Next Article in Journal
Roles of Climate Change and Increasing CO2 in Driving Changes of Net Primary Productivity in China Simulated Using a Dynamic Global Vegetation Model
Next Article in Special Issue
A Two-Echelon Inventory System with a Minimum Order Quantity Requirement
Previous Article in Journal
The Case for Inclusion of International Planning Studios in Contemporary Urban Planning Pedagogy
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Inventory Model Design by Implementing New Parameters into the Deterministic Model Objective Function to Streamline Effectiveness Indicators of the Inventory Management

Department of Transport and Logistics, Faculty of Technology, Institute of Technology and Business in České Budějovice, 370 01 České Budějovice, Czech Republic
*
Author to whom correspondence should be addressed.
Sustainability 2019, 11(15), 4175; https://doi.org/10.3390/su11154175
Submission received: 3 July 2019 / Revised: 23 July 2019 / Accepted: 29 July 2019 / Published: 2 August 2019
(This article belongs to the Special Issue Inventory Management for Sustainable Industrial Operations)

Abstract

:
The aim of this article is to modify the parameters and thus the objective function of the deterministic model of inventory theory so that other important aspects, which influence inventory management, can be taken into consideration. These aspects include the nature of inventory consumption, the share of inventories in sales, the capacity of means of transport and, above all, the reliability of suppliers. This goal is achieved by performing sophisticated and specific calculations for the individual parameters in the modified model. The modification of the objective function of the deterministic model has created a new multi-criteria model. The outcome of this model sought to optimize the supply process in a way that minimizes the risks associated with a lack of inventories while maintaining the economic effectiveness thereof. The model effectiveness is examined by comparing the application of the deterministic model and the proposed model with modified objective function. The results of applying these individual models have been produced based on calculations of indicators showing inventory management effectiveness—the speed of inventory turnover and the average number of inventories in storage.

1. Introduction

Models that apply methods of operational analysis are widely used for inventory management. As a matter of fact, an independent discipline that tackles the various economic and technical issues associated with material management, namely material/inventory theory, arose from operational analysis. Material theory (or more precisely the mathematical theory of inventory and production) deals with streamlining materials, semi-finished products, and product circulation, and the overall effectiveness of their management. The differences between models of material theory lie in which way and through which indicators the estimated consumption is defined, which probability model tests the consumption and the ordering cycle, and in which way the potential risks are estimated [1,2].
The deterministic model of inventory management is a basic model in the field of material theory. The parameters for the objective function of the model and its internal structure are mainly focused on the economics of inventory management. Nevertheless, this model takes into consideration only basic factors such as the cost associated with the supply process, the consumption intensity of particular inventory items and the delivery [3,4].
The aim of this article is to modify the objective function of the deterministic model of inventory theory and to make specific calculations for individual parameters in such a way that inventories are optimized not only with respect to costs but also in regard to significant factors affecting the supply process [5]. These factors are the capacity of the means of transport, consumption, the share of inventories in the sales of a company and, last but not the least, the reliability of suppliers.

2. Literature Review

As inventory management is currently a topical issue, it has been addressed in many publications focusing on a variety of problems. It arises, in particular, from the need of enterprises for inventory management results to ensure certain market competitiveness. For instance, this matter is addressed by Atnafu and Balda [6] in their publication. They focused on small enterprises in Ethiopia and searched for empirical evidence in regard to inventory management that has a significant impact on the competitiveness of micro and small businesses. Inventory management efficiency is often measured through inventory management efficiency indicators. Specifically, it is the stock (inventory) turnover indicator that has been investigated in multiple publications [7,8,9,10,11]. The research study [7] deals with an empirical analysis of the impact of demand uncertainty in the US retail sector on stock turnover performance. The issue of unequal customer demand in the context of inventory is very topical as well. This topic is addressed by authors in the literature [8], where they search for an answer to the question of whether the high and low inventory turnovers of retailers respond differently to demand shocks?
Other options to influence inventory turnover positively have brought various innovations in the field including the horizontal or vertical integration of supply chain links. These issues have been discussed, for example, in publications [9,10]. In publication [9], the authors generally focus on the role of innovation in terms of the performance of inventory turnover, whereby publication [10] specifically deals with the impact of vertical integration on inventory turnover and operational performance. Inventory management performance indicators are influenced by both customer demand as well as supplier activity. The literature [11] proposes a hybrid algorithm that represents a model of inventory management with suppliers aiming to maximize inventory turnover in the manufacturer’s warehouse. One way to increase inventory turnover is to choose the appropriate inventory management model. Many inventory management models have already been designed and operated. A general overview of stochastic models of inventory management is provided in publication [12], where the authors reviewed literature sources regarding stochastic models. In research study [13], the authors analyzed the performance of inventory management systems not only through the stochastic model but also from the deterministic model perspective. Deterministic models, or inventory-oriented models with deterministic demand, are addressed in publications [14,15,16,17] as well.
Different points of views on inventory model designs are examined in studies [18,19,20,21]. In publications [18,19], inventory models are proposed in such a way that various variabilities within inventory management are taken into account, in particular, whether variability is represented by delivery time [18], or the capacity utilization [19]. The general objective of inventory management is represented by the requirement for a minimum order size, which is addressed in publication [20], and also, an important aspect of any industrial area at present, environmental requirement is addressed in the literature [21]. Other models have been addressed in studies [22,23,24,25,26]. Those publications focused on various aspects of inventory management. The lost-sale model is analyzed in [22], the inventors’ selection model in [23], an inventory model designed to efficiently redistribute production to individual orders (multi-objective model) is investigated in [24], a customer service model dealing with the service focus differentiation and response to time guarantees (a base-stock inventory model) in [25], and, of course, cost models of inventory management (continuous inventory models of diffusion type) are addressed in [26].
Publication [27] discusses the topic regarding the production process with supply issues and their cost performance (production–inventory system). Several publications, such as [28,29,30,31,32,33,34], address performance measurement in various fields in relation to inventory management. The impact of inventory management on overall supply chain performance is described by authors in publications [28,29,30,31]. While literature [30] examines the impact of retailers with knowledge of supplier’s inventory on supply chain performance, research study [31] investigates the effect of control system structure and the performance of an inventory goods flow system with long-variable delay. The interdependence among inventory types and firm performance is elaborated in publication [32]. The authors of literature reference [33] discuss financial performance assessment in terms of inventory management practices, and study [34] is aimed at performance assessment in homogeneous/heterogeneous collaborative enterprise networks with inventory adjustment.
The literature review conducted suggests that there are a number of research studies aimed at designing different inventory management models as well as evaluating inventory management performance. The objective of our manuscript is, based on a performed research study, to demonstrate the positive impact of a purposeful change in the objective function parameters on inventory management performance indicators.

3. Materials and Methods

The reliable delimitation of the optimal order quantity Qopt depends on multiple factors. For the purpose of this research study, the existing deterministic model represents the principle based on which a new inventory model can be proposed, whereby the relationships of factors affecting the whole inventory management are investigated. Analyzing the deterministic model objective function of inventory theory is the subject of the Section 3.1.

3.1. Delimitation of the Optimal Order Quantity by the Deterministic Model

Under the deterministic model, the order size Q and order cycle t have a steady character. In such cases, it is possible for an order to be available when the very last item is out of stock. However, problems arise when a particular stock item is consumed intermittently, or its consumption fluctuates. This implies that the use of the deterministic model for inventory management is therefore confined to steadily-consumed stock items [35,36,37].
As a result, the application of the deterministic model of inventory management requires an XYZ analysis. The objective function of the deterministic model is applied when the focus is on the overall annual costs of the supply process NC, whereby the following parameters are taken into consideration:
  • delivery cost Ndod;
  • storage cost nskl;
  • purchase price CN.
The aim of the deterministic model is to minimize the objective function (1):
( Q ) = N d o d + n s k l + C N m i n
where: NC—overall costs [money]; Ndod—delivery cost [money]; nskl—storage cost [money]; CN—purchase price [money] [35].
The objective function of the deterministic model focuses on minimizing the cost associated with supplies, i.e., it only deals with the economics of inventory management. Delivery cost Ndod in the deterministic model includes all cost items related to obtaining the supplies (orders, phone fees, fax, postage, and transport cost) associated with one order, which are subject to change [36].
The main purpose of the deterministic model of inventory management is to optimize the order size Q and the inventory level H, while taking into consideration the economic criterion of the overall annual costs of the supply process NC [35,38]. The outcome of the application of the deterministic model discloses information about:
(a)
order size Qopt (see Equation (2))
Q o p t = 2 × I × N d o d n s k l   [ m . u . ]
where: I—consumption intensity per day [unit quantity]; Ndod—delivery cost [money]; nskl—storage cost [money] [35].
(b)
order cycle duration t (see Equation (3))
t = Q o p t I × 365   [ day s ]
(c)
inventory level H (see Equation (4)–(6))
If d t ; then
H = d × I 365   [ m . u . ]
where: d—delivery time [days].
If d > t ; then
H = d × I 365 m × Q o p t   [ m . u . ]
m = d t
Based on knowledge of the deterministic model of inventory management and comprehending the fundamental principles of its conception as well as its internal logic, the new inventory management model was designed. Section 3.2 is particularly devoted to proposal of that model objective function.

3.2. Proposing the New Objective Function of the Inventory Management Model

The modified objective function is not confined to only minimizing the cost associated with inventories, but also on the extent to which inventory funds are related to the minimization of the risks associated with a lack of inventories. In order to specify the objective function, the degree of risk associated with the lack of inventories is calculated as the potential losses a company would suffer as a result of having a certain lack of inventories Sned. The parameters for the objective function of the modified model are:
  • annual delivery cost NdodR;
  • inventory cost and their dependence on inventory funds W;
  • losses incurred due to a lack of inventories Sned.
The aim of the modified model is to minimize the objective function (see Equation (7)):
N C ( Q ) = N d o d R + W + S n e d m i n
where: NCoverall costs [money]; NdodR—annual delivery cost [money]; W—dependence on inventory funds [money]; Sned—losses incurred due to lack of inventories [money].
Since the modified objective function includes the potential losses that would be incurred due to the lack of inventories Sned, the modified model is no longer only focused on minimizing costs, but also takes into consideration other strategic criteria, such as the share of inventories in sales F and the reliability of suppliers DS.
The following sections (Section 3.2.1, Section 3.2.2 and Section 3.2.3) specify methods for calculating the individual parameters for the modified objective function.

3.2.1. Delivery Cost Determination Method

The optimization of inventories using the modified model takes into consideration annual delivery cost NdodR. The bigger the offer, the higher the delivery costs are (upon exceeding the capacity of the transport unit kPJ). In contrast, if the amount of annual orders R decreases by increasing the order size QN, the annual delivery cost NdodR decreases—as is suggested in Figure 1. When applying the new parameter NdodR, the modified model takes into consideration the following factors that influence the management process:
  • capacity of transport unit kPJ;
  • consumption R; r;
  • consumption intensity I;
  • knowledge that delivery cost Ndod considerably changes upon exceeding the capacity;
  • specific order size NdodPJ.
The calculation of the annual delivery cost NdodR for the purposes of the application of the model with modified objective function is as follows (see Equation (8)):
N d o d R =   r Q N / I × R × N d o d P J × Q N k P J
where: NdodR—annual delivery cost [money]; r—consumption period [days]; QN—order size [unit quantity]; I—consumption intensity per day [unit quantity]; R—number of consumption periods per year [-]; NdodPJ—cost of delivery of one transport unit [money]; kPJ—capacity of transport unit [unit quantity]; kS—storage capacity [unit quantity].
Figure 1 depicts the relationship between factors affecting the annual delivery cost NdodR. The definition of this relationship is necessary for the relevant specification of inventories of NdodR calculation and the subsequent optimization of inventories by minimizing the proposed objective function.

3.2.2. Storage Cost and Purchase Price Determination Method

The objective function of the modified model, together with the objective function of the deterministic model, includes nskl; however, this parameter is an integral part of the specific calculation of parameter W, which, apart from nskl, is reflected in the extent to which the funds are related to inventories VFP.
Both parts of parameter W (nskl + VFP) depend on the inventory level H maintained in the company, the level of which indicates the consumption intensity of inventories I, the delivery period d and also the reliability of the particular supplier DS. The incorporation of the DS parameter in the objective function considerably reduces the risks associated with the lack of inventories, and thereby ensures standard customer service, while the economic effectiveness of the deterministic model is not omitted. The VFP parameter depends on the purchase price of the specific inventory CN, which refers to another aspect of the objective function of the deterministic model. Parameter W in the modified model takes the following into consideration:
  • consumption intensity I;
  • delivery period d;
  • reliability of the supplier DS;
  • purchase price CN.
The calculation of parameter W for the application of the model with modified objective function is as follows (see Equation (9)):
W H =   ( I × d + Q N × D S ) × ( n s k l + C N )    
where: WH—capital tied up in inventory [money]; I—consumption intensity per day [unit quantity]; d—delivery period [days]; QN—order size [unit quantity]; DS—reliability of supplier [-]; nskl—storage cost [money]; CN—purchase price [money].

3.2.3. Risk of Lack of Inventories Determination Method

The objective function of the modified model of inventory management not only focuses on previous cost values, but also on minimizing the risks associated with the lack of inventories, as defined by the parameter Sned. The value of this parameter depends on the following factors:
  • reliability of supplier DS;
  • share of inventories in sales F;
  • purchase price CN;
  • consumption intensity I;
  • delivery period d.
The calculation for the losses associated with the lack of inventories Sned for the application of the model with modified objective function is as follows (see Equation (10)).
S n e d N = Q o p t × ( F 100 × C p ) ( I × d + Q N × D S ) × ( F 100 × C p ) .  
where: SnedN—losses due to lack of inventories [money]; Qopt—optimal order size [unit quantity]; F—percentage share in sales [%]; CP—purchase price of final product [money]; I—consumption intensity per day [money]; d—delivery period [days]; QN—order size [unit quantity]; DS—reliability of supplier [-].
Based on the proposed objective function, specific indicators, as follow, can be calculated:
(a)
order size Qopt;
For inventories which are consumed continuously or with less fluctuation, Equation (11) is applied:
Q o p t = 2 × I × N d o d R W   [ m . u . ]
For inventories which are consumed randomly, Equation (12) is applied:
Q o p t = I × d     [ m . u . ]
(b)
order cycle duration t (see Equation (13));
t = Q o p t I   [ day s ]
(c)
inventory level H (see Equation (14));
H = 2 × S n e d W   [ m . u . ]

3.2.4. Designation of Research Prerequisites

The subject of this research study will also be to either confirm or disprove the designated research prerequisites as follows:
  • P1: Incorporation of parameter NdodR in the objective function of the modified model does not increase the average inventory level Q ¯ .
  • P2: Incorporation of parameter NdodR in the objective function of the modified model does not decrease the speed of inventory turnover v.
  • P3: Incorporation of parameter W in the objective function of the modified model does not increase the maintained inventory level H in the company.
  • P4: Incorporation of parameter W in the objective function of the modified model does not decrease the speed of inventory turnover v.
  • P5: Incorporation of parameter Sned in the objective function of the modified model does not increase the maintained inventory level H in the company.
Given research prerequisites have been formulated based on the objectives stipulated during designing the new inventory management model. Confirming or disproving the specified prerequisites will be undertaken through a particular case study, in which the application results of the deterministic and proposed model will be compared (see Section 4).

4. Comparison of Applying the Deterministic Model and the Designed Model

A research study dealing with the optimization of the supply process was used to compare the application of the deterministic model and that of the model with modified objective function. Three representatives in relation to inventories were chosen in a specific company according to their stochastic character in the consumption of the particular inventory item. The input data is presented in Table 1.
Following the data on specific inventory items of the given company, the calculations needed to optimize the supply process using the deterministic model (Section 4.1) and the proposed model (Section 4.2) will be performed in following sections.

4.1. Determination of the Optimal Order Size

The extent and parameters for the calculation of the optimal order size Qopt differ for the model with modified objective function and the deterministic model. In contrast to the deterministic model, the modified model of inventory management takes into consideration the daily consumption of inventories I [m.u./day] in contrast to the annual consumption of inventories I [m.u./year] and the annual delivery cost NdodR in contrast to one-off delivery cost Ndod.
The reason for calculating annual delivery cost is that this value also takes into consideration the number of orders carried out per year R, which depends on order size Q; on the one hand, the smaller the order, the lower the one-off delivery cost is Ndod, while, on the other hand, it means a larger number of orders carried out per year R, which also means an increase in delivery cost per year NdodR.
Furthermore, the calculation of annual delivery cost NdodR must take into consideration changes in delivery cost as a result of exceeding the capacity of the means of transport kPJ and the consumption of the particular inventory, which in turn significantly influences the number of orders carried out per year R, and which is closely associated with annual delivery cost NdodR.
Another change regarding the parameters consists in the calculation of the optimal order size Qopt according to the modified model and its dependence on the newly created parameter W, which substitutes individual storage cost nskl in the deterministic model. Parameter W, apart from storage cost nskl, also takes into consideration their dependence on inventory funds VFP, which enhances the economic effectiveness of inventory management. The inventory level H means the key variable for the calculation of parameter W depends on consumption intensity I, delivery period d, purchase price CN and the reliability of the supplier DS. This not only increases economic effectiveness, but also minimizes the risks associated with the lack of inventories.
Figure 2 illustrates how the optimal order size is determined through distribution curves that indicate changes in the NdodR and W parameters in relation to order size QN for the model with modified objective function.
The blue curve represents the change in NdodR depending on QN at the limited vehicle capacity. The red curve depicts the dependence of the capital tied up in inventory W on QN at a certain intensity and the nature of the given inventory consumption, while also taking into account the delivery period and reliability of the supplier in terms of the delivery process.
Table 2 compares calculations for the optimal order size Qopt according to the deterministic model of inventory management and the model with modified objective function. It also includes specific calculations for the optimal order size Qopt for the individual representatives of the inventories (α, β, γ) identified and defined in Table 1.

4.2. Determination of the Order Cycle Duration

The order cycle duration t depends on the optimal order size Qopt and the consumption intensity I. The deterministic model and the model with modified objective function differ in the way they determine the order cycle t, whereby, under the former, the calculation is based on annual consumption I [m.u./year] and, under the latter, on daily consumption I [m.u./day].
The order cycle duration t for the modified model is calculated only for inventories consumed continuously. Orders for other inventory items are classified according to ‘inventory level’ H (according to Equation (14)). The calculations for the order cycle duration on the basis of both models are presented in Table 3.
The lower the optimal order size Qopt derived from the modified model of inventory management, the shorter the order cycle t; this fact has a favorable impact on the indicator for the speed of inventory turnover v. The higher the speed of inventory turnover v, the more economically effective the inventory management.

4.3. Determination of the Inventory Level

The methods for calculating the inventory level H significantly differ between the two models. Under the deterministic model, the determination of inventory level H is based on consumption intensity I, the delivery period d and the order cycle duration t.
The modified model of inventory management determines the inventory level H in such a way that minimizes the likelihood of the risk of a lack of inventories to almost zero. The method for the calculation of the losses that would be suffered as a result of the lack of inventories Sned (10), allows other factors relevant to the supply process to be taken into consideration. These factors include the reliability of the supplier of the particular inventory DS, the extent to which the specific inventory participates in the sales of the final product F and the purchase price of the specific inventory CN.
Figure 3 illustrates how the optimal inventory level is determined through distribution curves that indicate changes in the W and Sned parameters in relation to inventory level HN for the model with modified objective function.
The blue curve represents the dependence of the capital tied up in inventory W on HN at a certain intensity and the nature of given inventory consumption, while also taking into account the delivery period and reliability of the supplier in terms of the delivery process. The red curve shows the likelihood of the risk of a lack of inventories and the resulting cost Sned depending on the inventory level in the warehouse HN.
The calculations for the emergency supply inventory α and the determination of the signal inventory level H for inventory β and γ according to the deterministic and modified model of inventory management are presented in Table 4.
The modified model of inventory management determines:
  • the size of the emergency supply for inventories consumed continuously through the year;
  • the size of the signal inventory for inventories with a consumption that is affected by seasonal fluctuations or surges.

5. Results and Discussion

In general, most of the published studies dealing with inventory management issues are aimed at applying existing inventory management models (see literature review chapter) as well as publications [38,39,40,41,42,43,44]. Unlike those literature sources, this manuscript is focused on an in-depth analysis of the existing model internal structure, i.e., the deterministic model of inventory management, and investigates options to improve its objective function through the appropriate design of its parameters. The research purpose of this article is, thus, to propose the inventory management model that, when applied in practice, will allow a company to optimize the inventory level as well as the entire supply process, while taking into account the whole scale of criteria that have not been incorporated into existing models yet. These criteria do not only consist of a cost criterion, as is the case with existing models [12,45], but also consider other significant factors affecting supply process continuity.
In contrast to the parameters for the deterministic model of inventory management, the model with modified objective function not only optimizes inventories in relation to delivery cost Ndod, storage nskl and the purchase price of inventory CN, but also takes into consideration the potential losses that would be suffered if inventories were not available on time Sned. Moreover, the modified model works with an annual delivery cost NdodR instead of one-off delivery cost Ndod, which results in the long-term sustainable economic effectiveness of the supply process.
The incorporation of parameter NdodR in the objective function of the modified model may cause a considerable increase in the average inventory level Q ¯ , which would consequently reduce the speed of inventory turnover v. The reduction in the speed of inventory turnover v along with the increase in the inventory level H in the company represents emergency supplies, i.e., signal supply may be caused by incorporating parameter W in the objective function of the modified model. Apart from parameter W, the incorporation of parameter Sned may also play an important role in increasing the maintained inventory level H in the company.
The average inventory level Q ¯ , together with the speed of inventory turnover v, is a leading indicator of the effectiveness of inventory management [39]. The average inventory level Q ¯ amounts to ½ the optimal order size Qopt (see Equation (15)).
Q ¯ =   Q o p t 2   [ m . u . ]
Table 5 compares the figures for the average inventory levels for the individual items Q ¯ regarding the optimal order size Qopt according to both models of inventory management.
Under the modified model of inventory management, the average inventory level Q ¯ for β and γ is significantly lower because, unlike the deterministic model, it takes fluctuations and surges in inventory consumption into consideration.
This important fact is further confirmed by the indicator for the speed of inventory turnover v, which shows how many times per year, i.e., reporting periods, the original inventories are changed for new ones (see Equation (16)). The key goal is to achieve the highest possible speed of inventory turnover v [40].
v =   1 t × r   [ times / year ]
In Table 6, the figures for the optimal speed of inventory turnover v according to both models of inventory management are compared.
Table 7 compares the results of the application of the modified model (light gray areas) to that of the deterministic model (dark gray areas) of inventory management.
Based on the obtained results summarized in the table above (see Table 7), predesignated research prerequisites (see Section 3.2.4) may be confirmed or disproved. For better clarity, the research prerequisites, as well as their confirmation or disproving, are listed in the Table 8 as follows.
Following the results of the case study conducted within this manuscript, it can be stated that the optimal order size is lower for all the inventory item types that have been the subject of the research, which results in a shorter order cycle as well. This is due to the fact that the proposed model, in addition to storage cost, also takes into account the level of capital tied up in inventory items, which are dependent on the inventory level in the warehouse. For the same reason, the optimal inventory level kept in the warehouse after the proposed model application is lower compared to the results of the deterministic model application and, thereby, the average inventory level in the warehouse is lower as well. These facts have a positive effect on the storage cost value as well as the overall level of capital tied up in inventory. Due to the lower optimal order size, the order cycle is also shorter, thus increasing the inventory turnover rate, which is a significant indicator of the supply process being managed efficiently.

6. Conclusions

The objective of this article was to modify the parameters and thus the objective function of the inventory theory deterministic model in order that other important aspects which influence inventory management could be taken into consideration. In doing so, account was not only taken of the cost associated with inventories, consumption intensity and delivery period, but also the capacity of the means of transport, consumption, the share of inventories in sales and, last but not the least, the reliability of suppliers.
The effectiveness of optimizing inventories by implementing the modified model was verified through its application and the subsequent comparison of the results with the existing deterministic model. Order size, order cycle duration and sustained inventory levels were compared, as were the speed of inventory turnover and the average inventory level as key indicators of the effectiveness of inventory management.
The results of the research study have revealed that the optimal order size is smaller for all the inventories that were included in the research study, which indicates a shorter order cycle. It results from the fact that inventories optimized through the model with modified objective function not only take into consideration storage cost, but also their dependence on inventory funds, which is dependent on the inventory level in storage.
For this reason, the optimal sustained inventory level in storage was lower after the application of the modified model in comparison to the results obtained through the deterministic model; the average inventory level in storage was therefore also lower. These observations have a favorable impact on the amount of storage cost and overall dependence on inventory funds. Furthermore, the smaller optimal order size indicates a shorter order cycle, which in turn means a higher speed of inventory turnover, which is a key indicator of an effectively controlled supply process.
As for future research recommendations, due to the wide range of criteria within the model proposed leading to large-scale calculations, it would be, therefore, reasonable to develop a software application based on the designed inventory model in order to automate the overall or partial inventory optimization processes. Another alternative may be to implement the proposed model in MS Excel using the specific mathematical, statistical and graphical functions. After entering the input parameters, the developed software application should allow calculating and creating optimization graphs to determine the optimal order size and the optimal inventory level, as well as the optimal order cycle, in an enterprise. Developing the specific SW application for the designed model would help towards automating optimization processes that would greatly contribute to both time and cost savings.

Author Contributions

O.S. and M.S. conceived and designed the manuscript; they elaborated its methodology, processed the literature review, verified the results and performed the experiments; V.Ľ. performed individual calculations, realized the final manuscript corrections and supervised the formal revision of the manuscript.

Funding

This research received no external funding.

Acknowledgments

This manuscript was supported within solving the research project entitled “Autonomous mobility in the context of regional development LTC19009” of the INTER-EXCELLENCE program, the VES 19 INTER-COST subprogram.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Kampf, R.; Lorincová, S.; Hitka, M.; Caha, Z. The Application of ABC Analysis to Inventories in the Automatic Industry Utilizing the Cost Saving Effect. Nase More 2016, 63, 120–125. [Google Scholar] [CrossRef]
  2. Göçmen, E.; Erol, R. Transportation problems for intermodal networks: Mathematical models, exact and heuristic algorithms, and machine learning. Expert Syst. Appl. 2019, 135, 374–387. [Google Scholar] [CrossRef]
  3. Engebrethsen, E.; Dauzère-Pérès, S. Transportation mode selection in inventory models: A literature review. Eur. J. Oper. Res. 2019, 279, 1–25. [Google Scholar] [CrossRef]
  4. Chitsaz, M.; Cordeau, J.F.; Jans, R. A unified decomposition matheuristic for assembly, production, and inventory routing. INFORMS J. Comput. 2019, 31, 134–152. [Google Scholar] [CrossRef]
  5. Kubasakova, I.; Jagelcak, J. Logistics system Just-in-Time and its implementation within the company. Commun. Sci. Lett. Univ. Zilina 2016, 18, 109–112. [Google Scholar]
  6. Atnafu, D.; Balda, A. The impact of inventory management practice on firms’ competitiveness and organizational performance: Empirical evidence from micro and small enterprises in Ethiopia. Cogent Bus. Manag. 2018, 5, 1503219. [Google Scholar] [CrossRef]
  7. Hancerliogullari, G.; Sen, A.; Aktunc, E.A. Demand uncertainty and inventory turnover performance an empirical analysis of the US retail industry. Int. J. Phys. Distrib. Logist. Manag. 2016, 46, 681–708. [Google Scholar] [CrossRef]
  8. Kesavan, S.; Kushwaha, T.; Gaur, V. Do High and Low Inventory Turnover Retailers Respond Differently to Demand Shocks. M Som-Manuf. Serv. Oper. Manag. 2016, 18, 198–215. [Google Scholar] [CrossRef]
  9. Lee, H.H.; Zhou, J.; Hsu, P.H. The role of innovation in inventory turnover performance. Decis. Support Syst. 2015, 76, 35–44. [Google Scholar] [CrossRef] [Green Version]
  10. Andreou, P.C.; Louca, C.; Panayides, P.M. The impact of vertical integration on inventory turnover and operating performance. Int. J. Logist. Res. Appl. 2016, 19, 218–238. [Google Scholar] [CrossRef]
  11. Beklari, A.; Nikabadi, M.S.; Farsijani, H.; Mohtashami, A. A Hybrid Algorithm for Solving Vendors Managed Inventory (VMI) Model with the Goal of Maximizing Inventory Turnover in Producer Warehouse. Ind. Eng. Manag. Syst. 2018, 17, 570–587. [Google Scholar] [CrossRef]
  12. De Kok, T.; Grob, C.; Laumanns, M.; Minner, S.; Rambau, J.; Schade, K. A typology and literature review on stochastic multi-echelon inventory models. Eur. J. Oper. Res. 2018, 269, 955–983. [Google Scholar] [CrossRef] [Green Version]
  13. Fattah, J.; Ezzine, L.; El Moussami, H.; Lachhab, A. Analysis of the performance of inventory management systems using the SCOR model and Batch Deterministic and Stochastic Petri Nets. Int. J. Eng. Bus. Manag. 2016, 8, 1847979016678370. [Google Scholar] [CrossRef]
  14. Mawandiya, B.K.; Jha, J.K.; Thakkar, J. Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment. Int. J. Sustain. Eng. 2016, 9, 315–328. [Google Scholar] [CrossRef]
  15. Mishra, U. A waiting time deterministic inventory model for perishable items in stock and time dependent demand. Int. J. Syst. Assur. Eng. Manag. 2016, 7, 294–304. [Google Scholar] [CrossRef]
  16. Vandana, R.; Sharma, B.K. A Deterministic Inventory Model for Non-Instantaneous Deteriorating Items with Ramp-Type Deant Rate and shortages under Permissible Delay in Payments. Matematiche 2016, 71, 129–159. [Google Scholar] [CrossRef]
  17. Serrano, A.; Oliva, R.; Kraiselburd, S. On the cost of capital in inventory models with deterministic demand. Int. J. Prod. Econ. 2017, 183, 14–20. [Google Scholar] [CrossRef]
  18. Jauhari, W.A.; Sianipar, M.; Rosyidi, C.N.; Dwicahyani, A.R. A vendor-buyer inventory model with imperfect production considering investment to reduce lead time variability. Cogent Eng. 2018, 5, 1531455. [Google Scholar] [CrossRef]
  19. Lin, F.; Jia, T.; Wu, F.; Yang, Z. Impacts of two-stage deterioration on an integrated inventory model under trade credit and variable capacity utilization. Eur. J. Oper. Res. 2019, 272, 219–234. [Google Scholar] [CrossRef]
  20. Park, J.H.; Kim, J.S.; Shin, K.Y. Inventory control model for a supply chain system with multiple types of items and minimum order size requirements. Int. Trans. Oper. Res. 2018, 25, 1927–1946. [Google Scholar] [CrossRef]
  21. Zadjafar, M.A.; Gholamian, M.R. A sustainable inventory model by considering environmental ergonomics and environmental pollution, case study: Pulp and paper mills. J. Clean. Prod. 2018, 199, 444–458. [Google Scholar] [CrossRef]
  22. Baek, J.W.; Bae, Y.H.; Lee, H.W.; Ahn, S. Continuous-type (s, Q)-inventory model with an attached M/M/1 queue and lost sales. Perform. Eval. 2018, 125, 68–79. [Google Scholar] [CrossRef]
  23. Duan, L.S.; Ventura, J.A. A Dynamic Supplier Selection and Inventory Management Model for a Serial Supply Chain with a Novel Supplier Price Break Scheme and Flexible Time Periods. Eur. J. Oper. Res. 2019, 272, 979–998. [Google Scholar] [CrossRef]
  24. Esteso, A.; Alemany, M.M.E.; Ortiz, A.; Peidro, D. A multi-objective model for inventory and planned production reassignment to committed orders with homogeneity requirements. Comput. Indrustrial Eng. 2018, 124, 180–194. [Google Scholar] [CrossRef]
  25. Gabor, A.F.; Van Vianen, L.A.; Yang, G.Y.; Axsater, S. A base-stock inventory model with service differentiation and response time guarantees. Eur. J. Oper. Res. 2018, 269, 900–908. [Google Scholar] [CrossRef]
  26. Helmes, K.L.; Stockbridge, R.H.; Zhu, C. Continuous Inventory Models of Diffusion Type: Long-Term Average Cost Criterion. Ann. Appl. Probab. 2017, 27, 1831–1885. [Google Scholar] [CrossRef]
  27. Synakova, L. Production Smoothing and Cost Performance in a Production-inventory System. J. Compet. 2017, 9, 117–133. [Google Scholar] [CrossRef] [Green Version]
  28. Srivathsan, S.; Kamath, M. Performance modeling of a two-echelon supply chain under different levels of upstream inventory information sharing. Comput. Oper. Res. 2017, 77, 210–225. [Google Scholar] [CrossRef]
  29. Pamulety, T.C.; George, J.; Pillai, V.M. An inventory position-based policy for better supply chain performance. J. Ind. Prod. Eng. 2017, 34, 180–198. [Google Scholar] [CrossRef]
  30. Jain, A.; Mamani, H.; Moinzadeh, K. Impact of Retailers with Knowledge of Supplier’s Inventory on Supply Chain Performance. Prod. Oper. Manag. 2017, 26, 542–556. [Google Scholar] [CrossRef]
  31. Cholodowicz, E.; Oelowski, P. Impact of Control System Structure and Performance of Inventory Goods Flow System with Long-Variable Delay. Elektron. ir Elektrotechnika 2018, 24, 11–16. [Google Scholar] [CrossRef]
  32. Mnikas, A.S. Interdependence Among Inventory Types and Firm Performance. Oper. Supply Chain Manag. An Int. J. 2017, 10, 63–80. [Google Scholar] [CrossRef]
  33. Karadag, H. Cash, receivables and inventory management practices in small enterprises: Their associations with financial performance and competitiveness. Small Enterp. Res. 2018, 25, 69–89. [Google Scholar] [CrossRef]
  34. Schleich, B.R.; Seok, H.; Yoon, S.W. Performance assessment in homogeneous/heterogeneous collaborative enterprise networks with inventory adjustment. Eur. J. Oper. Res. 2017, 261, 958–970. [Google Scholar] [CrossRef]
  35. Vrat, P. Deteministic Inventory Models. Mater. Manag. An Integr. Syst. Approach 2014, 81–103. [Google Scholar] [CrossRef]
  36. Saxena, P.; Vats, B. Excel Solver for Deterministic Inventory Model: Insolver. Inf. Sytems Des. Intell. Appl. 2016, 433, 191–198. [Google Scholar] [CrossRef]
  37. Patnaik, V.V.S.P.; Patnaik, D.P.; Rao, K.S. A Numerical Study on Deterministic Inventory Model for Deteriorating Items with Selling Price Dependent Demand and Variable Cycle Length. Jordan J. Mech. Ind. Eng. 2015, 9, 223–239. [Google Scholar]
  38. Rahim, M.K.I.A.; Nadarajan, S.A.S.R.; Razalli, M.R. The Integrated Deterministic Model for a Vendor Managed Inventory in a TW-Ostage Supply Chain. J. Teknol. 2015, 77, 85–91. [Google Scholar]
  39. Oluwaseyi, J.A.; Onifade, M.K.; Odeyinka, O.F. Evaluation of the Role of Inventory Management in Logistics Chain of an Organisation. Logi Sci. J. Transp. Logist. 2017, 8, 1–11. [Google Scholar] [CrossRef] [Green Version]
  40. Hitka, M.; Kotlínová, M.; Štípalová, L. Optimization of the stock in the company continental Automotive Systems Slovakia, LTD. Logi Sci. J. Transp. Logist. 2010, 1, 53–60. [Google Scholar]
  41. Kot, S.; Grondys, K.; Szopa, R. Theory of inventory management based on demand forecasting. Pol. J. Manag. Stud. 2011, 3, 148–156. [Google Scholar]
  42. Wee, H.M.; Jong, J.F. Erratum: An integrated multi–lot–size production inventory model for deteriorating item. Comput. Oper. Res. 2003, 30, 872–873. [Google Scholar]
  43. Poo, M.C.P.; Yip, T.L. An optimization model for container inventory management. Ann. Oper. Res. 2019, 273, 433–453. [Google Scholar] [CrossRef]
  44. Tarasova, E.V.; Moskvicheva, N.V.; Nikulina, E.N. Simulation–Based Improvement in the Models for Tool–Inventory Management at Manufacturing Plants. Russ. Eng. Res. 2019, 39, 160–166. [Google Scholar] [CrossRef]
  45. Mikusova, N.; Mitkova, V. Dynamic production inventory model. In Proceedings of the 24th International Conference on Mathematical Methods in Economics, Pilsen, Czech Republic, 13–15 September 2006. [Google Scholar]
Figure 1. Dependence of delivery cost on order size. Source: Authors.
Figure 1. Dependence of delivery cost on order size. Source: Authors.
Sustainability 11 04175 g001
Figure 2. Determination of the optimal order size.
Figure 2. Determination of the optimal order size.
Sustainability 11 04175 g002
Figure 3. Determination of the optimal order size.
Figure 3. Determination of the optimal order size.
Sustainability 11 04175 g003
Table 1. Input data.
Table 1. Input data.
ParameterAbb.Unit of MeasureInventory
αβγ
Delivery cost of one orderNdod[€]0.50.800.5
Unit storage costnskl[€]0.150.120.15
Capacity of transport unitkPJ[m.u.]20 pcs11 pcs200 kg
Delivery periodd[days]3 pcs2 pcs1 kg
Consumption intensityI[m.u./year]1204.5 pcs2920.0 pcs182.5 kg
[m.u./day]3.3 pcs8.0 pcs0.5 kg
Purchase priceCN[€]100202
Consumption periodr[days]3656020
Number of consumption periodsR[-]120
Reliability of supplierDS[-]0.950.850.9
Purchase priceCP[€]220180150
Share of inventories in salesF[%]95605
Source: Internal data of the selected company.
Table 2. Calculations for optimal order size according to both models.
Table 2. Calculations for optimal order size according to both models.
Deterministic Model *Proposed Model **
According to Equation (2)According to Equation (11)According to Equation (12)
α *β *γ *α **β **γ **
90 pcs197 pcs35 kg14 pcs6 pcs0.5 kg
Explanatory notes: *—calculation according to the deterministic model; **—calculation according to the proposed model.
Table 3. Calculations for order cycle according to both models.
Table 3. Calculations for order cycle according to both models.
Deterministic Model *Proposed Model **
According to Equation (3)According to Equation (13)
α *β *γ *α **β **γ **
27 days25 days70 days4 days0.75 day1 day
Explanatory notes: *—calculation according to the deterministic model; **—calculation according to the proposed model.
Table 4. Calculations for inventory level according to both models.
Table 4. Calculations for inventory level according to both models.
Deterministic Model *Proposed Model **
According to Equations (4)–(6)According to Equation (14)
α *β *γ *α **β **γ **
89 pcs8 pcs0.5 kg4 pcs0 pcs2 kg
Explanatory notes: *—calculation according to the deterministic model; **—calculation according to the proposed model.
Table 5. Comparison of average inventory levels according to both models.
Table 5. Comparison of average inventory levels according to both models.
Deterministic Model *Proposed Model **
According to Equation (15)
α *β *γ *α **β **γ **
45 pcs98.5 pcs17.5 kg7 pcs3 pcs0.25 kg
Explanatory notes: *—calculation according to the deterministic model; **—calculation according to the proposed model.
Table 6. Calculations for the optimal speed of inventory turnover.
Table 6. Calculations for the optimal speed of inventory turnover.
Deterministic Model *Proposed Model **
According to Equation (16)
α *β *γ *α **β **γ **
13.52 x/year2.4 x/year0.3 x/year91.25 x/year80 x/year20 x/year
Explanatory notes: *—calculation according to the deterministic model; **—calculation according to the proposed model.
Table 7. Comparison of the results of the application of both inventory management models.
Table 7. Comparison of the results of the application of both inventory management models.
QopttH Q ¯ v
α90 pcs *14 pcs **27 days *4 days **89 pcs *4 pcs **45 pcs *7 pcs **13.52 x/year *91.25 x/year **
β197 pcs *6 p pcs **25 days *0.75 day **8 pcs *0 pcs **98.5 pcs *3 pcs **2.4 x/year *80 x/year **
γ35 kg *0.5 kg **70 days *1 day **0.5 kg *2 kg **17.5 kg *0.25 kg **0.3 x/year *20 x/year **
Explanatory notes: *—calculation according to the deterministic model; **—calculation according to the proposed model.
Table 8. Confirmation/disproving of the determined research prerequisites.
Table 8. Confirmation/disproving of the determined research prerequisites.
Research PrerequisitesStatus
P1Incorporation of parameter NdodR in the objective function of the modified model does not increase the average inventory level Q ¯ .confirmed
P2Incorporation of parameter NdodR in the objective function of the modified model does not decrease the speed of inventory turnover v.confirmed
P3Incorporation of parameter W in the objective function of the modified model does not increase the maintained inventory level H in the company.confirmed
P4Incorporation of parameter W in the objective function of the modified model does not decrease the speed of inventory turnover v.confirmed
P5Incorporation of parameter Sned in the objective function of the modified model does not increase the maintained inventory level H in the company.confirmed

Share and Cite

MDPI and ACS Style

Stopková, M.; Stopka, O.; Ľupták, V. Inventory Model Design by Implementing New Parameters into the Deterministic Model Objective Function to Streamline Effectiveness Indicators of the Inventory Management. Sustainability 2019, 11, 4175. https://doi.org/10.3390/su11154175

AMA Style

Stopková M, Stopka O, Ľupták V. Inventory Model Design by Implementing New Parameters into the Deterministic Model Objective Function to Streamline Effectiveness Indicators of the Inventory Management. Sustainability. 2019; 11(15):4175. https://doi.org/10.3390/su11154175

Chicago/Turabian Style

Stopková, Mária, Ondrej Stopka, and Vladimír Ľupták. 2019. "Inventory Model Design by Implementing New Parameters into the Deterministic Model Objective Function to Streamline Effectiveness Indicators of the Inventory Management" Sustainability 11, no. 15: 4175. https://doi.org/10.3390/su11154175

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop