Snow-Covered Surface by Using Air-Launched Ground-Penetrating Radar

by Khan Zaib Jadoon, Lutz Weihermüller, Matthew F. McCabe, Davood Moghadas, Harry Vereecken and Sebastíen Lambot

Remote Sens. 2015, 7(9), 12041-12056; https://doi.org/10.3390/rs70912041 - 18 Sep 2015

Cited by 15 | Viewed by 6845

Abstract

We tested an off-ground ground-penetrating radar (GPR) system at a fixed location over a bare agricultural field to monitor the soil freeze-thaw cycles over a snow-covered surface. The GPR system consisted of a monostatic horn antenna combined with a vector network analyzer, providing [...] Read more.

We tested an off-ground ground-penetrating radar (GPR) system at a fixed location over a bare agricultural field to monitor the soil freeze-thaw cycles over a snow-covered surface. The GPR system consisted of a monostatic horn antenna combined with a vector network analyzer, providing an ultra-wideband stepped-frequency continuous-wave radar. An antenna calibration experiment was performed to filter antenna and back scattered effects from the raw GPR data. Near the GPR setup, sensors were installed in the soil to monitor the dynamics of soil temperature and dielectric permittivity at different depths. The soil permittivity was retrieved via inversion of time domain GPR data focused on the surface reflection. Significant effects of soil dynamics were observed in the time-lapse GPR, temperature and dielectric permittivity measurements. In particular, five freeze and thaw events were clearly detectable, indicating that the GPR signals respond to the contrast between the dielectric permittivity of frozen and thawed soil. The GPR-derived permittivity was in good agreement with sensor observations. Overall, the off-ground nature of the GPR system permits non-invasive time-lapse observation of the soil freeze-thaw dynamics without disturbing the structure of the snow cover. The proposed method shows promise for the real-time mapping and monitoring of the shallow frozen layer at the field scale. Full article

► Show Figures

Graphical abstract

2390 KiB

Open AccessArticle

Assessing the Suitability of Future Multi- and Hyperspectral Satellite Systems for Mapping the Spatial Distribution of Norway Spruce Timber Volume

by Sascha Nink, Joachim Hill, Henning Buddenbaum, Johannes Stoffels, Thomas Sachtleber and Joachim Langshausen

Remote Sens. 2015, 7(9), 12009-12040; https://doi.org/10.3390/rs70912009 - 18 Sep 2015

Cited by 19 | Viewed by 5719

Abstract

The availability of accurate and timely information on timber volume is important for supporting operational forest management. One option is to combine statistical concepts (e.g., small area estimates) with specifically designed terrestrial sampling strategies to provide estimations also on the level of administrative [...] Read more.

The availability of accurate and timely information on timber volume is important for supporting operational forest management. One option is to combine statistical concepts (e.g., small area estimates) with specifically designed terrestrial sampling strategies to provide estimations also on the level of administrative units such as forest districts. This may suffice for economic assessments, but still fails to provide spatially explicit information on the distribution of timber volume within these management units. This type of information, however, is needed for decision-makers to design and implement appropriate management operations. The German federal state of Rhineland-Palatinate is currently implementing an object-oriented database that will also allow the direct integration of Earth observation data products. This work analyzes the suitability of forthcoming multi- and hyperspectral satellite imaging systems for producing local distribution maps for timber volume of Norway spruce, one of the most economically important tree species. In combination with site-specific inventory data, fully processed hyperspectral data sets (HyMap) were used to simulate datasets of the forthcoming EnMAP and Sentinel-2 systems to establish adequate models for estimating timber volume maps. The analysis included PLS regression and the k-NN method. Root Mean Square Errors between 21.6% and 26.5% were obtained, where k-NN performed slightly better than PLSR. It was concluded that the datasets of both simulated sensor systems fulfill accuracy requirements to support local forest management operations and could be used in synergy. Sentinel-2 can provide meaningful volume distribution maps in higher geometric resolution, while EnMAP, due to its hyperspectral coverage, can contribute complementary information, e.g., on biophysical conditions. Full article

► Show Figures

Graphical abstract

1381 KiB

Open AccessArticle

Remote Sensing Based Two-Stage Sampling for Accuracy Assessment and Area Estimation of Land Cover Changes

by Heinz Gallaun, Martin Steinegger, Roland Wack, Mathias Schardt, Birgit Kornberger and Ursula Schmitt

Remote Sens. 2015, 7(9), 11992-12008; https://doi.org/10.3390/rs70911992 - 18 Sep 2015

Cited by 14 | Viewed by 5794

Abstract

Land cover change processes are accelerating at the regional to global level. The remote sensing community has developed reliable and robust methods for wall-to-wall mapping of land cover changes; however, land cover changes often occur at rates below the mapping errors. In the [...] Read more.

Land cover change processes are accelerating at the regional to global level. The remote sensing community has developed reliable and robust methods for wall-to-wall mapping of land cover changes; however, land cover changes often occur at rates below the mapping errors. In the current publication, we propose a cost-effective approach to complement wall-to-wall land cover change maps with a sampling approach, which is used for accuracy assessment and accurate estimation of areas undergoing land cover changes, including provision of confidence intervals. We propose a two-stage sampling approach in order to keep accuracy, efficiency, and effort of the estimations in balance. Stratification is applied in both stages in order to gain control over the sample size allocated to rare land cover change classes on the one hand and the cost constraints for very high resolution reference imagery on the other. Bootstrapping is used to complement the accuracy measures and the area estimates with confidence intervals. The area estimates and verification estimations rely on a high quality visual interpretation of the sampling units based on time series of satellite imagery. To demonstrate the cost-effective operational applicability of the approach we applied it for assessment of deforestation in an area characterized by frequent cloud cover and very low change rate in the Republic of Congo, which makes accurate deforestation monitoring particularly challenging. Full article

► Show Figures

Graphical abstract

2125 KiB

Open AccessArticle

The Use of Multi-Temporal Landsat Imageries in Detecting Seasonal Crop Abandonment

by Noryusdiana Mohamad Yusoff and Farrah Melissa Muharam

Remote Sens. 2015, 7(9), 11974-11991; https://doi.org/10.3390/rs70911974 - 18 Sep 2015

Cited by 27 | Viewed by 7052

Abstract

Abandonment of agricultural land is a global issue and a waste of resources and brings a negative impact on the local economy. It is also one of the key contributing factors in certain environmental problems, such as soil erosion and carbon sequestration. In [...] Read more.

Abandonment of agricultural land is a global issue and a waste of resources and brings a negative impact on the local economy. It is also one of the key contributing factors in certain environmental problems, such as soil erosion and carbon sequestration. In order to address such problems related to land abandonment, their spatial distribution must first be precisely identified. Hence, this study proposes the use of multi-temporal Landsat imageries, together with crop phenology information and an object-oriented classification technique, to identify abandoned paddy and rubber areas. Results indicate that Landsat time-series images were highly beneficial and, in fact, essential in identifying abandoned paddy and rubber areas, particularly due to the unique phenology of these seasonal crops. To differentiate between abandoned and non-abandoned paddy areas, a minimum of three time-series images, mainly acquired during the planting seasons is required. For rubber, multi-temporal images should be examined in order to confirm the wintering season. The study demonstrates the advantages of using multi-temporal Landsat imageries in identifying abandoned paddy and rubber areas wherein an accuracy of 93.33% ± 14% and 83.33% ± 1%, respectively, were achieved. Full article

(This article belongs to the Special Issue Mapping the Dynamics of Forest Plantations in Tropical and Subtropical Regions from Multi-Source Remote Sensing)

► Show Figures

Graphical abstract

4132 KiB

Open AccessArticle

Rapid Response to a Typhoon-Induced Flood with an SAR-Derived Map of Inundated Areas: Case Study and Validation

by Hsiao-Wei Chung, Cheng-Chien Liu, I-Fan Cheng, Yun-Ruei Lee and Ming-Chang Shieh

Remote Sens. 2015, 7(9), 11954-11973; https://doi.org/10.3390/rs70911954 - 18 Sep 2015

Cited by 34 | Viewed by 9658

Abstract

We report the successful case of a rapid response to a flash flood in I-Lan County of Taiwan with a map of inundated areas derived from COSMO-SkyMed 1 radar satellite imagery within 24 hours. The flood was caused by the intensive precipitation brought [...] Read more.

We report the successful case of a rapid response to a flash flood in I-Lan County of Taiwan with a map of inundated areas derived from COSMO-SkyMed 1 radar satellite imagery within 24 hours. The flood was caused by the intensive precipitation brought by Typhoon Soulik in July 2013. Based on the ensemble forecasts of trajectory, an urgent request of spaceborne SAR imagery was made 24 hours before Typhoon Soulik made landfall. Two COSMO-SkyMed images were successfully acquired when the center of Typhoon Soulik had just crossed the northern part of Taiwan. The standard level-1b product (radiometric-corrected, geometric-calibrated and orthorectified image) was generated by using the off-the-shelf SARscape software. Following the same approach used with the Expert Landslide and Shadow Area Delineating System, the regional threshold of each tile image was determined to delineate still water surface and quasi-inundated areas in a fully-automatic manner. The results were overlaid on a digital elevation model, and the same tile was visually compared to an optical image taken by Formosat-2 before this event. With this ancillary information, the inundated areas were accurately and quickly identified. The SAR-derived map of inundated areas was published on a web-based platform powered by Google Earth within 24 hours, with the aim of supporting the decision-making process of disaster prevention and mitigation. A detailed validation was made afterwards by comparing the map with in situ data of the water levels at 17 stations. The results demonstrate the feasibility of rapidly responding to a typhoon-induced flood with a spaceborne SAR-derived map of inundated areas. A standard operating procedure was derived from this work and followed by the Water Hazard Mitigation Center of the Water Resources Agency, Taiwan, in subsequent typhoon seasons, such as Typhoon Trami (August, 2013) and Typhoon Soudelor (August, 2015). Full article

(This article belongs to the Special Issue Remote Sensing in Flood Monitoring and Management)

► Show Figures

Graphical abstract

2011 KiB

Open AccessArticle

The Impact of the Calibration Method on the Accuracy of Point Clouds Derived Using Unmanned Aerial Vehicle Multi-View Stereopsis

by Steve Harwin, Arko Lucieer and Jon Osborn

Remote Sens. 2015, 7(9), 11933-11953; https://doi.org/10.3390/rs70911933 - 17 Sep 2015

Cited by 153 | Viewed by 12728

Abstract

In unmanned aerial vehicle (UAV) photogrammetric surveys, the cameracan be pre-calibrated or can be calibrated "on-the-job" using structure-from-motion anda self-calibrating bundle adjustment. This study investigates the impact on mapping accuracyof UAV photogrammetric survey blocks, the bundle adjustment and the 3D reconstructionprocess under a [...] Read more.

In unmanned aerial vehicle (UAV) photogrammetric surveys, the cameracan be pre-calibrated or can be calibrated "on-the-job" using structure-from-motion anda self-calibrating bundle adjustment. This study investigates the impact on mapping accuracyof UAV photogrammetric survey blocks, the bundle adjustment and the 3D reconstructionprocess under a range of typical operating scenarios for centimetre-scale natural landformmapping (in this case, a coastal cliff). We demonstrate the sensitivity of the process tocalibration procedures and the need for careful accuracy assessment. For this investigation, vertical (nadir or near-nadir) and oblique photography were collected with 80%–90%overlap and with accurately-surveyed (σ ≤ 2 mm) and densely-distributed ground control.This allowed various scenarios to be tested and the impact on mapping accuracy to beassessed. This paper presents the results of that investigation and provides guidelines thatwill assist with operational decisions regarding camera calibration and ground control forUAV photogrammetry. The results indicate that the use of either a robust pre-calibration ora robust self-calibration results in accurate model creation from vertical-only photography,and additional oblique photography may improve the results. The results indicate thatif a dense array of high accuracy ground control points are deployed and the UAVphotography includes both vertical and oblique images, then either a pre-calibration or anon-the-job self-calibration will yield reliable models (pre-calibration RMSE_XY = 7.1 mmand on-the-job self-calibration RMSE_XY = 3.2 mm). When oblique photography was Remote Sens. 2015, 7 11934 excluded from the on-the-job self-calibration solution, the accuracy of the model deteriorated(by 3.3 mm horizontally and 4.7 mm vertically). When the accuracy of the ground controlwas then degraded to replicate typical operational practice (σ = 22 mm), the accuracyof the model further deteriorated (e.g., on-the-job self-calibration RMSEXY went from3.2–7.0 mm). Additionally, when the density of the ground control was reduced, the modelaccuracy also further deteriorated (e.g., on-the-job self-calibration RMSE_XY went from7.0–7.3 mm). However, our results do indicate that loss of accuracy due to sparse groundcontrol can be mitigated by including oblique imagery. Full article

► Show Figures

Graphical abstract

1228 KiB

Open AccessArticle

Variability and climate change trend in vegetation phenology of recent decades in the Greater Khingan Mountain area, Northeastern China

by Huan Tang, Zhenwang Li, Zhiliang Zhu, Baorui Chen, Baohui Zhang and Xiaoping Xin

Remote Sens. 2015, 7(9), 11914-11932; https://doi.org/10.3390/rs70911914 - 16 Sep 2015

Cited by 62 | Viewed by 6742

Abstract

Vegetation phenology has been used in studies as an indicator of an ecosystem’s responses to climate change. Satellite remote sensing techniques can capture changes in vegetation greenness, which can be used to estimate vegetation phenology. In this study, a long-term vegetation phenology study [...] Read more.

Vegetation phenology has been used in studies as an indicator of an ecosystem’s responses to climate change. Satellite remote sensing techniques can capture changes in vegetation greenness, which can be used to estimate vegetation phenology. In this study, a long-term vegetation phenology study of the Greater Khingan Mountain area in Northeastern China was performed by using the Global Inventory Modeling and Mapping Studies (GIMMS) normalized difference vegetation index version 3 (NDVI3g) dataset from the years 1982–2012. After reconstructing the NDVI time series, the start date of the growing season (SOS), the end date of the growing season (EOS) and the length of the growing season (LOS) were extracted using a dynamic threshold method. The response of the variation in phenology with climatic factors was also analyzed. The results showed that the phenology in the study area changed significantly in the three decades between 1982 and 2012, including a 12.1-day increase in the entire region’s average LOS, a 3.3-day advance in the SOS and an 8.8-day delay in the EOS. However, differences existed between the steppe, forest and agricultural regions, with the LOSs of the steppe region, forest region and agricultural region increasing by 4.40 days, 10.42 days and 1.71 days, respectively, and a later EOS seemed to more strongly affect the extension of the growing season. Additionally, temperature and precipitation were closely correlated with the phenology variations. This study provides a useful understanding of the recent change in phenology and its variability in this high-latitude study area, and this study also details the responses of several ecosystems to climate change. Full article

► Show Figures

Graphical abstract

Journal Menu

Journal Browser

Remote Sens., Volume 7, Issue 9 (September 2015) – 73 articles , Pages 11016-12587

Further Information

Guidelines

MDPI Initiatives

Follow MDPI