Next Issue
Volume 2, September
Previous Issue
Volume 2, March
 
 

Pharmaceutics, Volume 2, Issue 2 (June 2010) – 13 articles , Pages 78-274

  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
252 KiB  
Article
Induction of Drug Transporters Alters Disposition of Risperidone - A Study in Mice
by David Holthoewer, Christoph Hiemke and Ulrich Schmitt
Pharmaceutics 2010, 2(2), 258-274; https://doi.org/10.3390/pharmaceutics2020258 - 02 Jun 2010
Cited by 9 | Viewed by 7666
Abstract
Pharmacokinetic interactions, e.g. modulation of drug transporters like P-glycoprotein at the blood-brain barrier, can be a reason for treatment non-response. This study focuses on the influence of induction of drug transporters on the disposition of the antipsychotic drugs risperidone and 9-hydroxyrisperidone. Brain and [...] Read more.
Pharmacokinetic interactions, e.g. modulation of drug transporters like P-glycoprotein at the blood-brain barrier, can be a reason for treatment non-response. This study focuses on the influence of induction of drug transporters on the disposition of the antipsychotic drugs risperidone and 9-hydroxyrisperidone. Brain and serum concentrations of risperidone and its active metabolite 9-hydroxyrisperidone, which are known P-glycoprotein substrates, were measured after drug transporter induction with rifampicin, dexamethasone or 5-pregnene-3beta-ol-20-on-16alpha-carbonitrile using high performance liquid chromatography. Disposition of risperidone and 9-hydroxyrisperidone was dramatically decreased in mouse brain and serum after drug transporter induction. The metabolism of risperidone was also affected. Full article
Show Figures

Figure 1

801 KiB  
Article
Useful Extend-release Chitosan Tablets with High Antioxidant Activity
by Taira Yasufuku, Makoto Anraku, Yuko Kondo, Toshiyuki Hata, Junzo Hirose, Nobuyuki Kobayashi and Hisao Tomida
Pharmaceutics 2010, 2(2), 245-257; https://doi.org/10.3390/pharmaceutics2020245 - 27 May 2010
Cited by 13 | Viewed by 8490
Abstract
The antioxidant properties of different low molecular weight (LMW) chitosans (CS1; 22 kDa, CS2; 38 kDa, CS3; 52 kDa, CS4; 81 kDa) were examined for possible use in extended-release tablets. The criteria used were the ability of the chitosans to reduce Cu2+ [...] Read more.
The antioxidant properties of different low molecular weight (LMW) chitosans (CS1; 22 kDa, CS2; 38 kDa, CS3; 52 kDa, CS4; 81 kDa) were examined for possible use in extended-release tablets. The criteria used were the ability of the chitosans to reduce Cu2+, and hydroxyl and superoxide radicals and N-centered radicals derived from 1,1'-diphenyl-2-picrylhydrazyl, via the use of ESR spectrometry. CS2 showed the highest scavenging activity. CS1 and CS3, however, were much less effective and CS4 was not a viable antioxidant. The results suggest that CS2 could be useful in combating the development of oxidative stress. A series of chitosan tablets were prepared using a spray drying method and evaluated as an extended-release matrix tablet using theophylline (TPH) as a model drug. The release of TPH from the different MW chitosan tablets increased with increasing MW of the chitosan used. CS2, CS3 and CS4 showed a reasonable release activity, but CS1 showed the shortest release activity. Moreover, the CS2-TPH tablet showed the highest scavenging activity of the three chitosan tablets (CS2-CS4) using 2,2’-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) radicals. These results suggest that a CS2-TPH tablet could be potentially useful in an extended-release matrix tablet with a high antioxidant activity. Full article
Show Figures

Graphical abstract

347 KiB  
Article
The Role of Configurational Entropy in Amorphous Systems
by Kirsten A. Graeser, James E. Patterson, J. Axel Zeitler and Thomas Rades
Pharmaceutics 2010, 2(2), 224-244; https://doi.org/10.3390/pharmaceutics2020224 - 25 May 2010
Cited by 68 | Viewed by 12946
Abstract
Configurational entropy is an important parameter in amorphous systems. It is involved in the thermodynamic considerations, plays an important role in the molecular mobility calculations through its appearance in the Adam-Gibbs equation and provides information on the solubility increase of an amorphous form [...] Read more.
Configurational entropy is an important parameter in amorphous systems. It is involved in the thermodynamic considerations, plays an important role in the molecular mobility calculations through its appearance in the Adam-Gibbs equation and provides information on the solubility increase of an amorphous form compared to its crystalline counterpart. This paper presents a calorimetric method which enables the scientist to quickly determine the values for the configurational entropy at any temperature and obtain the maximum of information from these measurements. Full article
Show Figures

286 KiB  
Article
A Comparative Study of Transmembrane Diffusion and Permeation of Ibuprofen across Synthetic Membranes Using Franz Diffusion Cells
by Shiow-Fern Ng, Jennifer Rouse, Dominic Sanderson and Gillian Eccleston
Pharmaceutics 2010, 2(2), 209-223; https://doi.org/10.3390/pharmaceutics2020209 - 18 May 2010
Cited by 129 | Viewed by 17944
Abstract
Synthetic membranes used in Franz diffusion cells for topical formulation quality assessment should provide least resistance to drug diffusion. In this study, the diffusion rates of ibuprofen across thirteen membranes were determined using Franz diffusion cells. Correlation of the membrane thickness, pore size [...] Read more.
Synthetic membranes used in Franz diffusion cells for topical formulation quality assessment should provide least resistance to drug diffusion. In this study, the diffusion rates of ibuprofen across thirteen membranes were determined using Franz diffusion cells. Correlation of the membrane thickness, pore size and MWCO with drug fluxes was also made. The drug diffusion results showed that the porous membranes were categorized into high-flux (8–18 mg/cm2/h) and low-flux (0.1–3 mg/cm2/h) membranes. The drug fluxes did not show strong correlations (r2 < 0.99) with membrane parameters. Synthetic membranes can give variable drug fluxes, thus investigators should be careful in choosing membrane for formulation quality assessment. Full article
Show Figures

Figure 1

278 KiB  
Article
Asymmetric Membrane Capsules for Extended Delivery of the Weakly Basic Drug Carvedilol
by Kumar Guarve and Ghanshyam Das Gupta
Pharmaceutics 2010, 2(2), 199-208; https://doi.org/10.3390/pharmaceutics2020199 - 18 May 2010
Cited by 7 | Viewed by 7446
Abstract
The objective of this study was to demonstrate that asymmetric membrane capsules can be used to deliver a poorly water soluble drug with a pH dependent solubility, such as carvedilol, for extended periods of time by modulating solubility with acid. In this study, [...] Read more.
The objective of this study was to demonstrate that asymmetric membrane capsules can be used to deliver a poorly water soluble drug with a pH dependent solubility, such as carvedilol, for extended periods of time by modulating solubility with acid. In this study, the effect of the concentration of pH regulating agent and osmotic agents on the release rate of the active material was investigated. For this purpose, asymmetric membrane capsules of carvedilol were prepared using cellulose acetate as a semi-permeable membrane, containing glycerol as plasticizer, and fructose and fumaric acid were used as osmotic agent and pH regulating agent, respectively. In osmotic systems, the release rate of an excipient relative to the release rate of the drug is an important factor that determines the duration of drug release. Owing to high acidic strength and low aqueous solubility, fumaric acid resulted in simultaneous release and maintained a constant micro-environmental condition for the dissolution of the weakly basic drug. Finally, it was observed that the release rate of carvedilol was influenced by the concentration of fumaric acid and fructose. The optimal formulation was found to be able to deliver carvedilol at the rate of approximate zero-order up to 20 h, independent of release media and agitation rate. Full article
Show Figures

Figure 1

248 KiB  
Article
Optimization of Salbutamol Sulfate Dissolution from Sustained Release Matrix Formulations Using an Artificial Neural Network
by Faith Chaibva, Michael Burton and Roderick B. Walker
Pharmaceutics 2010, 2(2), 182-198; https://doi.org/10.3390/pharmaceutics2020182 - 06 May 2010
Cited by 31 | Viewed by 10986
Abstract
An artificial neural network was used to optimize the release of salbutamol sulfate from hydrophilic matrix formulations. Model formulations to be used for training, testing and validating the neural network were manufactured with the aid of a central composite design with varying the [...] Read more.
An artificial neural network was used to optimize the release of salbutamol sulfate from hydrophilic matrix formulations. Model formulations to be used for training, testing and validating the neural network were manufactured with the aid of a central composite design with varying the levels of Methocel® K100M, xanthan gum, Carbopol® 974P and Surelease® as the input factors. In vitro dissolution time profiles at six different sampling times were used as target data in training the neural network for formulation optimization. A multi layer perceptron with one hidden layer was constructed using Matlab®, and the number of nodes in the hidden layer was optimized by trial and error to develop a model with the best predictive ability. The results revealed that a neural network with nine nodes was optimal for developing and optimizing formulations. Simulations undertaken with the training data revealed that the constructed model was useable. The optimized neural network was used for optimization of formulation with desirable release characteristics and the results indicated that there was agreement between the predicted formulation and the manufactured formulation. This work illustrates the possible utility of artificial neural networks for the optimization of pharmaceutical formulations with desirable performance characteristics. Full article
(This article belongs to the Special Issue What's on Board in Pharmaceutics)
Show Figures

Graphical abstract

306 KiB  
Article
Quantitative Determination of ABT-925 in Human Plasma by On-Line SPE and LC-MS/MS: Validation and Sample Analysis in Phase II Studies
by Katty Wan, Matthew Rieser and Tawakol El-Shourbagy
Pharmaceutics 2010, 2(2), 171-181; https://doi.org/10.3390/pharmaceutics2020171 - 04 May 2010
Cited by 2 | Viewed by 7470
Abstract
A fully automated 96-well On-Line Solid Phase Extraction (SPE) followed by High Performance Liquid Chromatography (HPLC)-Tandem Mass Spectrometric (MS/MS) method for the determination of ABT-925 (2-{3-[4-(2-tert-Butyl-6-trifluoromethyl-pyrimidin-4-yl)-piperazin-1-yl)-propyl-sulfanyl}-3H-pyrimidin-4-one fumarate) in human plasma was developed, validated and utilized in Phase II clinical studies. 50 µL of [...] Read more.
A fully automated 96-well On-Line Solid Phase Extraction (SPE) followed by High Performance Liquid Chromatography (HPLC)-Tandem Mass Spectrometric (MS/MS) method for the determination of ABT-925 (2-{3-[4-(2-tert-Butyl-6-trifluoromethyl-pyrimidin-4-yl)-piperazin-1-yl)-propyl-sulfanyl}-3H-pyrimidin-4-one fumarate) in human plasma was developed, validated and utilized in Phase II clinical studies. 50 µL of plasma sample was fortified with internal standard (IS, d8-ABT-925) and extracted on-line with Cohesive Turbo Flow Cyclone P HTLC column. The chromatographic separation was performed on Aquasil C18 (3 μm 50 × 3 mm) HPLC column with a mobile phase consisting of 50/50/0.1 (v/v/v) ACN/H2O/formic acid. The mass spectrometric measurement was conducted under positive ion mode using multiple reaction monitoring (MRM) of m/z 457.4 → 329.4 for analyte and m/z 465.5 → 337.5 for IS.The peak area ratio (analyte/IS) was used to quantitate ABT-925. A dynamic range of 0.0102 μg/mL to 5.24 μg/mL was established after the validation. The validated method was then used for two Phase II studies. To demonstrate the method reproducibility, approximately 10% of the incurred samples from one study were repeated in singlet. The repeated values were compared to the initial values. All repeated values agreed within ±15% of the mean values. Full article
(This article belongs to the Special Issue Applications of Hyphenated Chromatography Techniques in Pharmaceutics)
Show Figures

Figure 1

165 KiB  
Article
Strategies for Developing Sensitive and Automated LC-MS/MS Assays of a Pharmaceutical Compound and Its Metabolite from Whole Blood Matrix
by Raymond N. Xu, Jill Polzin, Michelle Kranz, Phillip Vaca, Maria Metchkarova, Matthew J. Rieser and Tawakol A. El-Shourbagy
Pharmaceutics 2010, 2(2), 159-170; https://doi.org/10.3390/pharmaceutics2020159 - 30 Apr 2010
Cited by 1 | Viewed by 7854
Abstract
When compared with biological samples in other matrices (plasma, urine, etc.) that are typically seen in bioanalytical applications, whole blood samples present unique challenges in method development, because of the viscous nature of blood and complexity of its constituents. In this article, [...] Read more.
When compared with biological samples in other matrices (plasma, urine, etc.) that are typically seen in bioanalytical applications, whole blood samples present unique challenges in method development, because of the viscous nature of blood and complexity of its constituents. In this article, we have developed and validated a series of quantitative bioanalytical methods for the determination of a pharmaceutical compound, Compound A, and its phosphate metabolite from whole blood matrices using liquid chromatography tandem mass spectrometry. All methods employed a simple protein precipitation procedure that was automated in 96-well format. The methods were subjected to vigorous tests in precision, accuracy, matrix effect, reproducibility, and robustness. Monolithic chromatography was used to improve sample throughput in one of the methods. The results also demonstrated that proper sample preparation procedures, such as sample transfer and lysing of blood cells prior to the extraction, are key to reproducible results for pharmacokinetic parameter determination. Full article
(This article belongs to the Special Issue What's on Board in Pharmaceutics)
Show Figures

Figure 1

625 KiB  
Article
Diclofenac Salts. V. Examples of Polymorphism among Diclofenac Salts with Alkyl-hydroxy Amines Studied by DSC and HSM
by Adamo Fini, Cristina Cavallari and Francesca Ospitali
Pharmaceutics 2010, 2(2), 136-158; https://doi.org/10.3390/pharmaceutics2020136 - 27 Apr 2010
Cited by 22 | Viewed by 11101
Abstract
Nine diclofenac salts prepared with alkyl-hydroxy amines were analyzed for their properties to form polymorphs by DSC and HSM techniques. Thermograms of the forms prepared from water or acetone are different in most cases, suggesting frequent examples of polymorphism among these salts. Polymorph [...] Read more.
Nine diclofenac salts prepared with alkyl-hydroxy amines were analyzed for their properties to form polymorphs by DSC and HSM techniques. Thermograms of the forms prepared from water or acetone are different in most cases, suggesting frequent examples of polymorphism among these salts. Polymorph transition can be better highlighted when analysis is carried out by thermo-microscopy, which in most cases made it possible to observe the processes of melting of the metastable form and re-crystallization of the stable one. Solubility values were qualitatively related to the crystal structure of the salts and the molecular structure of the cation. Full article
(This article belongs to the Special Issue What's on Board in Pharmaceutics)
Show Figures

Figure 1

4875 KiB  
Article
Transcellular Transport of Heparin-coated Magnetic Iron Oxide Nanoparticles (Hep-MION) Under the Influence of an Applied Magnetic Field
by Kyoung Ah Min, Faquan Yu, Victor C. Yang, Xinyuan Zhang and Gus R. Rosania
Pharmaceutics 2010, 2(2), 119-135; https://doi.org/10.3390/pharmaceutics2020119 - 26 Apr 2010
Cited by 17 | Viewed by 10035
Abstract
In this study, magnetic iron oxide nanoparticles coated with heparin (Hep-MION) were synthesized and the transcellular transport of the nanoparticles across epithelial cell monolayers on porous polyester membranes was investigated. An externally applied magnetic field facilitated the transport of the Hep-MION across cell [...] Read more.
In this study, magnetic iron oxide nanoparticles coated with heparin (Hep-MION) were synthesized and the transcellular transport of the nanoparticles across epithelial cell monolayers on porous polyester membranes was investigated. An externally applied magnetic field facilitated the transport of the Hep-MION across cell monolayers. However, high Hep-MION concentrations led to an increased aggregation of nanoparticles on the cell monolayer after application of the magnetic field. Our results indicate that magnetic guidance of Hep-MION most effectively promotes transcellular transport under conditions that minimize formation of magnetically-induced nanoparticle aggregates. Across cell monolayers, the magnet’s attraction led to the greatest increase in mass transport rate in dilute dispersions and in high serum concentrations, suggesting that magnetic guidance may be useful for in vivo targeting of Hep-MION. Full article
(This article belongs to the Special Issue What's on Board in Pharmaceutics)
Show Figures

Graphical abstract

384 KiB  
Article
Automatic Supported Liquid Extraction (SLE) Coupled with HILIC-MS/MS: An Application to Method Development and Validation of Erlotinib in Human Plasma
by Jiongwei Pan, Xiangyu Jiang and Yu-Luan Chen
Pharmaceutics 2010, 2(2), 105-118; https://doi.org/10.3390/pharmaceutics2020105 - 01 Apr 2010
Cited by 34 | Viewed by 11620
Abstract
A novel bioanalytical method was developed and validated for the quantitative determination of erlotinib in human plasma by using the supported liquid extraction (SLE) sample cleanup coupled with hydrophilic interaction liquid chromatography and tandem mass spectrometric detection (HILIC-MS/MS). The SLE extract could be [...] Read more.
A novel bioanalytical method was developed and validated for the quantitative determination of erlotinib in human plasma by using the supported liquid extraction (SLE) sample cleanup coupled with hydrophilic interaction liquid chromatography and tandem mass spectrometric detection (HILIC-MS/MS). The SLE extract could be directly injected into the HILIC-MS/MS system for analysis without the solvent evaporation and reconstitution steps. Therefore, the method is simple and rapid. In the present method, erlotinib-d6 was used as the internal standard. The SLE extraction recovery was 101.3%. The validated linear curve range was 2 to 2,000 ng/mL based on a sample volume of 0.100-mL, with a linear correlation coefficient of > 0.999. The validation results demonstrated that the present method gave a satisfactory precision and accuracy: intra-day CV < 5.9% (<8.4% for the lower limit of quantitation, LLOQ) with n = 6 and the accuracy of 98.0–106.0%; inter-day CV < 3.2% (<1.5% for LLOQ) with n = 18 and the accuracy of 100.0–103.2%. A dilution factor of 10 with blank plasma was validated for partial volume analysis. The stability tests indicated that the erlotinib in human plasma is stable for three freeze-thaw cycles (100.0–104.5% of the nominal values), or 24-h ambient storage (100.0–104.8% of the nominal values), or 227-day frozen storage at both -20 ºC (91.5–94.5% of the nominal values) and -70 ºC (93.3–93.8% of the nominal values). The results also showed no significant matrix effect (<6.3%) even with direct injection of organic extract into the LC-MS/MS system. The validated method has been successfully applied to support a clinical study. Full article
(This article belongs to the Special Issue Applications of Hyphenated Chromatography Techniques in Pharmaceutics)
Show Figures

Figure 1

432 KiB  
Article
Radiolabelling of Antigen and Liposomes for Vaccine Biodistribution Studies
by Malou Henriksen-Lacey, Vincent Bramwell and Yvonne Perrie
Pharmaceutics 2010, 2(2), 91-104; https://doi.org/10.3390/pharmaceutics2020091 - 31 Mar 2010
Cited by 13 | Viewed by 8254
Abstract
A relatively simple and effective method to follow the movement of pharmaceutical preparations such as vaccines in biodistribution studies is to radiolabel the components. Whilst single radiolabelling is common practice, in vaccine systems containing adjuvants the ability to follow both the adjuvant and [...] Read more.
A relatively simple and effective method to follow the movement of pharmaceutical preparations such as vaccines in biodistribution studies is to radiolabel the components. Whilst single radiolabelling is common practice, in vaccine systems containing adjuvants the ability to follow both the adjuvant and the antigen is favourable. To this end, we have devised a dual-radiolabelling method whereby the adjuvant (liposomes) is labelled with 3H and the antigen (a subunit protein) with 125I. This model is stable and reproducible; we have shown release of the radiolabels to be negligible over periods of up to 1 week in foetal calf serum at 37 ºC. In this paper we describe the techniques which enable the radiolabelling of various components, assessing stability and processing of samples which all for their application in biodistribution studies. Furthermore we provide examples derived from our studies using this model in tuberculosis vaccine biodistribution studies. Full article
(This article belongs to the Special Issue What's on Board in Pharmaceutics)
Show Figures

Figure 1

650 KiB  
Article
Assessment of Thermal Transitions by Dynamic Mechanical Analysis (DMA) Using a Novel Disposable Powder Holder
by Mohamad G. Abiad, Osvaldo H. Campanella and M. Teresa Carvajal
Pharmaceutics 2010, 2(2), 78-90; https://doi.org/10.3390/pharmaceutics2020078 - 24 Mar 2010
Cited by 35 | Viewed by 10808
Abstract
Foods and pharmaceuticals materials are exposed to various environmental conditions during processing and while in storage; therefore, stability and quality are key attributes of concern. The properties of foods and pharmaceutical materials that define their quality are affected by conditions such as temperature, [...] Read more.
Foods and pharmaceuticals materials are exposed to various environmental conditions during processing and while in storage; therefore, stability and quality are key attributes of concern. The properties of foods and pharmaceutical materials that define their quality are affected by conditions such as temperature, humidity and time. Glass transition is considered a key material property to understand how these external conditions affect the stability and quality of foods and pharmaceuticals. Thus, investigating the thermo-mechanical properties of these materials as well as characterizing the glass transition temperature have a great interest not only in the food industry, but also extend to the pharmaceutical and polymer industries. The aim of this study was to design and test a new disposable powder holder that allows the use of a dynamic mechanical analysis (DMA) instrument to test and characterize loose powder samples. The disposable aluminum powder holder was designed and constructed to be used in the single cantilever configuration on a TA Instruments RSA III DMA. Three different powder samples – Felodipine, polyethylene-oxide (MW 900 kDa) and HPMC (E4M) – were used for validation. The use of this powder holder allows the detection of different thermal changes of powder samples without compacting and when large sample size is necessary for detection and/or interpretation. Full article
Show Figures

Graphical abstract

Previous Issue
Next Issue
Back to TopTop